压缩机最低功率，加热棒52%

.gitignore

@@ -0,0 +1 @@
+OBJ/*

.vscode/settings.json

@@ -0,0 +1,6 @@
+{
+    "files.associations": {
+        "w25q128_ins.h": "c",
+        "usart.h": "c"
+    }
+}

HARDWARE/PID.c

@@ -1,6 +1,7 @@
 #include "PID.h"
 #include "Relays.h"
 #include "USART.h"
+#include "rs485.h"
 extern u16 tem;
 float cold_tem = 0;
 float red_tem = 0;
@@ -12,109 +13,157 @@ extern u8 gpio_state;
 extern int T;
 unsigned int num = 0;
 PID pid;
+u8 rs485speed[8] = {0x01, 0x06, 0x60, 0x00, 0x00, 0x09, 0xBB, 0xAA}; // speed control for compressor controller
+int min_speed_count = 1500;
+int max_speed_count = 6000;
 
 void PID_Init()
 {
-	// pid.set_tem=tem;//用户设定温度
+	// pid.set_tem=tem;// user set temperature
-	pid.Kp = 110;
+	// if flash have not a vaild value, just set a default value
-	pid.t = 500; // PID计算周期
+	if (pid.Kp < 1e-7) { pid.Kp = 40; }
-	// pid.Ti=5000000;//积分时间
+	if (pid.Ki < 1e-7) { pid.Ki = 0.001; }
-	// pid.Td=1000;//微分时间
+	if (pid.Kd < 1e-7) { pid.Kd = 340; }
-	pid.pwmcycle = 200; // pwm周期200
+	if (pid.tem_threshold < 0.0001) { pid.tem_threshold = 0.2; }
+
+	pid.t = 500; // PID calc period
+	// pid.Ti=5000000;// integral time
+	// pid.Td=1000;// differential time
+	pid.pwmcycle = 200; // pwm cycle 200
 	pid.OUT0 = 1;
 	pid.C1ms = 0;
 }
 
-void PID_Calc() // pid计算
+/**
+ * send speed count to compressor controller
+*/
+void send_speed_signal(int speed) {
+	rs485speed[4] = speed / 256;
+	rs485speed[5] = speed % 256;
+	
+	RS485_3_Init(9600);
+	RS485_3_Send_Data(rs485speed, 8);
+	delay_xms(30);
+	RS485_1_Init(9600);
+}
+
+void PID_Calc() // pid calc
 {
-	float DelEk; // 最近两次偏差之差
+	// float DelEk; // The difference between the last two deviations
-	// float td;
+	// // float td;
-	float out;
+	// float out;
-	if (pid.C1ms < (pid.t)) // 计算周期未到
+	// if (pid.C1ms < (pid.t)) // The calculation cycle has not yet arrived
-	{
+	// {
-		return;
+	// 	return;
-	}
+	// }
-
+
-	if (pid.set_tem > pid.now_tem)
+	// // if (pid.set_tem > pid.now_tem)
-	{
+	// // {
-		pid.Ek = pid.set_tem - pid.now_tem;
+	// // 	pid.Ek = pid.set_tem - pid.now_tem;
-	}
+	// // }
-	else
+	// // else
-	{
+	// // {
-		pid.Ek = pid.now_tem - pid.set_tem;
+	// // 	pid.Ek = pid.now_tem - pid.set_tem;
-	}
+	// // }
-	pid.Pout = pid.Kp * pid.Ek; // 比例输出
+	// pid.Ek = pid.now_tem - pid.set_tem;
-
+	// pid.Pout = pid.Kp * pid.Ek; // Proportional output
-	pid.SEk += pid.Ek; // 历史偏差总和
+
-
+	// pid.SEk += pid.Ek; // Total historical deviation
-	DelEk = pid.Ek - pid.Ek_1; // 最近两次偏差之差
+
-
+	// DelEk = pid.Ek - pid.Ek_1; // The difference between the last two deviations
-	// ti=pid.t/pid.Ti;
+
-	// ki=ti*pid.Kp;
+	// // ti=pid.t/pid.Ti;
-
+	// // ki=ti*pid.Kp;
-	pid.Iout = ki * pid.SEk; // 积分输出
+
-
+	// pid.Iout = pid.Ki * pid.SEk; // integral output
-	// 	td=pid.Td/pid.t;
+
-	// 	kd=pid.Kp*td;
+	// // 	td=pid.Td/pid.t;
-
+	// // 	kd=pid.Kp*td;
-	pid.Dout = kd * DelEk; // 微分输出
+
-	if (pid.Dout < 0)
+	// pid.Dout = pid.Kd * DelEk; // difference output
-	{
+	// if (pid.Dout < 0)
-		pid.Dout = 0 - pid.Dout;
+	// {
-	}
+	// 	pid.Dout = 0 - pid.Dout;
-
+	// }
-	// out= pid.Pout+pid.Iout+ pid.Dout;
+
-	out = pid.Pout;
+	// // out= pid.Pout+pid.Iout+ pid.Dout;
-	if (out > pid.pwmcycle)
+	// out = pid.Pout;
-	{
+	// if (out > pid.pwmcycle)
-		pid.OUT = pid.pwmcycle;
+	// {
-	}
+	// 	pid.OUT = pid.pwmcycle;
-	else if (out <= 0)
+	// }
-	{
+	// else if (out <= 0)
-		pid.OUT = pid.OUT0;
+	// {
-	}
+	// 	pid.OUT = pid.OUT0;
-	else
+	// }
-	{
+	// else
-		pid.OUT = out;
+	// {
-	}
+	// 	pid.OUT = out;
-	pid.Ek_1 = pid.Ek; // 更新偏差
+	// }
-	pid.C1ms = 0;
+	// pid.Ek_1 = pid.Ek; // udpate difference
+	// pid.C1ms = 0;
+
+	// // speed count
+	// int speed_count = pid.OUT / 200.0 * (max_speed_count - min_speed_count) + min_speed_count;
+	// if (speed_count > 6000) {
+	// 	speed_count = 6000;
+	// }
+
+	// if (pid.now_tem < pid.set_tem + pid.tem_offset - pid.tem_threshold)
+	// {
+	// 	// Obtain the current deviation value
+	// 	// when the target temperature is 1 degree Celsius higher than the actual temperature, heat up
+	// 	// close compressor open heater
+	// 	/*GPIO1->Alarm bell GPIO3->heater GPIO4->Fresh air fan GPIO5->humidifier GPIO6->compressor  */
+	// 	// HC595_Send_Byte(gpio_state &= 0xDF);//close compressor		&=1101 1111	    0xDF
+	// 	HC595_Send_Byte(gpio_state |= 0x04); // open heater    |=0000 0100  0x04
+	// 	speed_count = 1000; // close compressor
+	// 	hot_clod_flag = 2;
+	// 	pid.Iout = 0;
+	// } else if (pid.now_tem > pid.set_tem + pid.tem_offset - pid.tem_threshold && pid.now_tem < pid.set_tem + pid.tem_offset + pid.tem_threshold)
+	// {
+	// 	HC595_Send_Byte(gpio_state &= 0xFB);		  // close heater &=1111 1011  0xFB
+	// 	speed_count = 1000; // close compressor
+
+	// 	hot_clod_flag = 0;
+	// 	// pid.Iout=0;
+	// } else if (pid.now_tem > pid.set_tem + pid.tem_offset + pid.tem_threshold)
+	// {
+	// 	// Obtain the current deviation value
+	// 	// when the target temperature is lower than the actual temperature, refrigerate
+	// 	// open compressor close heater
+	// 	HC595_Send_Byte(gpio_state &= 0xFB);		  // close heater &=1111 1011  0xFB
+
+
+	// 	// // 0-200 correspond 0-100%, if pid.out=50, percentage means 25% //num=50*400/200=100 100/400=25%
+	// 	// num = (((pid.OUT * 400) / pid.pwmcycle) - 1); // Conversion of pid.OUT and PWM Duty Cycle Values
+	// 	// TIM_SetCompare3(TIM3, num / 4);
+	// 	// printf("%d\r\n",num);
+	// 	// HC595_Send_Byte(gpio_state|=0x20);//open compressor |=0010 0000
+	// 	hot_clod_flag = 1;
+	// 	// pid.Iout=0;
+	// }
+
+	// send_speed_signal(speed_count);
+	send_speed_signal(1500);
+
+	// if (hot_clod_flag == 1 && T <= tem - 3) // During the refrigeration process, the actual temperature drops by 0.3 degrees Celsius below the set temperature
+	// {
+	// 	HC595_Send_Byte(gpio_state&=0xDB);// close compressor and heater		   &=1101 1011       0xDB
+	// 	// num = 0;
+	// 	// TIM_SetCompare3(TIM3, 0);			 // close compressor
+	// 	speed_count = 1000;
+	// 	hot_clod_flag = 0;
+	// }
+
+	// if (hot_clod_flag == 2 && T >= tem) // while heat, T above tem
+	// {
+	// 	HC595_Send_Byte(gpio_state&=0xDB);//close compressor and heater    &=1101 1011       0xDB
+	// 	num = 0;
+	// 	TIM_SetCompare3(TIM3, 0);			 // close compressor
+	// 	hot_clod_flag = 0;
+	// }
+
 
-	if (pid.set_tem > pid.now_tem + 1)
+	// HC595_Send_Byte(gpio_state&=0xDB);// close compressor and heater		   &=1101 1011       0xDB
-	{
-		// 得到当前的偏差值，设置温度大于实际温度1℃，加热，关闭压缩机，打开加热棒
-		/*GPIO1->报警铃 GPIO6->压缩机 GPIO3->加热棒 GPIO4—>新风风扇 GPIO5->加湿器  */
-		// HC595_Send_Byte(gpio_state&=0xDF);//关闭压缩机		&=1101 1111	    0xDF
-		TIM_SetCompare3(TIM3, 0);
-		HC595_Send_Byte(gpio_state |= 0x04); // 打开加热棒    |=0000 0100  0x04
-		hot_clod_flag = 2;
-		pid.Iout = 0;
-	}
-	if (pid.now_tem > pid.set_tem)
-	{
-		// 得到当前的偏差值，设置温度小于实际温度，制冷，打开压缩机，关闭加热棒
-		HC595_Send_Byte(gpio_state &= 0xFB);		  // 关闭加热棒 &=1111 1011  0xFB
-		num = (((pid.OUT * 400) / pid.pwmcycle) - 1); // 请问这个pid.OUT与pwm占空比的值是如何换算过来的
-		TIM_SetCompare3(TIM3, num);
-		// printf("%d\r\n",num);
-		// 0-200对应0-100%，如果pid.out=50,占空比就是25%，//num=50*400/200=100，100/400=25%
-		// HC595_Send_Byte(gpio_state|=0x20);//打开压缩机 |=0010 0000
-		hot_clod_flag = 1;
-		// pid.Iout=0;
-	}
-	if (hot_clod_flag == 1 && T <= tem - 3) // 制冷过程中温度下降低于设定温度0.3℃
-	{
-		// HC595_Send_Byte(gpio_state&=0xDB);//关闭压缩机 关闭加热棒		   &=1101 1101       0xDB
-		TIM_SetCompare3(TIM3, 0);			 // 关闭压缩机
-		HC595_Send_Byte(gpio_state &= 0xFB); // 关闭加热棒
-		hot_clod_flag = 0;
-	}
-
-	if (hot_clod_flag == 2 && T >= tem)
-	{
-		// HC595_Send_Byte(gpio_state&=0xDB);//关闭压缩机	 关闭四通阀    &=1101 1101       0xDB
-		TIM_SetCompare3(TIM3, 0);			 // 关闭压缩机
-		HC595_Send_Byte(gpio_state &= 0xFB); // 关闭加热棒
-		hot_clod_flag = 0;
-	}
 }

HARDWARE/PID.h

@@ -1,22 +1,26 @@
 #ifndef  _PID_H
 #define  _PID_H
 
+#include "SysTick.h"
+
 void PID_Init(void);
 void PID_Calc(void);
 
 typedef struct Pid
 {
- 	float set_tem;//用户设定值
+ 	float set_tem;// User settings
- 	float now_tem;//当前温度
+ 	float now_tem;// current temperature
  
