diff --git a/WiringPi/COPYING.LESSER b/WiringPi/COPYING.LESSER
deleted file mode 100644
index 65c5ca8..0000000
--- a/WiringPi/COPYING.LESSER
+++ /dev/null
@@ -1,165 +0,0 @@
- GNU LESSER GENERAL PUBLIC LICENSE
- Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc.
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
- This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
- 0. Additional Definitions.
-
- As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
- "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
- An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
- A "Combined Work" is a work produced by combining or linking an
-Application with the Library. The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
- The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
- The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
- 1. Exception to Section 3 of the GNU GPL.
-
- You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
- 2. Conveying Modified Versions.
-
- If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
- a) under this License, provided that you make a good faith effort to
- ensure that, in the event an Application does not supply the
- function or data, the facility still operates, and performs
- whatever part of its purpose remains meaningful, or
-
- b) under the GNU GPL, with none of the additional permissions of
- this License applicable to that copy.
-
- 3. Object Code Incorporating Material from Library Header Files.
-
- The object code form of an Application may incorporate material from
-a header file that is part of the Library. You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
- a) Give prominent notice with each copy of the object code that the
- Library is used in it and that the Library and its use are
- covered by this License.
-
- b) Accompany the object code with a copy of the GNU GPL and this license
- document.
-
- 4. Combined Works.
-
- You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
- a) Give prominent notice with each copy of the Combined Work that
- the Library is used in it and that the Library and its use are
- covered by this License.
-
- b) Accompany the Combined Work with a copy of the GNU GPL and this license
- document.
-
- c) For a Combined Work that displays copyright notices during
- execution, include the copyright notice for the Library among
- these notices, as well as a reference directing the user to the
- copies of the GNU GPL and this license document.
-
- d) Do one of the following:
-
- 0) Convey the Minimal Corresponding Source under the terms of this
- License, and the Corresponding Application Code in a form
- suitable for, and under terms that permit, the user to
- recombine or relink the Application with a modified version of
- the Linked Version to produce a modified Combined Work, in the
- manner specified by section 6 of the GNU GPL for conveying
- Corresponding Source.
-
- 1) Use a suitable shared library mechanism for linking with the
- Library. A suitable mechanism is one that (a) uses at run time
- a copy of the Library already present on the user's computer
- system, and (b) will operate properly with a modified version
- of the Library that is interface-compatible with the Linked
- Version.
-
- e) Provide Installation Information, but only if you would otherwise
- be required to provide such information under section 6 of the
- GNU GPL, and only to the extent that such information is
- necessary to install and execute a modified version of the
- Combined Work produced by recombining or relinking the
- Application with a modified version of the Linked Version. (If
- you use option 4d0, the Installation Information must accompany
- the Minimal Corresponding Source and Corresponding Application
- Code. If you use option 4d1, you must provide the Installation
- Information in the manner specified by section 6 of the GNU GPL
- for conveying Corresponding Source.)
-
- 5. Combined Libraries.
-
- You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
- a) Accompany the combined library with a copy of the same work based
- on the Library, uncombined with any other library facilities,
- conveyed under the terms of this License.
-
- b) Give prominent notice with the combined library that part of it
- is a work based on the Library, and explaining where to find the
- accompanying uncombined form of the same work.
-
- 6. Revised Versions of the GNU Lesser General Public License.
-
- The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
- Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
- If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.
diff --git a/WiringPi/INSTALL b/WiringPi/INSTALL
deleted file mode 100644
index 8e0c43c..0000000
--- a/WiringPi/INSTALL
+++ /dev/null
@@ -1,36 +0,0 @@
-
-How to install wiringPi
-=======================
-
-The easiest way is to use the supplied 'build' script:
-
- ./build
-
-that should do a complete install or upgrade of wiringPi for you.
-
-That will install a dynamic library.
-
-Some distributions do not have /usr/local/lib in the default LD_LIBRARY_PATH. To
-fix this, you need to edit /etc/ld.so.conf and add in a single line:
-
- /usr/local/lib
-
-then run the ldconfig command.
-
- sudo ldconfig
-
-If you want to install a static library, you may need to do this manually:
-
- cd wiringPi
- make static
- sudo make install-static
-
-
-To un-install wiringPi:
-
- ./build uninstall
-
-Gordon Henderson
-
-projects@drogon.net
-https://projects.drogon.net/
diff --git a/WiringPi/People b/WiringPi/People
deleted file mode 100644
index b339494..0000000
--- a/WiringPi/People
+++ /dev/null
@@ -1,33 +0,0 @@
-
-Just a quick note to some people who've provided help, suggestions,
-bug-fixes, etc. along the way...
-
-Nick Lott: (And others)
- Hints about making it work with C++
-
-Philipp Stefan Neininger:
- Minor bug in the Makefile to do with cross compiling
-
-Chris McSweeny
- Hints and tips about the use of arithmetic in gettimeofday()
- inside the dealyMicrosecondsHard() function.
- And spotting a couple of schoolboy errors in the (experimental)
- softServo code, prompting me to completely re-write it.
-
-Armin (Via projects website)
- Some pointers about the i2c-dev.h files.
-
-Arno Wagner
- Suggestions for the mmap calls in wiringPiSetup()
-
-CHARLES Thibaut:
- A small issue in softTone
-
-Xian Stannard
- Fixing some typos in the man page!
-
-Andre Crone
- Suggested the __WIRING_PI.H__ round wiringPi.h
-
-Rik Teerling
- Pointing out some silly mistooks in the I2C code...
diff --git a/WiringPi/README.TXT b/WiringPi/README.TXT
deleted file mode 100644
index 7789b2e..0000000
--- a/WiringPi/README.TXT
+++ /dev/null
@@ -1,26 +0,0 @@
-
-wiringPi README
-===============
-
-Please note that the official way to get wiringPi is via git from
-git.drogon.net and not GitHub.
-
-ie.
-
- git clone git://git.drogon.net/wiringPi
-
-The version of wiringPi held on GitHub by "Gadgetoid" is used to build the
-wiringPython, Ruby, Perl, etc. wrappers for these other languages. This
-version may lag the official Drogon release. Pull requests may not be
-accepted to Github....
