Updated to reflect wiringpi2 to wiringpi rename

MANIFEST.in

@@ -3,5 +3,5 @@ graft WiringPi/devLib
 include README.md
 include LICENSE.txt
 include setup.cfg
-include wiringpi2.py
+include wiringpi.py
 include wiringpi_wrap.c

README.md

@@ -44,50 +44,50 @@ Description incoming!
 
 ##Usage
 
-	import wiringpi2
+	import wiringpi
 	
-	wiringpi2.wiringPiSetup() # For sequential pin numbering, one of these MUST be called before using IO functions
+	wiringpi.wiringPiSetup() # For sequential pin numbering, one of these MUST be called before using IO functions
 	# OR
-	wiringpi2.wiringPiSetupSys() # For /sys/class/gpio with GPIO pin numbering
+	wiringpi.wiringPiSetupSys() # For /sys/class/gpio with GPIO pin numbering
 	# OR
-	wiringpi2.wiringPiSetupGpio() # For GPIO pin numbering
+	wiringpi.wiringPiSetupGpio() # For GPIO pin numbering
 
 
 Setting up IO expanders (This example was tested on a quick2wire board with one digital IO expansion board connected via I2C):
 
-	wiringpi2.mcp23017Setup(65,0x20)
-	wiringpi2.pinMode(65,1)
-	wiringpi2.digitalWrite(65,1)
+	wiringpi.mcp23017Setup(65,0x20)
+	wiringpi.pinMode(65,1)
+	wiringpi.digitalWrite(65,1)
 
 **General IO:**
 
-	wiringpi2.pinMode(6,1) # Set pin 6 to 1 ( OUTPUT )
-	wiringpi2.digitalWrite(6,1) # Write 1 ( HIGH ) to pin 6
-	wiringpi2.digitalRead(6) # Read pin 6
+	wiringpi.pinMode(6,1) # Set pin 6 to 1 ( OUTPUT )
+	wiringpi.digitalWrite(6,1) # Write 1 ( HIGH ) to pin 6
+	wiringpi.digitalRead(6) # Read pin 6
 
 **Setting up a peripheral:**
 WiringPi2 supports expanding your range of available "pins" by setting up a port expander. The implementation details of
 your port expander will be handled transparently, and you can write to the additional pins ( starting from PIN_OFFSET >= 64 )
 as if they were normal pins on the Pi.
 
-	wiringpi2.mcp23017Setup(PIN_OFFSET,I2C_ADDR)
+	wiringpi.mcp23017Setup(PIN_OFFSET,I2C_ADDR)
 
 **Soft Tone**
 
 Hook a speaker up to your Pi and generate music with softTone. Also useful for generating frequencies for other uses such as modulating A/C.
 
-	wiringpi2.softToneCreate(PIN)
-	wiringpi2.softToneWrite(PIN,FREQUENCY)
+	wiringpi.softToneCreate(PIN)
+	wiringpi.softToneWrite(PIN,FREQUENCY)
 
 **Bit shifting:**
 
-	wiringpi2.shiftOut(1,2,0,123) # Shift out 123 (b1110110, byte 0-255) to data pin 1, clock pin 2
+	wiringpi.shiftOut(1,2,0,123) # Shift out 123 (b1110110, byte 0-255) to data pin 1, clock pin 2
 
 **Serial:**
 
-	serial = wiringpi2.serialOpen('/dev/ttyAMA0',9600) # Requires device/baud and returns an ID
-	wiringpi2.serialPuts(serial,"hello")
-	wiringpi2.serialClose(serial) # Pass in ID
+	serial = wiringpi.serialOpen('/dev/ttyAMA0',9600) # Requires device/baud and returns an ID
+	wiringpi.serialPuts(serial,"hello")
+	wiringpi.serialClose(serial) # Pass in ID
 
 **Full details at:**
 http://www.wiringpi.com

examples/callback.py

@@ -1,14 +1,14 @@
-import wiringpi2
+import wiringpi
 PIN_TO_SENSE = 23
 
 def gpio_callback():
     print "GPIO_CALLBACK!"
 
-wiringpi2.wiringPiSetupGpio()
-wiringpi2.pinMode(PIN_TO_SENSE, wiringpi2.GPIO.INPUT)
-wiringpi2.pullUpDnControl(PIN_TO_SENSE, wiringpi2.GPIO.PUD_UP)
+wiringpi.wiringPiSetupGpio()
+wiringpi.pinMode(PIN_TO_SENSE, wiringpi.GPIO.INPUT)
+wiringpi.pullUpDnControl(PIN_TO_SENSE, wiringpi.GPIO.PUD_UP)
 
-wiringpi2.wiringPiISR(PIN_TO_SENSE, wiringpi2.GPIO.INT_EDGE_BOTH, gpio_callback)
+wiringpi.wiringPiISR(PIN_TO_SENSE, wiringpi.GPIO.INT_EDGE_BOTH, gpio_callback)
 
 while True:
-    wiringpi2.delay(2000)
+    wiringpi.delay(2000)

examples/delay.py

@@ -1,5 +1,5 @@
 # Demonstrates use of Arduino-like delay function
-import wiringpi2
+import wiringpi
 print 'Hello World'
-wiringpi2.delay(1500) # Delay for 1.5 seconds
+wiringpi.delay(1500) # Delay for 1.5 seconds
 print 'Hi again!'