- 	float Kp;
+ 	float Kp; // 110
- 	int t;  //PID计算周期--采样周期
+	float Ki; // 0.001
+	float Kd; // 340
+ 	int t;  // PID calculation cycle - sampling cycle
  	float Ti;
  	float Td;
 	
- 	float Ek;  //本次偏差
+ 	float Ek;  // This deviation
-	float Ek_1;//上次偏差
+	float Ek_1;// Last deviation
-	float SEk; //历史偏差之和
+	float SEk; // The sum of historical deviations
 	
 	float Iout;
 	float Pout;
@@ -28,9 +32,13 @@ typedef struct Pid
 
  	int C1ms;
 	
- 	int pwmcycle;//pwm周期
+ 	int pwmcycle;// PWM cycle
  
  	int times;
+
+	float tem_offset;
+	
+	float tem_threshold;
 }PID;
 
 extern PID pid;

HARDWARE/bufcut.c

@@ -2,14 +2,16 @@
 #include <stdio.h>
 #include "rs485.h"
 //u8 rx_buf[64];
+
 extern u8 RS485_RX_BUF_COPY[128];
-void  bufcut_Init(u8 *RX_BUF,u8 *CUT_RX_BUF,u8 start_index, u8 end_index)
+
+void  bufcut_Init(u8 *TARGET_RX_BUF,u8 *SOURCE_CUT_RX_BUF,u8 start_index, u8 end_index)
 {
    int i, j = 0;
 
    for (i = start_index; i < end_index; i++) 
 	 {
-      RX_BUF[j] = CUT_RX_BUF[i];
+      TARGET_RX_BUF[j] = SOURCE_CUT_RX_BUF[i];
       j++;
    }
 }
@@ -17,14 +19,14 @@ void  bufcut_Init(u8 *RX_BUF,u8 *CUT_RX_BUF,u8 start_index, u8 end_index)
 void RX_BUF_Init(void)
 {
   int i=0;
-	for(i=0;i<64;i++)
+	for(i=0;i<128;i++)
 	{
 		RS485_RX_BUF[i]=0;
 	}
 	
 }
 
-void RX_BUF_ZERO(u8 num)//把处理过的数组变为0
+void RX_BUF_ZERO(u8 num)// set RS485_RX_BUF_COPY to 0
 {
 	for(int i=0;i<num;i++)
 	{
@@ -39,14 +41,19 @@ void RX_BUF_Transfer(u8 zero,u8 transfer_num)//
 	 
 	 for (i = zero; i < 128 - transfer_num; i++)
 	 {
+			RS485_RX_BUF[i] = RS485_RX_BUF[i + transfer_num];
 			RS485_RX_BUF_COPY[i] = RS485_RX_BUF_COPY[i + transfer_num];
 	 }
 	 for (i = 128 - transfer_num; i < 128; i++)
 	 {
+			RS485_RX_BUF[i] = 0;
 			RS485_RX_BUF_COPY[i] = 0;
 	 }
 	 
-	 //RS485_RX_CNT -= transfer_num;
+	 RS485_RX_CNT -= transfer_num;
+	 if (RS485_RX_CNT < 0) {
+		RS485_RX_CNT = 0;
+	 }
 }
 
 

HARDWARE/bufcut.h

@@ -3,7 +3,7 @@
 
 #include "system.h" 
 
-u8  bufcut_Init(u8 *RX_BUF,u8 *CUT_RX_BUF,u8 start_index, u8 end_index);
+u8  bufcut_Init(u8 *TARGET_RX_BUF,u8 *SOURCE_CUT_RX_BUF,u8 start_index, u8 end_index);
 void RX_BUF_Init(void);
 void RX_BUF_ZERO(u8 num);
 void RX_BUF_Transfer(u8 zero,u8 transfer_num);

HARDWARE/rs485.c

@@ -4,8 +4,10 @@
 #include "Relays.h"
 #include "myfreertos.h"
 
-u8 sendbuf[29] = {0xEE, 0xB5, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+u8 prev_sendbuf[41] = {0xEE, 0xB5, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-				  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFC, 0xFF, 0xFF}; // 发送给串口屏的实时数据
+				  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFC, 0xFF, 0xFF}; 
+u8 sendbuf[41] = {0xEE, 0xB5, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+				  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFC, 0xFF, 0xFF}; 
 u8 sendbuf_crc[20] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 					  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
 extern u8 global_buffer[64];
@@ -45,6 +47,7 @@ u8 crc_num2 = 0xFF;
 extern int T;
 extern int H;
 extern int C;
+extern PID pid;
 // extern u16 RED_LIGHT;
 // extern u16 WHITE_LIGHT;
 // extern u16 BLUE_LIGHT;
@@ -54,7 +57,7 @@ extern int C;
 // extern u8 white_light2;
 // extern u8 blue_light1;
 // extern u8 blue_light2;
-// CRC校验 自己后面添加的
+// CRC verifies the information added later on
 const u8 auchCRCHi[] = {
 	0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
 	0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
@@ -85,11 +88,29 @@ const u8 auchCRCLo[] = {
 	0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
 	0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80, 0x40};
 
-u8 RS485_RX_BUF[128]; // 接收缓冲,最大64个字节.
+u8 RS485_RX_BUF[128];
 
-u8 RS485_RX_CNT = 0; // 接收到的数据长度
+u8 RS485_RX_CNT = 0;
 
-u8 RS485_RX_Flag = 0; // 接收到的数据标志
+u8 RS485_RX_Flag = 0;
+
+/**
+ * return 1 if diff, 0 if same
+*/
+u8 cmp_str(u8 *prev, u8*curr, u8 len) {
+	for (u8 i = 0; i < len; i++) {
+		if (prev[i] != curr[i]) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+void cp_str_to_prev(u8 *prev, u8*curr, u8 len) {
+	for (u8 i = 0; i < len; i++) {
+		prev[i] = curr[i];
+	}
+}
 
 void GetCRC16(u8 *puchMsg, u16 usDataLen, u8 *uchCRCHi, u8 *uchCRCLo)
 {
@@ -104,7 +125,10 @@ void GetCRC16(u8 *puchMsg, u16 usDataLen, u8 *uchCRCHi, u8 *uchCRCLo)
 	}
 	// return ((uchCRCHi<< 8)  | (uchCRCLo)) ;
 }
-// 查表法计算CRC值并且校验
+/**
+ * Calculate CRC value using lookup table method and verify
+ * @return int 1 means success, 0 means false
+*/
 u8 CRC16_check(u8 *puchMsg, u16 usDataLen)
 {
 	u8 uchCRCHi = 0xFF;
@@ -118,7 +142,6 @@ u8 CRC16_check(u8 *puchMsg, u16 usDataLen)
 	}
 	if (uchCRCHi == *puchMsg++ && uchCRCLo == *puchMsg++)
 	{
-		// printf("CRC 校验成功\r\n");  // 调试使用
 		return 1;
 	}
 	else
@@ -128,13 +151,13 @@ void USART1_IRQHandler(void)
 {
 	u8 res;
 
-	if (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) // 接收到数据
+	while (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) // receive data
 	{
-		res = USART_ReceiveData(USART1); // 读取接收到的数据
+		res = USART_ReceiveData(USART1); // read received data
 		if (RS485_RX_CNT < 128)
 		{
-			RS485_RX_BUF[RS485_RX_CNT] = res; // 记录接收到的值
+			RS485_RX_BUF[RS485_RX_CNT] = res; // Record received values
-			RS485_RX_CNT++;					  // 接收数据增加1
+			RS485_RX_CNT++;					  // Received data count increased by 1
 		}
 	}
 }
@@ -142,189 +165,186 @@ void USART1_IRQHandler(void)
 void SN74CB3Q3253_Init(void)
 {
 
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); // 使能PB端口时钟
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); 
 
 	GPIO_InitTypeDef GPIO_InitStructure;
 
-	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7; // PB5 PB6 PB7 端口配置, 推挽输出
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7; // PB5 PB6 PB7
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;					// 推挽输出
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;					
-	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;					// IO口速度为50MHz
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;					// IO??????50MHz
-	GPIO_Init(GPIOB, &GPIO_InitStructure);								// 推挽输出 ，IO口速度为50MHz
+	GPIO_Init(GPIOB, &GPIO_InitStructure);								
-	GPIO_ResetBits(GPIOB, GPIO_Pin_7);									// PB7输出低
+	GPIO_ResetBits(GPIOB, GPIO_Pin_7);									// PB7?????
 }
 
-// RS485_1_Init->J6 ，PB5->S1,PB6->S0,PB7->USART_OE
+// RS485_1_Init->J6 ??PB5->S1,PB6->S0,PB7->USART_OE
-// SN74CB3Q3253多路复用器 - 多路信号分离器的引脚配置为OE S1 S0对应的值为001，使1B2 2B2响应
+// SN74CB3Q3253??<3F><>?????? - ??<3F><>???????????????????OE S1 S0???????001???1B2 2B2???
-// 初始化IO 串口1
+
-// pclk1:PCLK1时钟频率(Mhz)
+// pclk1:PCLK1??????(Mhz)
-// bound:波特率
+// bound:??????
 void RS485_1_Init(u32 bound)
 {
 
 	SN74CB3Q3253_Init();
-	GPIO_ResetBits(GPIOB, GPIO_Pin_5); // S1配置为低电平
+	GPIO_ResetBits(GPIOB, GPIO_Pin_5); // S1?????????
-	GPIO_SetBits(GPIOB, GPIO_Pin_6);   // S0配置为高电平
+	GPIO_SetBits(GPIOB, GPIO_Pin_6);   // S0?????????
 
 	GPIO_InitTypeDef GPIO_InitStructure;
 	USART_InitTypeDef USART_InitStructure;
 	NVIC_InitTypeDef NVIC_InitStructure;
 
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE); // 使能GPIOA,D时钟
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE); 
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);						 // 使能USART1时钟
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);						 
 
-	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;		 // 端口配置
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;		 
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; // 推挽输出
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; 
 	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
 	GPIO_Init(GPIOB, &GPIO_InitStructure);
 
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;		// PA9
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; // 复用推挽
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; 
 	GPIO_Init(GPIOA, &GPIO_InitStructure);
 
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;			  // PA10
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; // 浮空输入
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; 
 	GPIO_Init(GPIOA, &GPIO_InitStructure);
 
-	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);	// 复位串口1
+	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);	
-	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); // 停止复位
+	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); 
 
-	USART_InitStructure.USART_BaudRate = bound;										// 波特率设置
+	USART_InitStructure.USART_BaudRate = bound;										
-	USART_InitStructure.USART_WordLength = USART_WordLength_8b;						// 8位数据长度
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;				
-	USART_InitStructure.USART_StopBits = USART_StopBits_1;							// 一个停止位
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;							
-	USART_InitStructure.USART_Parity = USART_Parity_No;								/// 奇偶校验位
+	USART_InitStructure.USART_Parity = USART_Parity_No;								
-	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; // 无硬件数据流控制
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; 
-	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;					// 收发模式
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;					
 	USART_Init(USART1, &USART_InitStructure);
-	; // 初始化串口
 
-	NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;		  // 使能串口1中断
+	NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;		  
-	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; // 先占优先级2级
+	// NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; 
-	// NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; //从优先级2级
+	// // NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; //???????2??
-	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; // 使能外部中断通道
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 5; 
-	NVIC_Init(&NVIC_InitStructure);					// 根据NVIC_InitStruct中指定的参数初始化外设NVIC寄存器
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; 
+	NVIC_Init(&NVIC_InitStructure);					
 
-	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); // 开启中断
+	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); 
-	USART_Cmd(USART1, ENABLE);					   // 使能串口
+	USART_Cmd(USART1, ENABLE);					   
 