-
-Please see
-
- http://wiringpi.com/
-
-for the official documentation, etc. and the best way to submit bug reports, etc.
-is by sending an email to projects@drogon.net
-
-Thanks!
-
- -Gordon
diff --git a/WiringPi/VERSION b/WiringPi/VERSION
deleted file mode 100644
index 8bd2249..0000000
--- a/WiringPi/VERSION
+++ /dev/null
@@ -1 +0,0 @@
-2.25
diff --git a/WiringPi/build b/WiringPi/build
deleted file mode 100755
index d38ad1b..0000000
--- a/WiringPi/build
+++ /dev/null
@@ -1,174 +0,0 @@
-#!/bin/sh
-
-# build
-# Simple wiringPi build and install script
-#
-# Copyright (c) 2012-2015 Gordon Henderson
-#################################################################################
-# This file is part of wiringPi:
-# Wiring Compatable library for the Raspberry Pi
-#
-# wiringPi is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# wiringPi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with wiringPi. If not, see .
-#################################################################################
-#
-# wiringPi is designed to run on a Raspberry Pi only.
-# However if you're clever enough to actually look at this script to
-# see why it's not building for you, then good luck.
-#
-# To everyone else: Stop using cheap alternatives. Support the
-# Raspberry Pi Foundation as they're the only ones putting money
-# back into education!
-#################################################################################
-
-check_make_ok() {
- if [ $? != 0 ]; then
- echo ""
- echo "Make Failed..."
- echo "Please check the messages and fix any problems. If you're still stuck,"
- echo "then please email all the output and as many details as you can to"
- echo " projects@drogon.net"
- echo ""
- exit 1
- fi
-}
-
-if [ x$1 = "xclean" ]; then
- cd wiringPi
- echo -n "wiringPi: " ; make clean
- cd ../devLib
- echo -n "DevLib: " ; make clean
- cd ../gpio
- echo -n "gpio: " ; make clean
- cd ../examples
- echo -n "Examples: " ; make clean
- cd Gertboard
- echo -n "Gertboard: " ; make clean
- cd ../PiFace
- echo -n "PiFace: " ; make clean
- cd ../q2w
- echo -n "Quick2Wire: " ; make clean
- cd ../PiGlow
- echo -n "PiGlow: " ; make clean
- exit
-fi
-
-if [ x$1 = "xuninstall" ]; then
- cd wiringPi
- echo -n "wiringPi: " ; sudo make uninstall
- cd ../devLib
- echo -n "DevLib: " ; sudo make uninstall
- cd ../gpio
- echo -n "gpio: " ; sudo make uninstall
- exit
-fi
-
-# Only if you know what you're doing!
-
-if [ x$1 = "xdebian" ]; then
- here=`pwd`
- cd debian/wiringPi
- rm -rf usr
- cd $here/wiringPi
- make install-deb
- cd $here/devLib
- make install-deb
- cd $here/gpio
- make install-deb
- cd $here/debian
- fakeroot dpkg-deb --build wiringPi
- mv wiringPi.deb wiringpi-`cat $here/VERSION`-1.deb
- exit
-fi
-
-if [ x$1 != "x" ]; then
- echo "Usage: $0 [clean | uninstall]"
- exit 1
-fi
-
- echo "wiringPi Build script"
- echo "====================="
- echo
-
- hardware=`fgrep Hardware /proc/cpuinfo | head -1 | awk '{ print $3 }'`
-
-# if [ x$hardware != "xBCM2708" ]; then
-# echo ""
-# echo " +------------------------------------------------------------+"
-# echo " | wiringPi is designed to run on the Raspberry Pi only. |"
-# echo " | This processor does not appear to be a Raspberry Pi. |"
-# echo " +------------------------------------------------------------+"
-# echo " | In the unlikely event that you think it is a Raspberry Pi, |"
-# echo " | then please accept my apologies and email the contents of |"
-# echo " | /proc/cpuinfo to projects@drogon.net. |"
-# echo " | - Thanks, Gordon |"
-# echo " +------------------------------------------------------------+"
-# echo ""
-# exit 1
-# fi
-
-
- echo
- echo "WiringPi Library"
- cd wiringPi
- sudo make uninstall
- if [ x$1 = "xstatic" ]; then
- make -j5 static
- check_make_ok
- sudo make install-static
- else
- make -j5
- check_make_ok
- sudo make install
- fi
- check_make_ok
-
- echo
- echo "WiringPi Devices Library"
- cd ../devLib
- sudo make uninstall
- if [ x$1 = "xstatic" ]; then
- make -j5 static
- check_make_ok
- sudo make install-static
- else
- make -j5
- check_make_ok
- sudo make install
- fi
- check_make_ok
-
- echo
- echo "GPIO Utility"
- cd ../gpio
- make -j5
- check_make_ok
- sudo make install
- check_make_ok
-
-# echo
-# echo "Examples"
-# cd ../examples
-# make
-# cd ..
-
-echo
-echo All Done.
-echo ""
-echo "NOTE: To compile programs with wiringPi, you need to add:"
-echo " -lwiringPi"
-echo " to your compile line(s) To use the Gertboard, MaxDetect, etc."
-echo " code (the devLib), you need to also add:"
-echo " -lwiringPiDev"
-echo " to your compile line(s)."
