# Pulsates an LED connected to GPIO pin 1 with a suitable resistor 4 times using softPwm
# softPwm uses a fixed frequency
import wiringpi2

OUTPUT = 1

PIN_TO_PWM = 1

wiringpi2.wiringPiSetup()
wiringpi2.pinMode(PIN_TO_PWM,OUTPUT)
wiringpi2.softPwmCreate(PIN_TO_PWM,0,100) # Setup PWM using Pin, Initial Value and Range parameters

for time in range(0,4):
	for brightness in range(0,100): # Going from 0 to 100 will give us full off to full on
		wiringpi2.softPwmWrite(PIN_TO_PWM,brightness) # Change PWM duty cycle
		wiringpi2.delay(10) # Delay for 0.2 seconds
	for brightness in reversed(range(0,100)):
		wiringpi2.softPwmWrite(PIN_TO_PWM,brightness)
		wiringpi2.delay(10)