-	RS485_1_TX_EN = 0; // 默认为接收模式
+	RS485_1_TX_EN = 0; 
 }
 
-// RS485_2_Init->J7 ，PB5->S1,PB6->S0,PB7->USART_OE
+// RS485_2_Init->J7 ??PB5->S1,PB6->S0,PB7->USART_OE
-// SN74CB3Q3253多路复用器 - 多路信号分离器的引脚配置为OE S1 S0对应的值为000，使1B1 2B1响应
+// SN74CB3Q3253??<3F><>?????? - ??<3F><>???????????????????OE S1 S0???????000???1B1 2B1???
 void RS485_2_Init(u32 bound)
 {
 
 	SN74CB3Q3253_Init();
-	GPIO_ResetBits(GPIOB, GPIO_Pin_5 | GPIO_Pin_6); // S1,S0配置为低电平
+	GPIO_ResetBits(GPIOB, GPIO_Pin_5 | GPIO_Pin_6);
 
 	GPIO_InitTypeDef GPIO_InitStructure;
 	USART_InitTypeDef USART_InitStructure;
 	NVIC_InitTypeDef NVIC_InitStructure;
 
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE); // 使能GPIOA,D时钟
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE); 
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);						 // 使能USART1时钟
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);						 
 
-	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;		 // 端口配置
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;		 
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; // 推挽输出
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; 
 	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
 	GPIO_Init(GPIOB, &GPIO_InitStructure);
 
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;		// PA9
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; // 复用推挽
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; 
 	GPIO_Init(GPIOA, &GPIO_InitStructure);
 
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;			  // PA10
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; // 浮空输入
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; 
 	GPIO_Init(GPIOA, &GPIO_InitStructure);
 
-	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);	// 复位串口1
+	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);	
-	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); // 停止复位
+	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); 
 
-	USART_InitStructure.USART_BaudRate = bound;										// 波特率设置
+	USART_InitStructure.USART_BaudRate = bound;										
-	USART_InitStructure.USART_WordLength = USART_WordLength_8b;						// 8位数据长度
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;				
-	USART_InitStructure.USART_StopBits = USART_StopBits_1;							// 一个停止位
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;							
-	USART_InitStructure.USART_Parity = USART_Parity_No;								/// 奇偶校验位
+	USART_InitStructure.USART_Parity = USART_Parity_No;								
-	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; // 无硬件数据流控制
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; 
-	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;					// 收发模式
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;					
 	USART_Init(USART1, &USART_InitStructure);
-	; // 初始化串口
+	; 
 
-	NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;		  // 使能串口1中断
+	NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;		  
-	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; // 先占优先级2级
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 5; 
-	// NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; //从优先级2级
+	// NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; //???????2??
-	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; // 使能外部中断通道
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; 
-	NVIC_Init(&NVIC_InitStructure);					// 根据NVIC_InitStruct中指定的参数初始化外设NVIC寄存器
+	NVIC_Init(&NVIC_InitStructure);					
 
-	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); // 开启中断
+	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); 
-	USART_Cmd(USART1, ENABLE);					   // 使能串口
+	USART_Cmd(USART1, ENABLE);					   
 
-	RS485_2_TX_EN = 0; // 默认为接收模式
+	RS485_2_TX_EN = 0; 
 }
 
-// RS485_3_Init->J7 ，PB5->S1,PB6->S0,PB7->USART_OE
+// RS485_3_Init->J7 ??PB5->S1,PB6->S0,PB7->USART_OE
-// SN74CB3Q3253多路复用器 - 多路信号分离器的引脚配置为OE S1 S0对应的值为010，使1B3 2B3响应
+// SN74CB3Q3253??<3F><>?????? - ??<3F><>???????????????????OE S1 S0???????010???1B3 2B3???
-
 void RS485_3_Init(u32 bound)
 {
 
 	SN74CB3Q3253_Init();
-	GPIO_ResetBits(GPIOB, GPIO_Pin_6); // S0配置为低电平
+	GPIO_ResetBits(GPIOB, GPIO_Pin_6); // S0?????????
-	GPIO_SetBits(GPIOB, GPIO_Pin_5);   // S1配置为高电平
+	GPIO_SetBits(GPIOB, GPIO_Pin_5);   // S1?????????
 
 	GPIO_InitTypeDef GPIO_InitStructure;
 	USART_InitTypeDef USART_InitStructure;
 	NVIC_InitTypeDef NVIC_InitStructure;
 
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE); // 使能GPIOA,D时钟
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE); 
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);						 // 使能USART1时钟
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);						 
 
-	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;		 // 端口配置
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;		 
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; // 推挽输出
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; 
 	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
 	GPIO_Init(GPIOB, &GPIO_InitStructure);
 
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;		// PA9
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; // 复用推挽
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; 
 	GPIO_Init(GPIOA, &GPIO_InitStructure);
 
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;			  // PA10
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; // 浮空输入
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; 
 	GPIO_Init(GPIOA, &GPIO_InitStructure);
 
-	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);	// 复位串口1
+	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);	
-	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); // 停止复位
+	RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); 
 
-	USART_InitStructure.USART_BaudRate = bound;										// 波特率设置
+	USART_InitStructure.USART_BaudRate = bound;										
-	USART_InitStructure.USART_WordLength = USART_WordLength_8b;						// 8位数据长度
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;						
-	USART_InitStructure.USART_StopBits = USART_StopBits_1;							// 一个停止位
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;							
-	USART_InitStructure.USART_Parity = USART_Parity_No;								/// 奇偶校验位
+	USART_InitStructure.USART_Parity = USART_Parity_No;								
-	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; // 无硬件数据流控制
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; 
-	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;					// 收发模式
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;					
 	USART_Init(USART1, &USART_InitStructure);
-	; // 初始化串口
+	;
 
-	NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;		  // 使能串口1中断
+	NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;		  
-	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; // 先占优先级2级
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; 
-	// NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; //从优先级2级
+	// NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; //???????2??
-	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; // 使能外部中断通道
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; 
-	NVIC_Init(&NVIC_InitStructure);					// 根据NVIC_InitStruct中指定的参数初始化外设NVIC寄存器
+	NVIC_Init(&NVIC_InitStructure);					
 
-	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); // 开启中断
+	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); 
-	USART_Cmd(USART1, ENABLE);					   // 使能串口
+	USART_Cmd(USART1, ENABLE);					   
 
-	RS485_3_TX_EN = 0; // 默认为接收模式
+	RS485_3_TX_EN = 0; 
 }
 
-// RS485发送len个字节.
-// buf:发送区首地址
-// len:发送的字节数(为了和本代码的接收匹配,这里建议不要超过64个字节)
 void RS485_1_Send_Data(u8 *buf, u8 len)
 {
 	u8 t;
 
-	RS485_1_TX_EN = 1; // 设置为发送模式
+	RS485_1_TX_EN = 1;
 
-	for (t = 0; t < len; t++) // 循环发送数据
+	for (t = 0; t < len; t++)
 	{
 		while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET)
 			;
@@ -335,16 +355,16 @@ void RS485_1_Send_Data(u8 *buf, u8 len)
 		;
 	RS485_RX_CNT = 0;
 
-	RS485_1_TX_EN = 0; // 设置为接收模式
+	RS485_1_TX_EN = 0;
 }
 
 void RS485_1_Send_Data_1(u8 *buf, u8 len)
 {
 	u8 t;
 
-	RS485_1_TX_EN = 1; // 设置为发送模式
+	RS485_1_TX_EN = 1;
 
-	for (t = 0; t < len; t++) // 循环发送数据
+	for (t = 0; t < len; t++)
 	{
 		while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET)
 			;
@@ -355,32 +375,32 @@ void RS485_1_Send_Data_1(u8 *buf, u8 len)
 		;
 	// RS485_RX_CNT=0;
 
-	RS485_1_TX_EN = 0; // 设置为接收模式
+	RS485_1_TX_EN = 0;
 }
 
-// RS485发送len个字节.
+void RS485_1_Send_Data_2(void)
-// buf:发送区首地址
-// len:发送的字节数(为了和本代码的接收匹配,这里建议不要超过64个字节)
-void RS485_1_Send_Data_2(void) // 上传温湿度二氧化碳
 {
 	sendbuf[0] = 0xEE;
 	sendbuf[1] = 0xB5;
 	sendbuf[2] = 0x05;
-	sendbuf[25] = 0xFF;
+	sendbuf[37] = 0xFF;
-	sendbuf[26] = 0xFC;
+	sendbuf[38] = 0xFC;
-	sendbuf[27] = 0xFF;
+ 
-	sendbuf[28] = 0xFF;
+	sendbuf[39] = 0xFF;
-	u8 a;
+	sendbuf[40] = 0xFF;
-	RS485_1_TX_EN = 1; // 设置为发送模式
+	// u8 a;
-	if (T <= 500000)
+	if (T <= 1000 && T >= -1000)
 	{
-		TEM1 = RS485_RX_BUF_COPY[3];
+		if (T < 0) {
-		TEM2 = RS485_RX_BUF_COPY[4];
+			T = (~(T - 1)) & 0xFFFF;
+		}
+		TEM1 = (T & 0xFF00) >> 8;
+		TEM2 = T & 0x00FF;
 	}
 	if (H <= 1000)
 	{
-		HUM1 = RS485_RX_BUF_COPY[5];
+		HUM1 = (H & 0xFF00) >> 8;
-		HUM2 = RS485_RX_BUF_COPY[6];
+		HUM2 = H & 0x00FF;
 	}
 	sendbuf[3] = TEM1;
 	sendbuf[4] = TEM2;
@@ -405,72 +425,103 @@ void RS485_1_Send_Data_2(void) //
 		white_light2 = total[14 + 18 * (now_stage - 1)];
 	}
 	sendbuf[7] = red_light1;
-	sendbuf[8] = red_light2; // 红光
+	sendbuf[8] = red_light2;
 	sendbuf[9] = blue_light1;
-	sendbuf[10] = blue_light2; // 蓝光
+	sendbuf[10] = blue_light2;
 	sendbuf[11] = white_light1;
-	sendbuf[12] = white_light2; // 白光
+	sendbuf[12] = white_light2;
 	if (C <= 5000)
 	{
-		CO2_1 = RS485_RX_BUF_COPY[19];
+		CO2_1 = (C & 0xFF00) >> 8;
-		CO2_2 = RS485_RX_BUF_COPY[20];
+		CO2_1 = C & 0x00FF;
 	}
 	sendbuf[13] = CO2_1;
 	sendbuf[14] = CO2_2;
-	if (now_stage < 7 && total[3 + 18 * (now_stage - 1)] < 24 && total[4 + 18 * (now_stage - 1)] < 60 && chour < 24 && cminute < 60)
+	if (now_stage > 0 && now_stage < 7 && total[3 + 18 * (now_stage - 1)] < 24 && total[4 + 18 * (now_stage - 1)] < 60 && chour < 24 && cminute < 60)
 	{
-		sendbuf[15] = now_stage;					   // 当前阶段
+		sendbuf[15] = now_stage;					   // current state
-		sendbuf[16] = total[3 + 18 * (now_stage - 1)]; // 阶段小时
+		sendbuf[16] = total[3 + 18 * (now_stage - 1)]; // stage hour
-		sendbuf[17] = total[4 + 18 * (now_stage - 1)]; // 阶段分钟
+		sendbuf[17] = total[4 + 18 * (now_stage - 1)]; // stage minute
-		sendbuf[18] = chour;						   // 已运行小时数
+		sendbuf[18] = chour;						   // run hour
-		sendbuf[19] = cminute;						   // 已运行分钟数
+		sendbuf[19] = cminute;						   // run minute
 	}
-	sendbuf[20] = hot_clod_flag; // 加热制冷状态
+	// now_stage = 1;
-	sendbuf[21] = humidity_flag; // 加湿干燥状态
+	sendbuf[15] = now_stage;					   // current state
-	sendbuf[22] = ALARM;		 // 报警状态状态
+	sendbuf[16] = total[3 + 18 * (now_stage - 1)]; // stage hour
-
+	sendbuf[17] = total[4 + 18 * (now_stage - 1)]; // stage minute
-	bufcut_Init(sendbuf_crc, sendbuf, 3, 23);
+	sendbuf[18] = chour;						   // run hour
-	GetCRC16(sendbuf_crc, 20, &crc_num1, &crc_num2);
+	sendbuf[19] = cminute;						   // run minute
-	sendbuf[23] = crc_num1;
+	sendbuf[20] = hot_clod_flag; // hot clod state
-	sendbuf[24] = crc_num2;
+	sendbuf[21] = humidity_flag; // humidity state
-	//		for(int i=0;i<20;i++)
+	sendbuf[22] = ALARM;		 // ALARM state
-	//		{
+
-	//			printf("%x ",sendbuf_crc[i]);
+	sendbuf[23] = (int)pid.Kp / 256;			  // Kp 110
-	//		}
+	sendbuf[24] = (int)pid.Kp % 256;			  // Kp 110
-	//
+	sendbuf[25] = ((int)(pid.Ki * 100000)) / 256; // Ti 0.001
-	//		printf("\r\n");
+	sendbuf[26] = ((int)(pid.Ki * 100000)) % 256; // Ti 0.001
-
+	sendbuf[27] = (int)pid.Kd / 256;			  // Td 340
-	//		for(int i=0;i<29;i++)
+	sendbuf[28] = (int)pid.Kd % 256;			  // Td 340
-	//		{
+
-	//			printf("%x ",sendbuf[i]);
+	// num = (((pid.OUT * 350) / pid.pwmcycle) - 1);
-	//		}
+
-
+	int out1 = pid.OUT;
-	// printf("%x\r\n",sendbuf[0]);
+	// speed count
-	for (a = 0; a < 29; a++) // 循环发送数据
+	int speed_count = out1 / 200.0 * (6000 - 1500) + 1500;
+	if (speed_count > 6000)
 	{
-		while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET)
+		speed_count = 6000;
-			;
+	}
-		USART_SendData(USART1, sendbuf[a]);
+	sendbuf[29] = (speed_count) / 256;
-		// if(a==0)printf("%x\r\n",sendbuf[0]);
+	sendbuf[30] = (speed_count) % 256;
+	// sendbuf[29] = ((int)(pid.OUT * 1000)) / 256;
+	// sendbuf[30] = ((int)(pid.OUT * 1000)) % 256;
+
+	// bufcut_Init(sendbuf_crc, sendbuf, 3, 31);
+	// GetCRC16(sendbuf_crc, 28, &crc_num1, &crc_num2);
+
+
+	int tem_offset_10times = (int)(pid.tem_offset * 10);
+
+	if (tem_offset_10times < 0) {
+		tem_offset_10times = (~(tem_offset_10times - 1)) & 0xFFFF;
+	}
+	sendbuf[31] = tem_offset_10times / 256; // tem offset
+	sendbuf[32] = tem_offset_10times % 256;
+
+	sendbuf[33] = ((int)(pid.tem_threshold * 10)) / 256; // tem threshold
+	sendbuf[34] = ((int)(pid.tem_threshold * 10)) % 256;
+
+	GetCRC16(sendbuf, 35, &crc_num1, &crc_num2);
+	sendbuf[35] = crc_num1;
+	sendbuf[36] = crc_num2;
+
+	// u8 tmpabc[] = {0xAA, 0xBB, 0xCC};
+	// RS485_1_Send_Data(tmpabc, 3);
+	// only when modify happen, then send
+	if (cmp_str(prev_sendbuf, sendbuf, 41) != 0) {
+
+		RS485_1_Send_Data(sendbuf, 41);
+
+		cp_str_to_prev(prev_sendbuf, sendbuf, 41);
 	}
 