-echo ""
diff --git a/WiringPi/debian/wiringPi/DEBIAN/control b/WiringPi/debian/wiringPi/DEBIAN/control
deleted file mode 100644
index 73ee094..0000000
--- a/WiringPi/debian/wiringPi/DEBIAN/control
+++ /dev/null
@@ -1,10 +0,0 @@
-Package: wiringpi
-Version: 2.24
-Section: libraries
-Priority: optional
-Architecture: armhf
-Depends: libc6
-Maintainer: Gordon Henderson
-Description: The wiringPi libraries, headers and gpio command
- Libraries to allow GPIO access on a Raspberry Pi from C and C++
- programs as well as from the command-line
diff --git a/WiringPi/debian/wiringPi/DEBIAN/postinst b/WiringPi/debian/wiringPi/DEBIAN/postinst
deleted file mode 100755
index 4997e98..0000000
--- a/WiringPi/debian/wiringPi/DEBIAN/postinst
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-set -e
-/bin/chown root.root /usr/bin/gpio
-/bin/chmod 4755 /usr/bin/gpio
-/sbin/ldconfig
diff --git a/WiringPi/debian/wiringPi/DEBIAN/postrm b/WiringPi/debian/wiringPi/DEBIAN/postrm
deleted file mode 100755
index 4be8c58..0000000
--- a/WiringPi/debian/wiringPi/DEBIAN/postrm
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-/sbin/ldconfig
diff --git a/WiringPi/devLib/Makefile b/WiringPi/devLib/Makefile
deleted file mode 100644
index d62b532..0000000
--- a/WiringPi/devLib/Makefile
+++ /dev/null
@@ -1,131 +0,0 @@
-#
-# Makefile:
-# wiringPi device - Wiring Compatable library for the Raspberry Pi
-#
-# Copyright (c) 2012-2015 Gordon Henderson
-#################################################################################
-# This file is part of wiringPi:
-# https://projects.drogon.net/raspberry-pi/wiringpi/
-#
-# wiringPi is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# wiringPi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with wiringPi. If not, see .
-#################################################################################
-
-VERSION=$(shell cat ../VERSION)
-DESTDIR=/usr
-PREFIX=/local
-
-STATIC=libwiringPiDev.a
-DYNAMIC=libwiringPiDev.so.$(VERSION)
-
-#DEBUG = -g -O0
-DEBUG = -O2
-CC = gcc
-INCLUDE = -I.
-DEFS = -D_GNU_SOURCE
-CFLAGS = $(DEBUG) $(DEFS) -Wformat=2 -Wall -Winline $(INCLUDE) -pipe -fPIC
-
-LIBS =
-
-###############################################################################
-
-SRC = ds1302.c maxdetect.c piNes.c \
- gertboard.c piFace.c \
- lcd128x64.c lcd.c \
- piGlow.c
-
-OBJ = $(SRC:.c=.o)
-
-HEADERS = ds1302.h gertboard.h lcd128x64.h lcd.h maxdetect.h piFace.h piGlow.h piNes.h
-
-all: $(DYNAMIC)
-
-static: $(STATIC)
-
-$(STATIC): $(OBJ)
- @echo "[Link (Static)]"
- @ar rcs $(STATIC) $(OBJ)
- @ranlib $(STATIC)
-# @size $(STATIC)
-
-$(DYNAMIC): $(OBJ)
- @echo "[Link (Dynamic)]"
- @$(CC) -shared -Wl,-soname,libwiringPiDev.so -o libwiringPiDev.so.$(VERSION) -lpthread $(OBJ)
-
-.c.o:
- @echo [Compile] $<
- @$(CC) -c $(CFLAGS) $< -o $@
-
-.PHONY: clean
-clean:
- @echo "[Clean]"
- @rm -f $(OBJ) $(OBJ_I2C) *~ core tags Makefile.bak libwiringPiDev.*
-
-.PHONY: tags
-tags: $(SRC)
- @echo [ctags]
- @ctags $(SRC)
-
-
-.PHONY: install
-install: $(DYNAMIC)
- @echo "[Install Headers]"
- @install -m 0755 -d $(DESTDIR)$(PREFIX)/include
- @install -m 0644 $(HEADERS) $(DESTDIR)$(PREFIX)/include
- @echo "[Install Dynamic Lib]"
- @install -m 0755 -d $(DESTDIR)$(PREFIX)/lib
- @install -m 0755 libwiringPiDev.so.$(VERSION) $(DESTDIR)$(PREFIX)/lib/libwiringPiDev.so.$(VERSION)
- @ln -sf $(DESTDIR)$(PREFIX)/lib/libwiringPiDev.so.$(VERSION) $(DESTDIR)/lib/libwiringPiDev.so
- @ldconfig
-
-.PHONY: install-static
-install-static: $(STATIC)
- @echo "[Install Headers]"
- @install -m 0755 -d $(DESTDIR)$(PREFIX)/include
- @install -m 0644 $(HEADERS) $(DESTDIR)$(PREFIX)/include
- @echo "[Install Static Lib]"
- @install -m 0755 -d $(DESTDIR)$(PREFIX)/lib
- @install -m 0755 libwiringPiDev.a $(DESTDIR)$(PREFIX)/lib
-
-.PHONY: install-deb
-install-deb: $(DYNAMIC)
- @echo "[Install Headers: deb]"
- @install -m 0755 -d ~/wiringPi/debian/wiringPi/usr/include
- @install -m 0644 $(HEADERS) ~/wiringPi/debian/wiringPi/usr/include
- @echo "[Install Dynamic Lib: deb]"
- install -m 0755 -d ~/wiringPi/debian/wiringPi/usr/lib
- install -m 0755 libwiringPiDev.so.$(VERSION) ~/wiringPi/debian/wiringPi/usr/lib/libwiringPiDev.so.$(VERSION)
- ln -sf ~/wiringPi/debian/wiringPi/usr/lib/libwiringPi.so.$(VERSION) ~/wiringPi/debian/wiringPi/usr/lib/libwiringPiDev.so
-
-.PHONY: uninstall
-uninstall:
- @echo "[UnInstall]"
- @cd $(DESTDIR)$(PREFIX)/include/ && rm -f $(HEADERS)
- @cd $(DESTDIR)$(PREFIX)/lib/ && rm -f libwiringPiDev.*
- @ldconfig
-
-
-.PHONY: depend
-depend:
- makedepend -Y $(SRC)
-
-# DO NOT DELETE
-
-ds1302.o: ds1302.h
-maxdetect.o: maxdetect.h
-piNes.o: piNes.h
-gertboard.o: gertboard.h
-piFace.o: piFace.h
-lcd128x64.o: font.h lcd128x64.h
-lcd.o: lcd.h
-piGlow.o: piGlow.h
diff --git a/WiringPi/devLib/ds1302.c b/WiringPi/devLib/ds1302.c
deleted file mode 100644
index cf64de7..0000000
--- a/WiringPi/devLib/ds1302.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * ds1302.c:
- * Real Time clock
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-
-#include
-
-#include "ds1302.h"
-
-// Register defines
-
-#define RTC_SECS 0
-#define RTC_MINS 1
-#define RTC_HOURS 2
-#define RTC_DATE 3
-#define RTC_MONTH 4
-#define RTC_DAY 5
-#define RTC_YEAR 6
-#define RTC_WP 7
-#define RTC_TC 8
-#define RTC_BM 31
-
-
-// Locals
-
-static int dPin, cPin, sPin ;
-
-/*
- * dsShiftIn:
- * Shift a number in from the chip, LSB first. Note that the data is
- * sampled on the trailing edge of the last clock, so it's valid immediately.