examples/ladder-board.py

@@ -1,4 +1,4 @@
-import wiringpi2 as wiringpi
+import wiringpi
 INPUT = 0
 OUTPUT = 1
 LOW = 0

examples/n5510-mcp23017.py

@@ -1,5 +1,5 @@
 # Turns on each pin of an mcp23017 on address 0x20 ( quick2wire IO expander )
-import wiringpi2 as wiringpi
+import wiringpi
 
 PIN_BACKLIGHT = 67 # LED
 PIN_SCLK = 68 # Clock SCLK
@@ -92,4 +92,4 @@ for time in range(0,4):
   lcd_clear()
   wiringpi.delay(1000)
   lcd_fill()
-  wiringpi.delay(1000)
+  wiringpi.delay(1000)

examples/quick2wire-io.py

@@ -1,15 +1,15 @@
 # Turns on each pin of an mcp23017 on address 0x20 ( quick2wire IO expander )
-import wiringpi2
+import wiringpi
 
 pin_base = 65
 i2c_addr = 0x20
 pins = [65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80]
 
-wiringpi2.wiringPiSetup()
-wiringpi2.mcp23017Setup(pin_base,i2c_addr)
+wiringpi.wiringPiSetup()
+wiringpi.mcp23017Setup(pin_base,i2c_addr)
 
 for pin in pins:
-	wiringpi2.pinMode(pin,1)
-	wiringpi2.digitalWrite(pin,1)
-#	wiringpi2.delay(1000)
-#	wiringpi2.digitalWrite(pin,0)
+	wiringpi.pinMode(pin,1)
+	wiringpi.digitalWrite(pin,1)
+#	wiringpi.delay(1000)
+#	wiringpi.digitalWrite(pin,0)

examples/softpwm.py

@@ -1,19 +1,19 @@
 # Pulsates an LED connected to GPIO pin 1 with a suitable resistor 4 times using softPwm
 # softPwm uses a fixed frequency
-import wiringpi2
+import wiringpi
 
 OUTPUT = 1
 
 PIN_TO_PWM = 1
 
-wiringpi2.wiringPiSetup()
-wiringpi2.pinMode(PIN_TO_PWM,OUTPUT)
-wiringpi2.softPwmCreate(PIN_TO_PWM,0,100) # Setup PWM using Pin, Initial Value and Range parameters
+wiringpi.wiringPiSetup()
+wiringpi.pinMode(PIN_TO_PWM,OUTPUT)
+wiringpi.softPwmCreate(PIN_TO_PWM,0,100) # Setup PWM using Pin, Initial Value and Range parameters
 
 for time in range(0,4):
 	for brightness in range(0,100): # Going from 0 to 100 will give us full off to full on
-		wiringpi2.softPwmWrite(PIN_TO_PWM,brightness) # Change PWM duty cycle
-		wiringpi2.delay(10) # Delay for 0.2 seconds
+		wiringpi.softPwmWrite(PIN_TO_PWM,brightness) # Change PWM duty cycle
+		wiringpi.delay(10) # Delay for 0.2 seconds
 	for brightness in reversed(range(0,100)):
-		wiringpi2.softPwmWrite(PIN_TO_PWM,brightness)
-		wiringpi2.delay(10)
+		wiringpi.softPwmWrite(PIN_TO_PWM,brightness)
+		wiringpi.delay(10)

examples/two-mcp23017.py

@@ -1,18 +1,18 @@
 # Turns on each pin of an mcp23017 on address 0x20 ( quick2wire IO expander )
-import wiringpi2
+import wiringpi
 
 pin_base = 65
 i2c_addr = 0x20
 i2c_addr_2 = 0x21
 #pins = [65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80]
 
-wiringpi2.wiringPiSetup()
-wiringpi2.mcp23017Setup(pin_base,i2c_addr)
-wiringpi2.mcp23017Setup(pin_base+16,i2c_addr_2)
+wiringpi.wiringPiSetup()
+wiringpi.mcp23017Setup(pin_base,i2c_addr)
+wiringpi.mcp23017Setup(pin_base+16,i2c_addr_2)
 
 #for pin in pins:
 for pin in range(65,96):
-	wiringpi2.pinMode(pin,1)
-	wiringpi2.digitalWrite(pin,1)
-#	wiringpi2.delay(1000)
-#	wiringpi2.digitalWrite(pin,0)
+	wiringpi.pinMode(pin,1)
+	wiringpi.digitalWrite(pin,1)
+#	wiringpi.delay(1000)
+#	wiringpi.digitalWrite(pin,0)

tests/piglow.py

@@ -1,4 +1,4 @@
-import wiringpi2 as wiringpi
+import wiringpi
 io = wiringpi.GPIO(wiringpi.GPIO.WPI_MODE_PINS)
 io.piGlowSetup()
 io.piGlowLeg(1,100)

tests/test.py

@@ -1,4 +1,4 @@
-import wiringpi2 as wiringpi
+import wiringpi
 io = wiringpi.GPIO(wiringpi.GPIO.WPI_MODE_PINS)
 print io.digitalRead(1)
 print io.analogRead(1)