-	while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET)
-		;
-	// RS485_RX_CNT=0;
-	RS485_1_TX_EN = 0; // 设置为接收模式
 }
 
+/**
+ * sync environment params
+*/
 void RS485_1_Send_Data_3(void)
 {
-	u8 batchbuf[8] = {0xEE, 0xB5, 0x01, 0x00, 0xFF, 0xFC, 0xFF, 0xFF};
+	u8 batchbuf[10] = {0xEE, 0xB5, 0x01, 0x00, 0x00, 0x00, 0xFF, 0xFC, 0xFF, 0xFF};
 	u8 t;
 
-	RS485_1_TX_EN = 1; // 设置为发送模式
+	RS485_1_TX_EN = 1;
 	batchbuf[3] = NUM;
 	NUM += 1;
 	if (NUM > 6)
 		NUM = 1;
-	for (t = 0; t < 8; t++) // 循环发送数据
+	GetCRC16(batchbuf, 4, batchbuf + 4, batchbuf + 5);
+	for (t = 0; t < 10; t++)
 	{
 		while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET)
 			;
@@ -481,16 +532,16 @@ void RS485_1_Send_Data_3(void)
 		;
 	// RS485_RX_CNT=0;
 
-	RS485_1_TX_EN = 0; // 设置为接收模式
+	RS485_1_TX_EN = 0;
 }
-//	void RS485_3_Send_Data_2(void)//上传当前周期(1)，周期时长(2)，已运行时长(2)，红蓝白光(6)，加热制冷状态(1)，加湿除湿状态(1)，报警状态(1)
+//	void RS485_3_Send_Data_2(void)
 //{
 //	delay_ms(50);
-//	u8 sendbuf[21]={0xEE,0xB5,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFC,0xFF,0xFF};//发送给串口屏的实时数据
+//	u8 sendbuf[21]={0xEE,0xB5,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFC,0xFF,0xFF};//???????????????????
 //	u8 a;
 //	GPIO8_Init();
 //	GPIO_SetBits(GPIOB,GPIO_Pin_8);
-//	RS485_3_TX_EN=1;			//设置为发送模式
+//	RS485_3_TX_EN=1;
 //	sendbuf[3]=t;
 //	sendbuf[4]=total[3 + 18 * (t - 1)];
 //	sendbuf[5]=total[4 + 18 * (t - 1)];
@@ -507,7 +558,7 @@ void RS485_1_Send_Data_3(void)
 //	sendbuf[16]=ALARM;
 //
 //
-//  	for(a=0;a<21;a++)		//循环发送数据
+//  	for(a=0;a<21;a++)
 //	{
 //		while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
 //		USART_SendData(USART1,sendbuf[a]);
@@ -516,46 +567,40 @@ void RS485_1_Send_Data_3(void)
 //  while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
 //	RS485_RX_CNT=0;
 //  GPIO_ResetBits(GPIOB,GPIO_Pin_8);
-//	RS485_3_TX_EN=0;				//设置为接收模式
+//	RS485_3_TX_EN=0;
 //}
 
-// RS485发送len个字节.
+void RS485_3_Send_Data(u8 *buf,u8 len)
-// buf:发送区首地址
+{
-// len:发送的字节数(为了和本代码的接收匹配,这里建议不要超过64个字节)
+	u8 t;
-// void RS485_3_Send_Data(u8 *buf,u8 len)
+	// GPIO8_Init();
-//{
+	// GPIO_SetBits(GPIOB,GPIO_Pin_8);
-//	u8 t;
+	RS485_3_TX_EN=1;
-//	GPIO8_Init();
+  	for(t=0;t<len;t++)
-//	GPIO_SetBits(GPIOB,GPIO_Pin_8);
+	{
-//	RS485_3_TX_EN=1;			//设置为发送模式
+		while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
-//   	for(t=0;t<len;t++)		//循环发送数据
+		USART_SendData(USART1,buf[t]);
-//	{
+	}
-//		while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
+
-//		USART_SendData(USART1,buf[t]);
+	while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
-//	}
+	// RS485_RX_CNT=0;
-//
+	//   GPIO_ResetBits(GPIOB,GPIO_Pin_8);
-//	while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
+	RS485_3_TX_EN=0;
-//	RS485_RX_CNT=0;
+}
-//   GPIO_ResetBits(GPIOB,GPIO_Pin_8);
-//	RS485_3_TX_EN=0;				//设置为接收模式
-// }
 
-// RS485查询接收到的数据
-// buf:接收缓存首地址
-// len:读到的数据长度
 void RS485_Receive_Data(u8 *buf, u8 *len)
 {
 	u8 rxlen = RS485_RX_CNT;
 	u8 i = 0;
-	*len = 0;							// 默认为0
+	*len = 0;
-	delay_ms(10);						// 等待10ms,连续超过10ms没有接收到一个数据,则认为接收结束
+	delay_ms(10);
-	if (rxlen == RS485_RX_CNT && rxlen) // 接收到了数据,且接收完成了
+	if (rxlen == RS485_RX_CNT && rxlen)
 	{
 		for (i = 0; i < rxlen; i++)
 		{
 			buf[i] = RS485_RX_BUF[i];
 		}
-		*len = RS485_RX_CNT; // 记录本次数据长度
+		*len = RS485_RX_CNT;
-		RS485_RX_CNT = 0;	 // 清零
+		RS485_RX_CNT = 0;
 	}
 }

HARDWARE/rs485.h

@@ -5,15 +5,14 @@
  								  
 
 
-extern u8 RS485_RX_BUF[128]; 		//接收缓冲,最大64个字节
+extern u8 RS485_RX_BUF[128]; 		//receive buffer, max 128
-extern u8 RS485_RX_CNT;   			//接收到的数据长度
+extern u8 RS485_RX_CNT;   			// received data length
 extern u8 RS485_RX_Flag_Num;
 extern u8 RS485_RX_Flag;
 
-//模式控制
+#define RS485_1_TX_EN		PBout(11)	// 485 mode control. 0:receiving; 1:Send
-#define RS485_1_TX_EN		PBout(11)	//485模式控制.0,接收;1,发送.
+#define RS485_2_TX_EN		PBout(10)	// 485 mode control. 0:receiving; 1:Send
-#define RS485_2_TX_EN		PBout(10)	//485模式控制.0,接收;1,发送.
+#define RS485_3_TX_EN		PBout(4)	// 485 mode control. 0:receiving; 1:Send
-#define RS485_3_TX_EN		PBout(4)	//485模式控制.0,接收;1,发送.
 
 
 void RS485_1_Init(u32 bound);
@@ -24,7 +23,7 @@ void RS485_1_Send_Data_1(u8 *buf,u8 len);
 //void RS485_3_Send_Data_1(void);
 void RS485_1_Send_Data_2(void);
 void RS485_1_Send_Data_3(void);
-//void RS485_3_Send_Data(u8 *buf,u8 len);
+void RS485_3_Send_Data(u8 *buf,u8 len);
 void RS485_Receive_Data(u8 *buf,u8 *len);
 void SN74CB3Q3253_Init(void);
 u8 CRC16_check(u8 *puchMsg, u16 usDataLen); 