- *********************************************************************************
- */
-
-static unsigned int dsShiftIn (void)
-{
- uint8_t value = 0 ;
- int i ;
-
- pinMode (dPin, INPUT) ; delayMicroseconds (1) ;
-
- for (i = 0 ; i < 8 ; ++i)
- {
- value |= (digitalRead (dPin) << i) ;
- digitalWrite (cPin, HIGH) ; delayMicroseconds (1) ;
- digitalWrite (cPin, LOW) ; delayMicroseconds (1) ;
- }
-
- return value;
-}
-
-
-/*
- * dsShiftOut:
- * A normal LSB-first shift-out, just slowed down a bit - the Pi is
- * a bit faster than the chip can handle.
- *********************************************************************************
- */
-
-static void dsShiftOut (unsigned int data)
-{
- int i ;
-
- pinMode (dPin, OUTPUT) ;
-
- for (i = 0 ; i < 8 ; ++i)
- {
- digitalWrite (dPin, data & (1 << i)) ; delayMicroseconds (1) ;
- digitalWrite (cPin, HIGH) ; delayMicroseconds (1) ;
- digitalWrite (cPin, LOW) ; delayMicroseconds (1) ;
- }
-}
-
-
-/*
- * ds1302regRead: ds1302regWrite:
- * Read/Write a value to an RTC Register or RAM location on the chip
- *********************************************************************************
- */
-
-static unsigned int ds1302regRead (const int reg)
-{
- unsigned int data ;
-
- digitalWrite (sPin, HIGH) ; delayMicroseconds (1) ;
- dsShiftOut (reg) ;
- data = dsShiftIn () ;
- digitalWrite (sPin, LOW) ; delayMicroseconds (1) ;
-
- return data ;
-}
-
-static void ds1302regWrite (const int reg, const unsigned int data)
-{
- digitalWrite (sPin, HIGH) ; delayMicroseconds (1) ;
- dsShiftOut (reg) ;
- dsShiftOut (data) ;
- digitalWrite (sPin, LOW) ; delayMicroseconds (1) ;
-}
-
-
-/*
- * ds1302rtcWrite: ds1302rtcRead:
- * Writes/Reads the data to/from the RTC register
- *********************************************************************************
- */
-
-unsigned int ds1302rtcRead (const int reg)
-{
- return ds1302regRead (0x81 | ((reg & 0x1F) << 1)) ;
-}
-
-void ds1302rtcWrite (int reg, unsigned int data)
-{
- ds1302regWrite (0x80 | ((reg & 0x1F) << 1), data) ;
-}
-
-
-/*
- * ds1302ramWrite: ds1302ramRead:
- * Writes/Reads the data to/from the RTC register
- *********************************************************************************
- */
-
-unsigned int ds1302ramRead (const int addr)
-{
- return ds1302regRead (0xC1 | ((addr & 0x1F) << 1)) ;
-}
-
-void ds1302ramWrite (const int addr, const unsigned int data)
-{
- ds1302regWrite ( 0xC0 | ((addr & 0x1F) << 1), data) ;
-}
-
-/*
- * ds1302clockRead:
- * Read all 8 bytes of the clock in a single operation
- *********************************************************************************
- */
-
-void ds1302clockRead (int clockData [8])
-{
- int i ;
- unsigned int regVal = 0x81 | ((RTC_BM & 0x1F) << 1) ;
-
- digitalWrite (sPin, HIGH) ; delayMicroseconds (1) ;
-
- dsShiftOut (regVal) ;
- for (i = 0 ; i < 8 ; ++i)
- clockData [i] = dsShiftIn () ;
-
- digitalWrite (sPin, LOW) ; delayMicroseconds (1) ;
-}
-
-
-/*
- * ds1302clockWrite:
- * Write all 8 bytes of the clock in a single operation
- *********************************************************************************
- */
-
-void ds1302clockWrite (const int clockData [8])
-{
- int i ;
- unsigned int regVal = 0x80 | ((RTC_BM & 0x1F) << 1) ;
-
- digitalWrite (sPin, HIGH) ; delayMicroseconds (1) ;
-
- dsShiftOut (regVal) ;
- for (i = 0 ; i < 8 ; ++i)
- dsShiftOut (clockData [i]) ;
-
- digitalWrite (sPin, LOW) ; delayMicroseconds (1) ;
-}
-
-
-/*
- * ds1302trickleCharge:
- * Set the bits on the trickle charger.
- * Probably best left alone...
- *********************************************************************************
- */
-
-void ds1302trickleCharge (const int diodes, const int resistors)
-{
- if (diodes + resistors == 0)
- ds1302rtcWrite (RTC_TC, 0x5C) ; // Disabled
- else
- ds1302rtcWrite (RTC_TC, 0xA0 | ((diodes & 3) << 2) | (resistors & 3)) ;
-}
-
-
-
-
-/*
- * ds1302setup:
- * Initialise the chip & remember the pins we're using
- *********************************************************************************
- */
-
-void ds1302setup (const int clockPin, const int dataPin, const int csPin)
-{
- dPin = dataPin ;
- cPin = clockPin ;
- sPin = csPin ;
-
- digitalWrite (dPin, LOW) ;
- digitalWrite (cPin, LOW) ;
- digitalWrite (sPin, LOW) ;
-
- pinMode (dPin, OUTPUT) ;
- pinMode (cPin, OUTPUT) ;
- pinMode (sPin, OUTPUT) ;
-
- ds1302rtcWrite (RTC_WP, 0) ; // Remove write-protect
-}
diff --git a/WiringPi/devLib/ds1302.h b/WiringPi/devLib/ds1302.h
deleted file mode 100644
index e82b3ed..0000000
--- a/WiringPi/devLib/ds1302.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * ds1302.h:
- * Real Time clock
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern unsigned int ds1302rtcRead (const int reg) ;
-extern void ds1302rtcWrite (const int reg, const unsigned int data) ;
-
-extern unsigned int ds1302ramRead (const int addr) ;
-extern void ds1302ramWrite (const int addr, const unsigned int data) ;
-
-extern void ds1302clockRead (int clockData [8]) ;
-extern void ds1302clockWrite (const int clockData [8]) ;
-
-extern void ds1302trickleCharge (const int diodes, const int resistors) ;
-
-extern void ds1302setup (const int clockPin, const int dataPin, const int csPin) ;
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/WiringPi/devLib/font.h b/WiringPi/devLib/font.h
deleted file mode 100644
index ce99e16..0000000
--- a/WiringPi/devLib/font.h
+++ /dev/null
@@ -1,2577 +0,0 @@
-/**********************************************/
-/* */
-/* Font file generated by cpi2fnt */
-/* ------------------------------ */
-/* Combined with the alpha-numeric */
-/* portion of Greg Harp's old PEARL */
-/* font (from earlier versions of */
-/* linux-m86k) by John Shifflett */
-/* */
-/**********************************************/
-
-static const int fontHeight = 8 ;
-static const int fontWidth = 8 ;
-
-static unsigned char font [] =
-{
- /* 0 0x00 '^@' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 1 0x01 '^A' */
- 0x7e, /* 01111110 */
- 0x81, /* 10000001 */
- 0xa5, /* 10100101 */
- 0x81, /* 10000001 */
- 0xbd, /* 10111101 */
- 0x99, /* 10011001 */
- 0x81, /* 10000001 */
- 0x7e, /* 01111110 */
-
- /* 2 0x02 '^B' */
- 0x7e, /* 01111110 */
- 0xff, /* 11111111 */
- 0xdb, /* 11011011 */
- 0xff, /* 11111111 */
- 0xc3, /* 11000011 */
- 0xe7, /* 11100111 */
- 0xff, /* 11111111 */
- 0x7e, /* 01111110 */
-
- /* 3 0x03 '^C' */
- 0x6c, /* 01101100 */
- 0xfe, /* 11111110 */
- 0xfe, /* 11111110 */
- 0xfe, /* 11111110 */
- 0x7c, /* 01111100 */
- 0x38, /* 00111000 */
- 0x10, /* 00010000 */
- 0x00, /* 00000000 */
-
- /* 4 0x04 '^D' */
- 0x10, /* 00010000 */
- 0x38, /* 00111000 */
- 0x7c, /* 01111100 */
- 0xfe, /* 11111110 */
- 0x7c, /* 01111100 */
- 0x38, /* 00111000 */
- 0x10, /* 00010000 */
- 0x00, /* 00000000 */
-
- /* 5 0x05 '^E' */
- 0x38, /* 00111000 */
- 0x7c, /* 01111100 */
- 0x38, /* 00111000 */
- 0xfe, /* 11111110 */
- 0xfe, /* 11111110 */
- 0xd6, /* 11010110 */
- 0x10, /* 00010000 */
- 0x38, /* 00111000 */
-
- /* 6 0x06 '^F' */
- 0x10, /* 00010000 */
- 0x38, /* 00111000 */
- 0x7c, /* 01111100 */
- 0xfe, /* 11111110 */
- 0xfe, /* 11111110 */
- 0x7c, /* 01111100 */
- 0x10, /* 00010000 */
- 0x38, /* 00111000 */
-
- /* 7 0x07 '^G' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 8 0x08 '^H' */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xe7, /* 11100111 */
- 0xc3, /* 11000011 */
- 0xc3, /* 11000011 */
- 0xe7, /* 11100111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
-
- /* 9 0x09 '^I' */
- 0x00, /* 00000000 */
- 0x3c, /* 00111100 */
- 0x66, /* 01100110 */
- 0x42, /* 01000010 */
- 0x42, /* 01000010 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
-
- /* 10 0x0a '^J' */
- 0xff, /* 11111111 */
- 0xc3, /* 11000011 */
- 0x99, /* 10011001 */
- 0xbd, /* 10111101 */
- 0xbd, /* 10111101 */
- 0x99, /* 10011001 */
- 0xc3, /* 11000011 */
- 0xff, /* 11111111 */
-
- /* 11 0x0b '^K' */
- 0x0f, /* 00001111 */
- 0x07, /* 00000111 */
- 0x0f, /* 00001111 */
- 0x7d, /* 01111101 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0x78, /* 01111000 */
-
- /* 12 0x0c '^L' */
- 0x3c, /* 00111100 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
-
- /* 13 0x0d '^M' */
- 0x3f, /* 00111111 */
- 0x33, /* 00110011 */
- 0x3f, /* 00111111 */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x70, /* 01110000 */
- 0xf0, /* 11110000 */
- 0xe0, /* 11100000 */
-
- /* 14 0x0e '^N' */
- 0x7f, /* 01111111 */
- 0x63, /* 01100011 */
- 0x7f, /* 01111111 */
- 0x63, /* 01100011 */
- 0x63, /* 01100011 */
- 0x67, /* 01100111 */
- 0xe6, /* 11100110 */
- 0xc0, /* 11000000 */
-
- /* 15 0x0f '^O' */
- 0x18, /* 00011000 */
- 0xdb, /* 11011011 */
- 0x3c, /* 00111100 */
- 0xe7, /* 11100111 */
- 0xe7, /* 11100111 */
- 0x3c, /* 00111100 */
- 0xdb, /* 11011011 */
- 0x18, /* 00011000 */
-
- /* 16 0x10 '^P' */
- 0x80, /* 10000000 */
- 0xe0, /* 11100000 */
- 0xf8, /* 11111000 */
- 0xfe, /* 11111110 */
- 0xf8, /* 11111000 */
- 0xe0, /* 11100000 */
- 0x80, /* 10000000 */
- 0x00, /* 00000000 */
-
- /* 17 0x11 '^Q' */
- 0x02, /* 00000010 */
- 0x0e, /* 00001110 */
- 0x3e, /* 00111110 */
- 0xfe, /* 11111110 */
- 0x3e, /* 00111110 */
- 0x0e, /* 00001110 */
- 0x02, /* 00000010 */
- 0x00, /* 00000000 */
-
- /* 18 0x12 '^R' */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
-
- /* 19 0x13 '^S' */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x00, /* 00000000 */
- 0x66, /* 01100110 */
- 0x00, /* 00000000 */
-
- /* 20 0x14 '^T' */
- 0x7f, /* 01111111 */
- 0xdb, /* 11011011 */
- 0xdb, /* 11011011 */
- 0x7b, /* 01111011 */
- 0x1b, /* 00011011 */
- 0x1b, /* 00011011 */
- 0x1b, /* 00011011 */
- 0x00, /* 00000000 */
-
- /* 21 0x15 '^U' */
- 0x3e, /* 00111110 */
- 0x61, /* 01100001 */
- 0x3c, /* 00111100 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x86, /* 10000110 */
- 0x7c, /* 01111100 */
-
- /* 22 0x16 '^V' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x7e, /* 01111110 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
-
- /* 23 0x17 '^W' */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0xff, /* 11111111 */