HARDWARE/write.c

@@ -5,139 +5,194 @@
 #include "rtc.h"
 #include "SysTick.h"
 #include "myfreertos.h"
-extern u8 RS485_RX_BUF[128];//
+
-//extern u8 buf[51];
+
+// extern u8 buf[51];
+
+extern u8 RS485_RX_BUF[128]; //
 extern u8 store_stage;
-u8 read_stage=1;//从flash读取出来的阶段号
+u8 read_stage = 1; // stage from flash
 extern u8 now_stage;
 extern u8 chour;
 extern u8 cminute;
-u16 current_minute=0;
+extern PID pid;
-u16 total_minute=0;
+u16 current_minute = 0;
+u16 total_minute = 0;
 /*
 六个阶段：每个阶段4个小时
 初始值（十倍存储） ： 温度：25
 					 湿度：70
 										 光照：10
 */
-u8 total[]={0xEE,0XEE,0x01,0x04,0x00,0x00,0xFA,0x02,0xBC,0x00,0x64,0x00,0x64,0x00,0x64,0xFF,0xFF,0xFF,
+u8 total[] = {0xEE, 0XEE, 0x01, 0x04, 0x00, 0x00, 0xFA, 0x02, 0xBC, 0x00, 0x64, 0x00, 0x64, 0x00, 0x64, 0xFF, 0xFF, 0xFF,
-						0xEE,0XEE,0x02,0x04,0x00,0x00,0xFA,0x02,0xBC,0x00,0x64,0x00,0x64,0x00,0x64,0xFF,0xFF,0xFF,
+			  0xEE, 0XEE, 0x02, 0x04, 0x00, 0x00, 0xFA, 0x02, 0xBC, 0x00, 0x64, 0x00, 0x64, 0x00, 0x64, 0xFF, 0xFF, 0xFF,
-						0xEE,0XEE,0x03,0x04,0x00,0x00,0xFA,0x02,0xBC,0x00,0x64,0x00,0x64,0x00,0x64,0xFF,0xFF,0xFF,
+			  0xEE, 0XEE, 0x03, 0x04, 0x00, 0x00, 0xFA, 0x02, 0xBC, 0x00, 0x64, 0x00, 0x64, 0x00, 0x64, 0xFF, 0xFF, 0xFF,
-						0xEE,0XEE,0x04,0x04,0x00,0x00,0xFA,0x02,0xBC,0x00,0x64,0x00,0x64,0x00,0x64,0xFF,0xFF,0xFF,
+			  0xEE, 0XEE, 0x04, 0x04, 0x00, 0x00, 0xFA, 0x02, 0xBC, 0x00, 0x64, 0x00, 0x64, 0x00, 0x64, 0xFF, 0xFF, 0xFF,
-						0xEE,0XEE,0x05,0x04,0x00,0x00,0xFA,0x02,0xBC,0x00,0x64,0x00,0x64,0x00,0x64,0xFF,0xFF,0xFF,
+			  0xEE, 0XEE, 0x05, 0x04, 0x00, 0x00, 0xFA, 0x02, 0xBC, 0x00, 0x64, 0x00, 0x64, 0x00, 0x64, 0xFF, 0xFF, 0xFF,
-						0xEE,0XEE,0x06,0x04,0x00,0x00,0xFA,0x02,0xBC,0x00,0x64,0x00,0x64,0x00,0x64,0xFF,0xFF,0xFF};
+			  0xEE, 0XEE, 0x06, 0x04, 0x00, 0x00, 0xFA, 0x02, 0xBC, 0x00, 0x64, 0x00, 0x64, 0x00, 0x64, 0xFF, 0xFF, 0xFF};
-
-void Array(u8* n,u8 *hour,u8* min,u16* tem,u16* hum,u16* red,u16 *blue,u16* white)
-{
 
-	 *hour=(total[3 + 18 * (*n - 1)]);
-	 *min=(total[4 + 18 * (*n - 1)]);
-	 *tem=(total[5 + 18 * (*n - 1)]<<8|total[6 + 18 * (*n - 1)]);//温度
-	 *hum=(total[7 + 18 * (*n - 1)]<<8|total[8 + 18 * (*n - 1)]);//湿度
-	 *red=(total[9 + 18 * (*n - 1)]<<8|total[10 + 18 * (*n - 1)]);//红光
-	 *blue=(total[11 + 18 * (*n - 1)]<<8|total[12+ 18* (*n - 1)]);//蓝光
-	 *white=(total[13 + 18 * (*n - 1)]<<8|total[14 + 18 * (*n - 1)]);//白光
 
+void Array(u8 *n, u8 *hour, u8 *min, u16 *tem, u16 *hum, u16 *red, u16 *blue, u16 *white)
+{
+	*hour = (total[3 + 18 * (*n - 1)]);
+	*min = (total[4 + 18 * (*n - 1)]);
+	*tem = (total[5 + 18 * (*n - 1)] << 8 | total[6 + 18 * (*n - 1)]);	   // 温度
+	*hum = (total[7 + 18 * (*n - 1)] << 8 | total[8 + 18 * (*n - 1)]);	   // 湿度
+	*red = (total[9 + 18 * (*n - 1)] << 8 | total[10 + 18 * (*n - 1)]);	   // 红光
+	*blue = (total[11 + 18 * (*n - 1)] << 8 | total[12 + 18 * (*n - 1)]);  // 蓝光
+	*white = (total[13 + 18 * (*n - 1)] << 8 | total[14 + 18 * (*n - 1)]); // 白光
 }
 
-
 uint8_t ArrayRead[108];
 uint8_t ArrayWrite[108];
 
-
+uint8_t pidsRead[10];
+uint8_t pidsWrite[10];
 
 void Write_Init(void)
 {
 
 	W25QXX_Init();
 	W25QXX_Erase_Sector(0x000000);
-	delay_ms(150);
+
-	W25QXX_Write_NoCheck(total,0x000000,108);//把数据写入flash
+	
-	W25QXX_Write_NoCheck(&store_stage,0x00006D,1);//把当前运行阶段写入flash
+	W25QXX_Write(total, 0x000000, 108);		 // write data to flash
-	W25QXX_Read(ArrayRead,0x000000,108);//把数据读出来
+	if (store_stage <= 0 || store_stage > 6) {
+		store_stage = 1;
+	}
+	W25QXX_Write(&store_stage, 0x001000, 1); // write current stage to flash
+
+	pidsWrite[0] = (int)pid.Kp / 256;			  // Kp 110
+	pidsWrite[1] = (int)(pid.Kp) % 256;			  // Kp 110
+	pidsWrite[2] = ((int)(pid.Ki * 100000)) / 256; // Ti 0.001
+	pidsWrite[3] = ((int)(pid.Ki * 100000)) % 256; // Ti 0.001
+	pidsWrite[4] = (int)pid.Kd / 256;			  // Td 340
+	pidsWrite[5] = (int)pid.Kd % 256;			  // Td 340
+
+	int tem_offset_10times = (int)(pid.tem_offset * 10);
+
+	if (tem_offset_10times < 0) {
+		tem_offset_10times = (~(tem_offset_10times - 1)) & 0xFFFF;
+	}
+	pidsWrite[6] = tem_offset_10times / 256;
+	pidsWrite[7] = tem_offset_10times % 256;
+
+	pidsWrite[8] = ((int)(pid.tem_threshold * 10)) / 256;
+	pidsWrite[9] = ((int)(pid.tem_threshold * 10)) % 256;
+
+
+	// // wtite p i d
+	W25QXX_Write(pidsWrite, 0x002000, 10); // p i d tem_offset tem_threshold, 2bytes for each
+
+	W25QXX_Read(ArrayRead, 0x000000, 108);
+
 
 }
 void Read_Init(void)
 {
 	W25QXX_Init();
-  W25QXX_Read(ArrayRead,0x000000,108);//把数据读出来
+	W25QXX_Read(ArrayRead, 0x000000, 108);
-	bufcut_Init(total,ArrayRead,0,109);//把读出来的数据赋值给total数组
+	bufcut_Init(total, ArrayRead, 0, 108);
-	W25QXX_Read(&read_stage,0x00006D,1);
+	W25QXX_Read(&read_stage, 0x001000, 1);
-	now_stage=read_stage;//读出来的阶段赋值给当前阶段
+	now_stage = read_stage;
-	//printf("%d\r\n",now_stage);
+	// if (now_stage <= 0 || now_stage > 6) {
-	//printf("\r\n");
+	// 	now_stage = 3;
-	//printf("\r\n");
+	// }
-//	for(int i=0;i<108;i++)
+	// now_stage = 3;
-//	 {
+
-//		printf("%d ",ArrayRead[i]);
+	// read p i d
-//	 }
+	W25QXX_Read(pidsRead, 0x002000, 8); // p i d tem_offset tem_threshold, 2bytes for each
-
+	float Kp = pidsRead[0] * 256.0 + pidsRead[1];
+	float Ki = (pidsRead[2] * 256.0 + pidsRead[3]) / 100000.0;
+	float Kd = pidsRead[4] * 256.0 + pidsRead[5];
+	int tem_offset_10times = pidsRead[6] * 256.0 + pidsRead[7];
+	// Negative tem offset treatment
+	if (tem_offset_10times & 0x8000)
+	{
+		tem_offset_10times = ((~tem_offset_10times + 1) & 0xFFFF);
+	}
+	float tem_offset = tem_offset_10times / 10.0;
+	
+	float tem_threshold = (pidsRead[8] * 256.0 + pidsRead[9]) / 10.0;
+
+	// pid.Kp = 120;
+	if (Kp > 1e-3) { pid.Kp = Kp; }
+	if (Ki > 1e-3) { pid.Ki = Ki; }
+	if (Kd > 1e-3) { pid.Kd = Kd; }
+	pid.tem_offset = tem_offset;
+	if (tem_threshold > 1e-3) { pid.tem_threshold = tem_threshold; }
+	// pid.Ki = 0.002;
+	// pid.Kd = 300;
+	// pid.Kp = pidsRead[0] * 256.0 + pidsRead[1];
+	// pid.Ki = (pidsRead[2] * 256.0 + pidsRead[3]) / 100000.0;
+	// pid.Kd = pidsRead[4] * 256.0 + pidsRead[5];
+
+
+	// printf("%d\r\n",now_stage);
+	// printf("\r\n");
+	// printf("\r\n");
+	//	for(int i=0;i<108;i++)
+	//	 {
+	//		printf("%d ",ArrayRead[i]);
+	//	 }
 }
 
-
+void Analysis(u8 *n, u16 *i, u8 *rs485_rx_buf)
-void  Analysis(u8* n,u16 *i,u8*rs485_rx_buf)//(阶段号，数组值序号,)解析函数
 {
-	*n=rs485_rx_buf[3];
+	*n = rs485_rx_buf[3];
-	*i=rs485_rx_buf[4];
+	*i = rs485_rx_buf[4];
 
-	if(*i==2)
+	if (*i == 2)
 	{
-		total[3 + 18 * (*n - 1)]=rs485_rx_buf[5];//时
+		total[3 + 18 * (*n - 1)] = rs485_rx_buf[5]; // 时
 	}
-	if(*i==3)
+	if (*i == 3)
 	{
-		total[4 + 18 * (*n - 1)]=rs485_rx_buf[5];//分
+		total[4 + 18 * (*n - 1)] = rs485_rx_buf[5]; // 分
 	}
-	if (*i>=4 && *i<=8) // 温湿度红蓝白光
+	if (*i >= 4 && *i <= 8) // 温湿度红蓝白光
 	{
-		total[(2 * (*i) - 3) + 18 * (*n - 1)]=rs485_rx_buf[5];
+		total[(2 * (*i) - 3) + 18 * (*n - 1)] = rs485_rx_buf[5];
-		total[(2 * (*i) - 2) + 18 * (*n - 1)]=rs485_rx_buf[6];
+		total[(2 * (*i) - 2) + 18 * (*n - 1)] = rs485_rx_buf[6];
 	}
-
-	
 }
 
-void Batch_synchronization(u8 *n,u8*rs485_rx_buf)//批量同步
+void Batch_synchronization(u8 *n, u8 *rs485_rx_buf) // batch sync
 {
 
-	*n=rs485_rx_buf[3];
+	*n = rs485_rx_buf[3];
-	u8 i=4;	
+	u8 i = 4;
-	for( i=4;i<16;i++)
+	for (i = 4; i < 16; i++)
 	{
-			total[(i-1)+ 18 * (*n - 1)]=rs485_rx_buf[i];
+		total[(i - 1) + 18 * (*n - 1)] = rs485_rx_buf[i];
-		  
 	}
-		 
 }
 
-
-
 u8 timelong_Compare()
 {
-	RTC_Get(&chour,&cminute);//获得当前小时与分钟
+	RTC_Get(&chour, &cminute); // 获得当前小时与分钟
 	current_minute = chour * 60 + cminute;
 	total_minute = total[18 * now_stage - 15] * 60 + total[18 * now_stage - 14];
 
 	if (current_minute >= total_minute)
 	{
-		RTC_synchronization_ins(2023,9,1,0,00,00);
+		RTC_synchronization_ins(2023, 9, 1, 0, 00, 00);
 		if (now_stage == 6)
 		{
-			store_stage=1;
+			store_stage = 1;
 			Write_Init();
 			return 1;
 		}
-		store_stage=now_stage + 1;
+		store_stage = now_stage + 1;
 		Write_Init();
 		return now_stage + 1;
 	}
-	store_stage=now_stage;
+	store_stage = now_stage;
 	return now_stage;
-	
 }
 
 int isAllZeros(u8 arr[], int size)
-	{
+{
 	for (int i = 0; i < size; i++)
 	{
 		if (arr[i] != 0)
@@ -147,4 +202,3 @@ int isAllZeros(u8 arr[], int size)
 	}
 	return 1; // 返回1表示全为0
 }
-