-
- /* 24 0x18 '^X' */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 25 0x19 '^Y' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 26 0x1a '^Z' */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0xfe, /* 11111110 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 27 0x1b '^[' */
- 0x00, /* 00000000 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
- 0xfe, /* 11111110 */
- 0x60, /* 01100000 */
- 0x30, /* 00110000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 28 0x1c '^\' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 29 0x1d '^]' */
- 0x00, /* 00000000 */
- 0x24, /* 00100100 */
- 0x66, /* 01100110 */
- 0xff, /* 11111111 */
- 0x66, /* 01100110 */
- 0x24, /* 00100100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 30 0x1e '^^' */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x7e, /* 01111110 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 31 0x1f '^_' */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0x7e, /* 01111110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 32 0x20 ' ' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 33 0x21 '!' */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x3c, /* 00111100 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 34 0x22 '"' */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 35 0x23 '#' */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0xfe, /* 11111110 */
- 0x6c, /* 01101100 */
- 0xfe, /* 11111110 */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0x00, /* 00000000 */
-
- /* 36 0x24 '$' */
- 0x18, /* 00011000 */
- 0x3e, /* 00111110 */
- 0x60, /* 01100000 */
- 0x3c, /* 00111100 */
- 0x06, /* 00000110 */
- 0x7c, /* 01111100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 37 0x25 '%' */
- 0x00, /* 00000000 */
- 0xc6, /* 11000110 */
- 0xcc, /* 11001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x66, /* 01100110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 38 0x26 '&' */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0x68, /* 01101000 */
- 0x76, /* 01110110 */
- 0xdc, /* 11011100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 39 0x27 ''' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 40 0x28 '(' */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x00, /* 00000000 */
-
- /* 41 0x29 ')' */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x00, /* 00000000 */
-
- /* 42 0x2a '*' */
- 0x00, /* 00000000 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0xff, /* 11111111 */
- 0x3c, /* 00111100 */
- 0x66, /* 01100110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 43 0x2b '+' */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 44 0x2c ',' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
-
- /* 45 0x2d '-' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 46 0x2e '.' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 47 0x2f '/' */
- 0x03, /* 00000011 */
- 0x06, /* 00000110 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
- 0xc0, /* 11000000 */
- 0x00, /* 00000000 */
-
- /* 48 0x30 '0' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xde, /* 11011110 */
- 0xfe, /* 11111110 */
- 0xf6, /* 11110110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 49 0x31 '1' */
- 0x18, /* 00011000 */
- 0x78, /* 01111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 50 0x32 '2' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
-
- /* 51 0x33 '3' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0x06, /* 00000110 */
- 0x1c, /* 00011100 */
- 0x06, /* 00000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 52 0x34 '4' */
- 0x1c, /* 00011100 */
- 0x3c, /* 00111100 */
- 0x6c, /* 01101100 */
- 0xcc, /* 11001100 */
- 0xfe, /* 11111110 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0x00, /* 00000000 */
-
- /* 53 0x35 '5' */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0xfc, /* 11111100 */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 54 0x36 '6' */
- 0x38, /* 00111000 */
- 0x60, /* 01100000 */
- 0xc0, /* 11000000 */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 55 0x37 '7' */
- 0xfe, /* 11111110 */
- 0x06, /* 00000110 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
- 0x60, /* 01100000 */
- 0x00, /* 00000000 */
-
- /* 56 0x38 '8' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 57 0x39 '9' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7e, /* 01111110 */
- 0x06, /* 00000110 */
- 0x0c, /* 00001100 */
- 0x38, /* 00111000 */
- 0x00, /* 00000000 */
-
- /* 58 0x3a ':' */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 59 0x3b ';' */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
-
- /* 60 0x3c '<' */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x00, /* 00000000 */
-
- /* 61 0x3d '=' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 62 0x3e '>' */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x06, /* 00000110 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x00, /* 00000000 */
-
- /* 63 0x3f '?' */
- 0x3c, /* 00111100 */
- 0x66, /* 01100110 */
- 0x06, /* 00000110 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 64 0x40 '@' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xde, /* 11011110 */
- 0xde, /* 11011110 */
- 0xde, /* 11011110 */
- 0xc0, /* 11000000 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 65 0x41 'A' */
- 0x10, /* 00010000 */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 66 0x42 'B' */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfc, /* 11111100 */
- 0x00, /* 00000000 */
-
- /* 67 0x43 'C' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 68 0x44 'D' */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfc, /* 11111100 */
- 0x00, /* 00000000 */
-
- /* 69 0x45 'E' */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xf8, /* 11111000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
-
- /* 70 0x46 'F' */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xf8, /* 11111000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0x00, /* 00000000 */
-
- /* 71 0x47 'G' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc0, /* 11000000 */
- 0xce, /* 11001110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 72 0x48 'H' */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 73 0x49 'I' */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
-
- /* 74 0x4a 'J' */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 75 0x4b 'K' */
- 0xc6, /* 11000110 */
- 0xcc, /* 11001100 */
- 0xd8, /* 11011000 */
- 0xf0, /* 11110000 */
- 0xd8, /* 11011000 */
- 0xcc, /* 11001100 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 76 0x4c 'L' */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
-
- /* 77 0x4d 'M' */
- 0x82, /* 10000010 */
- 0xc6, /* 11000110 */
- 0xee, /* 11101110 */
- 0xfe, /* 11111110 */
- 0xd6, /* 11010110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 78 0x4e 'N' */
- 0xc6, /* 11000110 */
- 0xe6, /* 11100110 */
- 0xf6, /* 11110110 */
- 0xde, /* 11011110 */
- 0xce, /* 11001110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 79 0x4f 'O' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 80 0x50 'P' */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfc, /* 11111100 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0x00, /* 00000000 */
-
- /* 81 0x51 'Q' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xf6, /* 11110110 */
- 0xde, /* 11011110 */
- 0x7c, /* 01111100 */
- 0x06, /* 00000110 */
-
- /* 82 0x52 'R' */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfc, /* 11111100 */
- 0xd8, /* 11011000 */
- 0xcc, /* 11001100 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 83 0x53 'S' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0x60, /* 01100000 */
- 0x38, /* 00111000 */
- 0x0c, /* 00001100 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 84 0x54 'T' */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 85 0x55 'U' */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 86 0x56 'V' */
- 0xc3, /* 11000011 */
- 0xc3, /* 11000011 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 87 0x57 'W' */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xd6, /* 11010110 */
- 0xfe, /* 11111110 */
- 0xee, /* 11101110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 88 0x58 'X' */
- 0xc3, /* 11000011 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x66, /* 01100110 */
- 0xc3, /* 11000011 */
- 0x00, /* 00000000 */
-
- /* 89 0x59 'Y' */
- 0xc3, /* 11000011 */
- 0xc3, /* 11000011 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 90 0x5a 'Z' */
- 0xfe, /* 11111110 */
- 0x06, /* 00000110 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
-
- /* 91 0x5b '[' */
- 0x3c, /* 00111100 */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
-
- /* 92 0x5c '\' */
- 0xc0, /* 11000000 */
- 0x60, /* 01100000 */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x06, /* 00000110 */
- 0x03, /* 00000011 */
- 0x00, /* 00000000 */
-
- /* 93 0x5d ']' */
- 0x3c, /* 00111100 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
-
- /* 94 0x5e '^' */
- 0x10, /* 00010000 */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 95 0x5f '_' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
-
- /* 96 0x60 '`' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 97 0x61 'a' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7c, /* 01111100 */
- 0x06, /* 00000110 */
- 0x7e, /* 01111110 */
- 0xc6, /* 11000110 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
-
- /* 98 0x62 'b' */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfc, /* 11111100 */
- 0x00, /* 00000000 */
-
- /* 99 0x63 'c' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc0, /* 11000000 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 100 0x64 'd' */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0x7e, /* 01111110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
-
- /* 101 0x65 'e' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 102 0x66 'f' */
- 0x3c, /* 00111100 */
- 0x66, /* 01100110 */
- 0x60, /* 01100000 */
- 0xf0, /* 11110000 */
- 0x60, /* 01100000 */
- 0x60, /* 01100000 */
- 0x60, /* 01100000 */
- 0x00, /* 00000000 */
-
- /* 103 0x67 'g' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7e, /* 01111110 */
- 0x06, /* 00000110 */
- 0x7c, /* 01111100 */
-
- /* 104 0x68 'h' */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 105 0x69 'i' */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x38, /* 00111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 106 0x6a 'j' */
- 0x06, /* 00000110 */
- 0x00, /* 00000000 */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
-
- /* 107 0x6b 'k' */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xcc, /* 11001100 */
- 0xd8, /* 11011000 */
- 0xf0, /* 11110000 */
- 0xd8, /* 11011000 */
- 0xcc, /* 11001100 */
- 0x00, /* 00000000 */
-
- /* 108 0x6c 'l' */
- 0x38, /* 00111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 109 0x6d 'm' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xec, /* 11101100 */
- 0xfe, /* 11111110 */
- 0xd6, /* 11010110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 110 0x6e 'n' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 111 0x6f 'o' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 112 0x70 'p' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfc, /* 11111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfc, /* 11111100 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
-
- /* 113 0x71 'q' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7e, /* 01111110 */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
-
- /* 114 0x72 'r' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xdc, /* 11011100 */
- 0xe6, /* 11100110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0x00, /* 00000000 */
-
- /* 115 0x73 's' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0xc0, /* 11000000 */
- 0x7c, /* 01111100 */
- 0x06, /* 00000110 */
- 0xfc, /* 11111100 */
- 0x00, /* 00000000 */
-
- /* 116 0x74 't' */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x7c, /* 01111100 */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x36, /* 00110110 */
- 0x1c, /* 00011100 */
- 0x00, /* 00000000 */
-
- /* 117 0x75 'u' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 118 0x76 'v' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x6c, /* 01101100 */
- 0x38, /* 00111000 */
- 0x00, /* 00000000 */
-
- /* 119 0x77 'w' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xd6, /* 11010110 */
- 0xfe, /* 11111110 */
- 0x6c, /* 01101100 */
- 0x00, /* 00000000 */
-
- /* 120 0x78 'x' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xc6, /* 11000110 */
- 0x6c, /* 01101100 */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 121 0x79 'y' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xc3, /* 11000011 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
-
- /* 122 0x7a 'z' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0x0c, /* 00001100 */
- 0x38, /* 00111000 */