OBJ/ExtDll.iex

@@ -1,2 +0,0 @@
-[EXTDLL]
-Count=0

OBJ/LED.build_log.htm

@@ -1,44 +0,0 @@
-<html>
-<body>
-<pre>
-<h1>礦ision Build Log</h1>
-<h2>Tool Versions:</h2>
-IDE-Version: μVision V5.23.0.0
-Copyright (C) 2017 ARM Ltd and ARM Germany GmbH. All rights reserved.
-License Information: 123 Administrator, 123, LIC=8MZI6-DR3S6-E0NN4-FWZV3-E3BTD-26MKT
- 
-Tool Versions:
-Toolchain:       MDK-ARM Professional  Version: 5.23
-Toolchain Path:  D:\Keil_v5\ARM\ARMCC\Bin
-C Compiler:      Armcc.exe V5.06 update 4 (build 422)
-Assembler:       Armasm.exe V5.06 update 4 (build 422)
-Linker/Locator:  ArmLink.exe V5.06 update 4 (build 422)
-Library Manager: ArmAr.exe V5.06 update 4 (build 422)
-Hex Converter:   FromElf.exe V5.06 update 4 (build 422)
-CPU DLL:         SARMCM3.DLL V5.23
-Dialog DLL:      DCM.DLL V1.15.0.0
-Target DLL:      STLink\ST-LINKIII-KEIL_SWO.dll V2.0.18.0
-Dialog DLL:      TCM.DLL V1.27.0.0
- 
-<h2>Project:</h2>
-E:\智能农业 智能环境气候箱\智能气候培养箱\主控板\代码\control_freertos\USER\control.uvprojx
-Project File Date:  01/08/2024
-
-<h2>Output:</h2>
-*** Using Compiler 'V5.06 update 4 (build 422)', folder: 'D:\Keil_v5\ARM\ARMCC\Bin'
-Build target 'LED'
-compiling myfreertos.c...
-linking...
-Program Size: Code=25408 RO-data=804 RW-data=1524 ZI-data=13220  
-FromELF: creating hex file...
-"..\OBJ\LED.axf" - 0 Error(s), 0 Warning(s).
-
-<h2>Collection of Component include folders:</h2>
-  .\RTE\_LED
-  D:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include
-
-<h2>Collection of Component Files used:</h2>
-Build Time Elapsed:  00:00:04
-</pre>
-</body>
-</html>

OBJ/LED.lnp

@@ -1,77 +0,0 @@
---cpu Cortex-M3
-"..\obj\main.o"
-"..\obj\stm32f10x_it.o"
-"..\obj\system_stm32f10x.o"
-"..\obj\pwm.o"
-"..\obj\myspi.o"
-"..\obj\w25q128.o"
-"..\obj\relays.o"
-"..\obj\write.o"
-"..\obj\osc.o"
-"..\obj\rs485.o"
-"..\obj\rtc.o"
-"..\obj\bufcut.o"
-"..\obj\iwdg.o"
-"..\obj\pid.o"
-"..\obj\pwmout.o"
-"..\obj\system.o"
-"..\obj\systick.o"
-"..\obj\usart.o"
-"..\obj\core_cm3.o"
-"..\obj\startup_stm32f10x_md.o"
-"..\obj\misc.o"
-"..\obj\stm32f10x_gpio.o"
-"..\obj\stm32f10x_dbgmcu.o"
-"..\obj\stm32f10x_rcc.o"
-"..\obj\stm32f10x_usart.o"
-"..\obj\stm32f10x_adc.o"
-"..\obj\stm32f10x_bkp.o"
-"..\obj\stm32f10x_can.o"
-"..\obj\stm32f10x_cec.o"
-"..\obj\stm32f10x_crc.o"
-"..\obj\stm32f10x_dac.o"
-"..\obj\stm32f10x_dma.o"
-"..\obj\stm32f10x_exti.o"
-"..\obj\stm32f10x_flash.o"
-"..\obj\stm32f10x_fsmc.o"
-"..\obj\stm32f10x_i2c.o"
-"..\obj\stm32f10x_iwdg.o"
-"..\obj\stm32f10x_pwr.o"
-"..\obj\stm32f10x_rtc.o"
-"..\obj\stm32f10x_sdio.o"
-"..\obj\stm32f10x_spi.o"
-"..\obj\stm32f10x_tim.o"
-"..\obj\stm32f10x_wwdg.o"
-"..\obj\socket.o"
-"..\obj\spi.o"
-"..\obj\utility.o"
-"..\obj\w5500.o"
-"..\obj\w5500api.o"
-"..\obj\dns.o"
-"..\obj\dhcp.o"
-"..\obj\cjson.o"
-"..\obj\mqttconnectclient.o"
-"..\obj\mqttconnectserver.o"
-"..\obj\mqttdeserializepublish.o"
-"..\obj\mqttformat.o"
-"..\obj\mqttpacket.o"
-"..\obj\mqttserializepublish.o"
-"..\obj\mqttsubscribeclient.o"
-"..\obj\mqttsubscribeserver.o"
-"..\obj\mqttunsubscribeclient.o"
-"..\obj\mqttunsubscribeserver.o"
-"..\obj\mqtt_api.o"
-"..\obj\md5.o"
-"..\obj\croutine.o"
-"..\obj\event_groups.o"
-"..\obj\list.o"
-"..\obj\tasks.o"
-"..\obj\timers.o"
-"..\obj\queue.o"
-"..\obj\port.o"
-"..\obj\heap_4.o"
-"..\obj\myfreertos.o"
---library_type=microlib --strict --scatter "..\OBJ\LED.sct"
---summary_stderr --info summarysizes --map --xref --callgraph --symbols
---info sizes --info totals --info unused --info veneers
---list ".\Listings\LED.map" -o ..\OBJ\LED.axf

OBJ/LED.sct

@@ -1,15 +0,0 @@
-; *************************************************************
-; *** Scatter-Loading Description File generated by uVision ***
-; *************************************************************
-
-LR_IROM1 0x08000000 0x00010000  {    ; load region size_region
-  ER_IROM1 0x08000000 0x00010000  {  ; load address = execution address
-   *.o (RESET, +First)
-   *(InRoot$$Sections)
-   .ANY (+RO)
-  }
-  RW_IRAM1 0x20000000 0x00005000  {  ; RW data
-   .ANY (+RW +ZI)
-  }
-}
-

OBJ/LED_sct.Bak

@@ -1,16 +0,0 @@
-; *************************************************************
-; *** Scatter-Loading Description File generated by uVision ***
-; *************************************************************
-
-LR_IROM1 0x08000000 0x00010000  {    ; load region size_region
-  ER_IROM1 0x08000000 0x00010000  {  ; load address = execution address
-   *.o (RESET, +First)
-   *(InRoot$$Sections)
-   .ANY (+RO)
-   .ANY (+XO)
-  }
-  RW_IRAM1 0x20000000 0x00005000  {  ; RW data
-   .ANY (+RW +ZI)
-  }
-}
-

OBJ/bufcut.d

@@ -1,32 +0,0 @@
-..\obj\bufcut.o: ..\HARDWARE\bufcut.c
-..\obj\bufcut.o: ..\USER\stm32f10x.h
-..\obj\bufcut.o: ..\CORE\core_cm3.h
-..\obj\bufcut.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\bufcut.o: ..\USER\system_stm32f10x.h
-..\obj\bufcut.o: ..\USER\stm32f10x_conf.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\bufcut.o: ..\USER\stm32f10x.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\bufcut.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\bufcut.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\bufcut.o: ..\HARDWARE\rs485.h

OBJ/cjson.d

@@ -1,9 +0,0 @@
-..\obj\cjson.o: ..\MQTT\lib\cJSON.c
-..\obj\cjson.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
-..\obj\cjson.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\cjson.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\math.h
-..\obj\cjson.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
-..\obj\cjson.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\float.h
-..\obj\cjson.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h
-..\obj\cjson.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\ctype.h
-..\obj\cjson.o: ..\MQTT\lib\cJSON.h

OBJ/core_cm3.d

@@ -1,2 +0,0 @@
-..\obj\core_cm3.o: ..\CORE\core_cm3.c
-..\obj\core_cm3.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h

OBJ/croutine.d

@@ -1,45 +0,0 @@
-..\obj\croutine.o: ..\FreeRTOS\croutine.c
-..\obj\croutine.o: ..\FreeRTOS\include\FreeRTOS.h
-..\obj\croutine.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
-..\obj\croutine.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\croutine.o: ..\FreeRTOS\include\FreeRTOSConfig.h
-..\obj\croutine.o: ..\SYSTEM\system.h
-..\obj\croutine.o: ..\USER\stm32f10x.h
-..\obj\croutine.o: ..\CORE\core_cm3.h
-..\obj\croutine.o: ..\USER\system_stm32f10x.h
-..\obj\croutine.o: ..\USER\stm32f10x_conf.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\croutine.o: ..\USER\stm32f10x.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\croutine.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\croutine.o: ..\SYSTEM\usart.h
-..\obj\croutine.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\croutine.o: ..\FreeRTOS\include\projdefs.h
-..\obj\croutine.o: ..\FreeRTOS\include\portable.h
-..\obj\croutine.o: ..\FreeRTOS\include\deprecated_definitions.h
-..\obj\croutine.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
-..\obj\croutine.o: ..\FreeRTOS\include\mpu_wrappers.h
-..\obj\croutine.o: ..\FreeRTOS\include\task.h
-..\obj\croutine.o: ..\FreeRTOS\include\list.h
-..\obj\croutine.o: ..\FreeRTOS\include\croutine.h
-..\obj\croutine.o: ..\FreeRTOS\include\list.h

OBJ/dhcp.d

@@ -1,42 +0,0 @@
-..\obj\dhcp.o: ..\dhcp\dhcp.c
-..\obj\dhcp.o: ..\dhcp\dhcp.h
-..\obj\dhcp.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\dhcp.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
-..\obj\dhcp.o: ..\w5500\w5500api.h
-..\obj\dhcp.o: ..\SYSTEM\SysTick.h
-..\obj\dhcp.o: ..\SYSTEM\system.h
-..\obj\dhcp.o: ..\USER\stm32f10x.h
-..\obj\dhcp.o: ..\CORE\core_cm3.h
-..\obj\dhcp.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\dhcp.o: ..\USER\system_stm32f10x.h
-..\obj\dhcp.o: ..\USER\stm32f10x_conf.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\dhcp.o: ..\USER\stm32f10x.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\dhcp.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\dhcp.o: ..\w5500\spi.h
-..\obj\dhcp.o: ..\w5500\w5500.h
-..\obj\dhcp.o: ..\w5500\Types.h
-..\obj\dhcp.o: ..\w5500\socket.h
-..\obj\dhcp.o: ..\w5500\utility.h
-..\obj\dhcp.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h

OBJ/dns.d

@@ -1,43 +0,0 @@
-..\obj\dns.o: ..\dns\dns.c
-..\obj\dns.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\dns.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
-..\obj\dns.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
-..\obj\dns.o: ..\USER\stm32f10x.h
-..\obj\dns.o: ..\CORE\core_cm3.h
-..\obj\dns.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\dns.o: ..\USER\system_stm32f10x.h
-..\obj\dns.o: ..\USER\stm32f10x_conf.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\dns.o: ..\USER\stm32f10x.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\dns.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\dns.o: ..\dns\dns.h
-..\obj\dns.o: ..\w5500\w5500api.h
-..\obj\dns.o: ..\SYSTEM\SysTick.h
-..\obj\dns.o: ..\SYSTEM\system.h
-..\obj\dns.o: ..\w5500\spi.h
-..\obj\dns.o: ..\w5500\w5500.h
-..\obj\dns.o: ..\w5500\Types.h
-..\obj\dns.o: ..\w5500\socket.h
-..\obj\dns.o: ..\w5500\utility.h
-..\obj\dns.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h

OBJ/event_groups.d

@@ -1,46 +0,0 @@
-..\obj\event_groups.o: ..\FreeRTOS\event_groups.c
-..\obj\event_groups.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
-..\obj\event_groups.o: ..\FreeRTOS\include\FreeRTOS.h
-..\obj\event_groups.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
-..\obj\event_groups.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\event_groups.o: ..\FreeRTOS\include\FreeRTOSConfig.h
-..\obj\event_groups.o: ..\SYSTEM\system.h
-..\obj\event_groups.o: ..\USER\stm32f10x.h
-..\obj\event_groups.o: ..\CORE\core_cm3.h
-..\obj\event_groups.o: ..\USER\system_stm32f10x.h
-..\obj\event_groups.o: ..\USER\stm32f10x_conf.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\event_groups.o: ..\USER\stm32f10x.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\event_groups.o: ..\SYSTEM\usart.h
-..\obj\event_groups.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\event_groups.o: ..\FreeRTOS\include\projdefs.h
-..\obj\event_groups.o: ..\FreeRTOS\include\portable.h
-..\obj\event_groups.o: ..\FreeRTOS\include\deprecated_definitions.h
-..\obj\event_groups.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
-..\obj\event_groups.o: ..\FreeRTOS\include\mpu_wrappers.h
-..\obj\event_groups.o: ..\FreeRTOS\include\task.h
-..\obj\event_groups.o: ..\FreeRTOS\include\list.h
-..\obj\event_groups.o: ..\FreeRTOS\include\timers.h
-..\obj\event_groups.o: ..\FreeRTOS\include\event_groups.h

OBJ/heap_4.d

@@ -1,44 +0,0 @@
-..\obj\heap_4.o: ..\FreeRTOS\portable\MemMang\heap_4.c
-..\obj\heap_4.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
-..\obj\heap_4.o: ..\FreeRTOS\include\FreeRTOS.h
-..\obj\heap_4.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
-..\obj\heap_4.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\heap_4.o: ..\FreeRTOS\include\FreeRTOSConfig.h
-..\obj\heap_4.o: ..\SYSTEM\system.h
-..\obj\heap_4.o: ..\USER\stm32f10x.h
-..\obj\heap_4.o: ..\CORE\core_cm3.h
-..\obj\heap_4.o: ..\USER\system_stm32f10x.h
-..\obj\heap_4.o: ..\USER\stm32f10x_conf.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\heap_4.o: ..\USER\stm32f10x.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\heap_4.o: ..\SYSTEM\usart.h
-..\obj\heap_4.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\heap_4.o: ..\FreeRTOS\include\projdefs.h
-..\obj\heap_4.o: ..\FreeRTOS\include\portable.h
-..\obj\heap_4.o: ..\FreeRTOS\include\deprecated_definitions.h
-..\obj\heap_4.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
-..\obj\heap_4.o: ..\FreeRTOS\include\mpu_wrappers.h
-..\obj\heap_4.o: ..\FreeRTOS\include\task.h
-..\obj\heap_4.o: ..\FreeRTOS\include\list.h

OBJ/iwdg.d

@@ -1,32 +0,0 @@
-..\obj\iwdg.o: ..\HARDWARE\iwdg.c
-..\obj\iwdg.o: ..\HARDWARE\iwdg.h
-..\obj\iwdg.o: ..\SYSTEM\system.h
-..\obj\iwdg.o: ..\USER\stm32f10x.h
-..\obj\iwdg.o: ..\CORE\core_cm3.h
-..\obj\iwdg.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\iwdg.o: ..\USER\system_stm32f10x.h
-..\obj\iwdg.o: ..\USER\stm32f10x_conf.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\iwdg.o: ..\USER\stm32f10x.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\iwdg.o: ..\STM32F10x_FWLib\inc\misc.h

OBJ/list.d

@@ -1,43 +0,0 @@
-..\obj\list.o: ..\FreeRTOS\list.c
-..\obj\list.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
-..\obj\list.o: ..\FreeRTOS\include\FreeRTOS.h
-..\obj\list.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
-..\obj\list.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\list.o: ..\FreeRTOS\include\FreeRTOSConfig.h
-..\obj\list.o: ..\SYSTEM\system.h
-..\obj\list.o: ..\USER\stm32f10x.h
-..\obj\list.o: ..\CORE\core_cm3.h
-..\obj\list.o: ..\USER\system_stm32f10x.h
-..\obj\list.o: ..\USER\stm32f10x_conf.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\list.o: ..\USER\stm32f10x.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\list.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\list.o: ..\SYSTEM\usart.h
-..\obj\list.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\list.o: ..\FreeRTOS\include\projdefs.h
-..\obj\list.o: ..\FreeRTOS\include\portable.h
-..\obj\list.o: ..\FreeRTOS\include\deprecated_definitions.h
-..\obj\list.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
-..\obj\list.o: ..\FreeRTOS\include\mpu_wrappers.h
-..\obj\list.o: ..\FreeRTOS\include\list.h

OBJ/main.d

@@ -1,65 +0,0 @@
-..\obj\main.o: main.c
-..\obj\main.o: ..\myfreertos\myfreertos.h
-..\obj\main.o: ..\FreeRTOS\include\FreeRTOS.h
-..\obj\main.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
-..\obj\main.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\main.o: ..\FreeRTOS\include\FreeRTOSConfig.h
-..\obj\main.o: ..\SYSTEM\system.h
-..\obj\main.o: ..\USER\stm32f10x.h
-..\obj\main.o: ..\CORE\core_cm3.h
-..\obj\main.o: ..\USER\system_stm32f10x.h
-..\obj\main.o: ..\USER\stm32f10x_conf.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\main.o: ..\USER\stm32f10x.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\main.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\main.o: ..\SYSTEM\usart.h
-..\obj\main.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\main.o: ..\FreeRTOS\include\projdefs.h
-..\obj\main.o: ..\FreeRTOS\include\portable.h
-..\obj\main.o: ..\FreeRTOS\include\deprecated_definitions.h
-..\obj\main.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
-..\obj\main.o: ..\FreeRTOS\include\mpu_wrappers.h
-..\obj\main.o: ..\FreeRTOS\include\task.h
-..\obj\main.o: ..\FreeRTOS\include\list.h
-..\obj\main.o: ..\SYSTEM\SysTick.h
-..\obj\main.o: ..\HARDWARE\W25Q128_Ins.h
-..\obj\main.o: ..\HARDWARE\rs485.h
-..\obj\main.o: ..\HARDWARE\write.h
-..\obj\main.o: ..\HARDWARE\Relays.h
-..\obj\main.o: ..\HARDWARE\OSC.h
-..\obj\main.o: ..\HARDWARE\PWM.h
-..\obj\main.o: ..\HARDWARE\rtc.h
-..\obj\main.o: ..\HARDWARE\bufcut.h
-..\obj\main.o: ..\HARDWARE\iwdg.h
-..\obj\main.o: ..\HARDWARE\PID.h
-..\obj\main.o: ..\HARDWARE\PWMOUT.h
-..\obj\main.o: ..\w5500\w5500api.h
-..\obj\main.o: ..\w5500\spi.h
-..\obj\main.o: ..\w5500\w5500.h
-..\obj\main.o: ..\w5500\Types.h
-..\obj\main.o: ..\w5500\socket.h
-..\obj\main.o: ..\dhcp\dhcp.h
-..\obj\main.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
-..\obj\main.o: ..\dns\dns.h
-..\obj\main.o: ..\MQTT\mqtt_api.h

OBJ/md5.d

@@ -1,33 +0,0 @@
-..\obj\md5.o: ..\md5\md5.c
-..\obj\md5.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
-..\obj\md5.o: ..\w5500\types.h
-..\obj\md5.o: ..\md5\md5.h
-..\obj\md5.o: ..\USER\stm32f10x.h
-..\obj\md5.o: ..\CORE\core_cm3.h
-..\obj\md5.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\md5.o: ..\USER\system_stm32f10x.h
-..\obj\md5.o: ..\USER\stm32f10x_conf.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\md5.o: ..\USER\stm32f10x.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\md5.o: ..\STM32F10x_FWLib\inc\misc.h

OBJ/misc.d

@@ -1,31 +0,0 @@
-..\obj\misc.o: ..\STM32F10x_FWLib\src\misc.c
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\misc.o: ..\USER\stm32f10x.h
-..\obj\misc.o: ..\CORE\core_cm3.h
-..\obj\misc.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\misc.o: ..\USER\system_stm32f10x.h
-..\obj\misc.o: ..\USER\stm32f10x_conf.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\misc.o: ..\USER\stm32f10x.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\misc.o: ..\STM32F10x_FWLib\inc\misc.h

OBJ/mqtt_api.d

@@ -1,49 +0,0 @@
-..\obj\mqtt_api.o: ..\MQTT\mqtt_api.c
-..\obj\mqtt_api.o: ..\MQTT\mqtt_api.h
-..\obj\mqtt_api.o: ..\w5500\w5500api.h
-..\obj\mqtt_api.o: ..\SYSTEM\SysTick.h
-..\obj\mqtt_api.o: ..\SYSTEM\system.h
-..\obj\mqtt_api.o: ..\USER\stm32f10x.h
-..\obj\mqtt_api.o: ..\CORE\core_cm3.h
-..\obj\mqtt_api.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqtt_api.o: ..\USER\system_stm32f10x.h
-..\obj\mqtt_api.o: ..\USER\stm32f10x_conf.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqtt_api.o: ..\USER\stm32f10x.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqtt_api.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqtt_api.o: ..\w5500\spi.h
-..\obj\mqtt_api.o: ..\w5500\w5500.h
-..\obj\mqtt_api.o: ..\w5500\Types.h
-..\obj\mqtt_api.o: ..\w5500\socket.h
-..\obj\mqtt_api.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqtt_api.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqtt_api.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqtt_api.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqtt_api.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqtt_api.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqtt_api.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqtt_api.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqtt_api.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqtt_api.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
-..\obj\mqtt_api.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttconnectclient.d

@@ -1,44 +0,0 @@
-..\obj\mqttconnectclient.o: ..\MQTT\lib\MQTTConnectClient.c
-..\obj\mqttconnectclient.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttconnectclient.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttconnectclient.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttconnectclient.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttconnectclient.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttconnectclient.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttconnectclient.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttconnectclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttconnectclient.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttconnectclient.o: ..\w5500\socket.h
-..\obj\mqttconnectclient.o: ..\USER\stm32f10x.h
-..\obj\mqttconnectclient.o: ..\CORE\core_cm3.h
-..\obj\mqttconnectclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttconnectclient.o: ..\USER\system_stm32f10x.h
-..\obj\mqttconnectclient.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttconnectclient.o: ..\USER\stm32f10x.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttconnectclient.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttconnectclient.o: ..\w5500\w5500.h
-..\obj\mqttconnectclient.o: ..\w5500\spi.h
-..\obj\mqttconnectclient.o: ..\w5500\Types.h
-..\obj\mqttconnectclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttconnectserver.d

@@ -1,44 +0,0 @@
-..\obj\mqttconnectserver.o: ..\MQTT\lib\MQTTConnectServer.c
-..\obj\mqttconnectserver.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttconnectserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttconnectserver.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttconnectserver.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttconnectserver.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttconnectserver.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttconnectserver.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttconnectserver.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttconnectserver.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttconnectserver.o: ..\w5500\socket.h
-..\obj\mqttconnectserver.o: ..\USER\stm32f10x.h
-..\obj\mqttconnectserver.o: ..\CORE\core_cm3.h
-..\obj\mqttconnectserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttconnectserver.o: ..\USER\system_stm32f10x.h
-..\obj\mqttconnectserver.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttconnectserver.o: ..\USER\stm32f10x.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttconnectserver.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttconnectserver.o: ..\w5500\w5500.h
-..\obj\mqttconnectserver.o: ..\w5500\spi.h
-..\obj\mqttconnectserver.o: ..\w5500\Types.h
-..\obj\mqttconnectserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttdeserializepublish.d

@@ -1,44 +0,0 @@
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\MQTTDeserializePublish.c
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttdeserializepublish.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttdeserializepublish.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttdeserializepublish.o: ..\w5500\socket.h
-..\obj\mqttdeserializepublish.o: ..\USER\stm32f10x.h
-..\obj\mqttdeserializepublish.o: ..\CORE\core_cm3.h
-..\obj\mqttdeserializepublish.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttdeserializepublish.o: ..\USER\system_stm32f10x.h
-..\obj\mqttdeserializepublish.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttdeserializepublish.o: ..\USER\stm32f10x.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttdeserializepublish.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttdeserializepublish.o: ..\w5500\w5500.h
-..\obj\mqttdeserializepublish.o: ..\w5500\spi.h
-..\obj\mqttdeserializepublish.o: ..\w5500\Types.h
-..\obj\mqttdeserializepublish.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttformat.d

@@ -1,44 +0,0 @@
-..\obj\mqttformat.o: ..\MQTT\lib\MQTTFormat.c
-..\obj\mqttformat.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttformat.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttformat.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttformat.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttformat.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttformat.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttformat.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttformat.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttformat.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttformat.o: ..\w5500\socket.h
-..\obj\mqttformat.o: ..\USER\stm32f10x.h
-..\obj\mqttformat.o: ..\CORE\core_cm3.h
-..\obj\mqttformat.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttformat.o: ..\USER\system_stm32f10x.h
-..\obj\mqttformat.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttformat.o: ..\USER\stm32f10x.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttformat.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttformat.o: ..\w5500\w5500.h
-..\obj\mqttformat.o: ..\w5500\spi.h
-..\obj\mqttformat.o: ..\w5500\Types.h
-..\obj\mqttformat.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttpacket.d

@@ -1,44 +0,0 @@
-..\obj\mqttpacket.o: ..\MQTT\lib\MQTTPacket.c
-..\obj\mqttpacket.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttpacket.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttpacket.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttpacket.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttpacket.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttpacket.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttpacket.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttpacket.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttpacket.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttpacket.o: ..\w5500\socket.h
-..\obj\mqttpacket.o: ..\USER\stm32f10x.h
-..\obj\mqttpacket.o: ..\CORE\core_cm3.h
-..\obj\mqttpacket.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttpacket.o: ..\USER\system_stm32f10x.h
-..\obj\mqttpacket.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttpacket.o: ..\USER\stm32f10x.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttpacket.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttpacket.o: ..\w5500\w5500.h
-..\obj\mqttpacket.o: ..\w5500\spi.h
-..\obj\mqttpacket.o: ..\w5500\Types.h
-..\obj\mqttpacket.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttserializepublish.d

@@ -1,44 +0,0 @@
-..\obj\mqttserializepublish.o: ..\MQTT\lib\MQTTSerializePublish.c
-..\obj\mqttserializepublish.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttserializepublish.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttserializepublish.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttserializepublish.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttserializepublish.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttserializepublish.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttserializepublish.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttserializepublish.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttserializepublish.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttserializepublish.o: ..\w5500\socket.h
-..\obj\mqttserializepublish.o: ..\USER\stm32f10x.h
-..\obj\mqttserializepublish.o: ..\CORE\core_cm3.h
-..\obj\mqttserializepublish.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttserializepublish.o: ..\USER\system_stm32f10x.h
-..\obj\mqttserializepublish.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttserializepublish.o: ..\USER\stm32f10x.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttserializepublish.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttserializepublish.o: ..\w5500\w5500.h
-..\obj\mqttserializepublish.o: ..\w5500\spi.h
-..\obj\mqttserializepublish.o: ..\w5500\Types.h
-..\obj\mqttserializepublish.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttsubscribeclient.d

@@ -1,44 +0,0 @@
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\MQTTSubscribeClient.c
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttsubscribeclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttsubscribeclient.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttsubscribeclient.o: ..\w5500\socket.h
-..\obj\mqttsubscribeclient.o: ..\USER\stm32f10x.h
-..\obj\mqttsubscribeclient.o: ..\CORE\core_cm3.h
-..\obj\mqttsubscribeclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttsubscribeclient.o: ..\USER\system_stm32f10x.h
-..\obj\mqttsubscribeclient.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttsubscribeclient.o: ..\USER\stm32f10x.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttsubscribeclient.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttsubscribeclient.o: ..\w5500\w5500.h
-..\obj\mqttsubscribeclient.o: ..\w5500\spi.h
-..\obj\mqttsubscribeclient.o: ..\w5500\Types.h
-..\obj\mqttsubscribeclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttsubscribeserver.d

@@ -1,44 +0,0 @@
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\MQTTSubscribeServer.c
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttsubscribeserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttsubscribeserver.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttsubscribeserver.o: ..\w5500\socket.h
-..\obj\mqttsubscribeserver.o: ..\USER\stm32f10x.h
-..\obj\mqttsubscribeserver.o: ..\CORE\core_cm3.h
-..\obj\mqttsubscribeserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttsubscribeserver.o: ..\USER\system_stm32f10x.h
-..\obj\mqttsubscribeserver.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttsubscribeserver.o: ..\USER\stm32f10x.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttsubscribeserver.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttsubscribeserver.o: ..\w5500\w5500.h
-..\obj\mqttsubscribeserver.o: ..\w5500\spi.h
-..\obj\mqttsubscribeserver.o: ..\w5500\Types.h
-..\obj\mqttsubscribeserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttunsubscribeclient.d

@@ -1,44 +0,0 @@
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\MQTTUnsubscribeClient.c
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttunsubscribeclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttunsubscribeclient.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttunsubscribeclient.o: ..\w5500\socket.h
-..\obj\mqttunsubscribeclient.o: ..\USER\stm32f10x.h
-..\obj\mqttunsubscribeclient.o: ..\CORE\core_cm3.h
-..\obj\mqttunsubscribeclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttunsubscribeclient.o: ..\USER\system_stm32f10x.h
-..\obj\mqttunsubscribeclient.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttunsubscribeclient.o: ..\USER\stm32f10x.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttunsubscribeclient.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttunsubscribeclient.o: ..\w5500\w5500.h
-..\obj\mqttunsubscribeclient.o: ..\w5500\spi.h
-..\obj\mqttunsubscribeclient.o: ..\w5500\Types.h
-..\obj\mqttunsubscribeclient.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/mqttunsubscribeserver.d

@@ -1,44 +0,0 @@
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\MQTTUnsubscribeServer.c
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\MQTTConnect.h
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\MQTTPublish.h
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\MQTTSubscribe.h
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\MQTTUnsubscribe.h
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\MQTTFormat.h
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\StackTrace.h
-..\obj\mqttunsubscribeserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\mqttunsubscribeserver.o: ..\MQTT\lib\MQTTPacket.h
-..\obj\mqttunsubscribeserver.o: ..\w5500\socket.h
-..\obj\mqttunsubscribeserver.o: ..\USER\stm32f10x.h
-..\obj\mqttunsubscribeserver.o: ..\CORE\core_cm3.h
-..\obj\mqttunsubscribeserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\mqttunsubscribeserver.o: ..\USER\system_stm32f10x.h
-..\obj\mqttunsubscribeserver.o: ..\USER\stm32f10x_conf.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\mqttunsubscribeserver.o: ..\USER\stm32f10x.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\mqttunsubscribeserver.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\mqttunsubscribeserver.o: ..\w5500\w5500.h
-..\obj\mqttunsubscribeserver.o: ..\w5500\spi.h
-..\obj\mqttunsubscribeserver.o: ..\w5500\Types.h
-..\obj\mqttunsubscribeserver.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

OBJ/myfreertos.d

@@ -1,65 +0,0 @@
-..\obj\myfreertos.o: ..\myfreertos\myfreertos.c
-..\obj\myfreertos.o: ..\myfreertos\myfreertos.h
-..\obj\myfreertos.o: ..\FreeRTOS\include\FreeRTOS.h
-..\obj\myfreertos.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
-..\obj\myfreertos.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\myfreertos.o: ..\FreeRTOS\include\FreeRTOSConfig.h
-..\obj\myfreertos.o: ..\SYSTEM\system.h
-..\obj\myfreertos.o: ..\USER\stm32f10x.h
-..\obj\myfreertos.o: ..\CORE\core_cm3.h
-..\obj\myfreertos.o: ..\USER\system_stm32f10x.h
-..\obj\myfreertos.o: ..\USER\stm32f10x_conf.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\myfreertos.o: ..\USER\stm32f10x.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\myfreertos.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\myfreertos.o: ..\SYSTEM\usart.h
-..\obj\myfreertos.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\myfreertos.o: ..\FreeRTOS\include\projdefs.h
-..\obj\myfreertos.o: ..\FreeRTOS\include\portable.h
-..\obj\myfreertos.o: ..\FreeRTOS\include\deprecated_definitions.h
-..\obj\myfreertos.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
-..\obj\myfreertos.o: ..\FreeRTOS\include\mpu_wrappers.h
-..\obj\myfreertos.o: ..\FreeRTOS\include\task.h
-..\obj\myfreertos.o: ..\FreeRTOS\include\list.h
-..\obj\myfreertos.o: ..\SYSTEM\SysTick.h
-..\obj\myfreertos.o: ..\HARDWARE\W25Q128_Ins.h
-..\obj\myfreertos.o: ..\HARDWARE\rs485.h
-..\obj\myfreertos.o: ..\HARDWARE\write.h
-..\obj\myfreertos.o: ..\HARDWARE\Relays.h
-..\obj\myfreertos.o: ..\HARDWARE\OSC.h
-..\obj\myfreertos.o: ..\HARDWARE\PWM.h
-..\obj\myfreertos.o: ..\HARDWARE\rtc.h
-..\obj\myfreertos.o: ..\HARDWARE\bufcut.h
-..\obj\myfreertos.o: ..\HARDWARE\iwdg.h
-..\obj\myfreertos.o: ..\HARDWARE\PID.h
-..\obj\myfreertos.o: ..\HARDWARE\PWMOUT.h
-..\obj\myfreertos.o: ..\w5500\w5500api.h
-..\obj\myfreertos.o: ..\w5500\spi.h
-..\obj\myfreertos.o: ..\w5500\w5500.h
-..\obj\myfreertos.o: ..\w5500\Types.h
-..\obj\myfreertos.o: ..\w5500\socket.h
-..\obj\myfreertos.o: ..\dhcp\dhcp.h
-..\obj\myfreertos.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
-..\obj\myfreertos.o: ..\dns\dns.h
-..\obj\myfreertos.o: ..\MQTT\mqtt_api.h

OBJ/myspi.d

@@ -1,32 +0,0 @@
-..\obj\myspi.o: ..\HARDWARE\MYSPI.c
-..\obj\myspi.o: ..\HARDWARE\MYSPI.h
-..\obj\myspi.o: ..\SYSTEM\system.h
-..\obj\myspi.o: ..\USER\stm32f10x.h
-..\obj\myspi.o: ..\CORE\core_cm3.h
-..\obj\myspi.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\myspi.o: ..\USER\system_stm32f10x.h
-..\obj\myspi.o: ..\USER\stm32f10x_conf.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\myspi.o: ..\USER\stm32f10x.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\myspi.o: ..\STM32F10x_FWLib\inc\misc.h

OBJ/osc.d

@@ -1,34 +0,0 @@
-..\obj\osc.o: ..\HARDWARE\OSC.c
-..\obj\osc.o: ..\USER\stm32f10x.h
-..\obj\osc.o: ..\CORE\core_cm3.h
-..\obj\osc.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
-..\obj\osc.o: ..\USER\system_stm32f10x.h
-..\obj\osc.o: ..\USER\stm32f10x_conf.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
-..\obj\osc.o: ..\USER\stm32f10x.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
-..\obj\osc.o: ..\STM32F10x_FWLib\inc\misc.h
-..\obj\osc.o: ..\SYSTEM\USART.h
-..\obj\osc.o: ..\SYSTEM\system.h
-..\obj\osc.o: D:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-..\obj\osc.o: ..\SYSTEM\SysTick.h