- 0x60, /* 01100000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
-
- /* 123 0x7b '{' */
- 0x0e, /* 00001110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x70, /* 01110000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x0e, /* 00001110 */
- 0x00, /* 00000000 */
-
- /* 124 0x7c '|' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 125 0x7d '}' */
- 0x70, /* 01110000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x0e, /* 00001110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x70, /* 01110000 */
- 0x00, /* 00000000 */
-
- /* 126 0x7e '~' */
- 0x72, /* 01110010 */
- 0x9c, /* 10011100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 127 0x7f '' */
- 0x00, /* 00000000 */
- 0x10, /* 00010000 */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
-
- /* 128 0x80 '' */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x0c, /* 00001100 */
- 0x78, /* 01111000 */
-
- /* 129 0x81 '' */
- 0xcc, /* 11001100 */
- 0x00, /* 00000000 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 130 0x82 '' */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 131 0x83 '' */
- 0x7c, /* 01111100 */
- 0x82, /* 10000010 */
- 0x78, /* 01111000 */
- 0x0c, /* 00001100 */
- 0x7c, /* 01111100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 132 0x84 '' */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
- 0x78, /* 01111000 */
- 0x0c, /* 00001100 */
- 0x7c, /* 01111100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 133 0x85 '' */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x78, /* 01111000 */
- 0x0c, /* 00001100 */
- 0x7c, /* 01111100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 134 0x86 '' */
- 0x30, /* 00110000 */
- 0x30, /* 00110000 */
- 0x78, /* 01111000 */
- 0x0c, /* 00001100 */
- 0x7c, /* 01111100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 135 0x87 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0x7e, /* 01111110 */
- 0x0c, /* 00001100 */
- 0x38, /* 00111000 */
-
- /* 136 0x88 '' */
- 0x7c, /* 01111100 */
- 0x82, /* 10000010 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 137 0x89 '' */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 138 0x8a '' */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 139 0x8b '' */
- 0x66, /* 01100110 */
- 0x00, /* 00000000 */
- 0x38, /* 00111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
-
- /* 140 0x8c '' */
- 0x7c, /* 01111100 */
- 0x82, /* 10000010 */
- 0x38, /* 00111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
-
- /* 141 0x8d '' */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x38, /* 00111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
-
- /* 142 0x8e '' */
- 0xc6, /* 11000110 */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 143 0x8f '' */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 144 0x90 '' */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0xf8, /* 11111000 */
- 0xc0, /* 11000000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
-
- /* 145 0x91 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0xd8, /* 11011000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
-
- /* 146 0x92 '' */
- 0x3e, /* 00111110 */
- 0x6c, /* 01101100 */
- 0xcc, /* 11001100 */
- 0xfe, /* 11111110 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xce, /* 11001110 */
- 0x00, /* 00000000 */
-
- /* 147 0x93 '' */
- 0x7c, /* 01111100 */
- 0x82, /* 10000010 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 148 0x94 '' */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 149 0x95 '' */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 150 0x96 '' */
- 0x78, /* 01111000 */
- 0x84, /* 10000100 */
- 0x00, /* 00000000 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 151 0x97 '' */
- 0x60, /* 01100000 */
- 0x30, /* 00110000 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 152 0x98 '' */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7e, /* 01111110 */
- 0x06, /* 00000110 */
- 0xfc, /* 11111100 */
-
- /* 153 0x99 '' */
- 0xc6, /* 11000110 */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x6c, /* 01101100 */
- 0x38, /* 00111000 */
- 0x00, /* 00000000 */
-
- /* 154 0x9a '' */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 155 0x9b '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 156 0x9c '' */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0x64, /* 01100100 */
- 0xf0, /* 11110000 */
- 0x60, /* 01100000 */
- 0x66, /* 01100110 */
- 0xfc, /* 11111100 */
- 0x00, /* 00000000 */
-
- /* 157 0x9d '' */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 158 0x9e '' */
- 0xf8, /* 11111000 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xfa, /* 11111010 */
- 0xc6, /* 11000110 */
- 0xcf, /* 11001111 */
- 0xc6, /* 11000110 */
- 0xc7, /* 11000111 */
-
- /* 159 0x9f '' */
- 0x0e, /* 00001110 */
- 0x1b, /* 00011011 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0xd8, /* 11011000 */
- 0x70, /* 01110000 */
- 0x00, /* 00000000 */
-
- /* 160 0xa0 '' */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x78, /* 01111000 */
- 0x0c, /* 00001100 */
- 0x7c, /* 01111100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 161 0xa1 '' */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x38, /* 00111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
-
- /* 162 0xa2 '' */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
-
- /* 163 0xa3 '' */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 164 0xa4 '' */
- 0x76, /* 01110110 */
- 0xdc, /* 11011100 */
- 0x00, /* 00000000 */
- 0xdc, /* 11011100 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x00, /* 00000000 */
-
- /* 165 0xa5 '' */
- 0x76, /* 01110110 */
- 0xdc, /* 11011100 */
- 0x00, /* 00000000 */
- 0xe6, /* 11100110 */
- 0xf6, /* 11110110 */
- 0xde, /* 11011110 */
- 0xce, /* 11001110 */
- 0x00, /* 00000000 */
-
- /* 166 0xa6 '' */
- 0x3c, /* 00111100 */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0x3e, /* 00111110 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 167 0xa7 '' */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0x38, /* 00111000 */
- 0x00, /* 00000000 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 168 0xa8 '' */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x63, /* 01100011 */
- 0x3e, /* 00111110 */
- 0x00, /* 00000000 */
-
- /* 169 0xa9 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 170 0xaa '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0x06, /* 00000110 */
- 0x06, /* 00000110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 171 0xab '' */
- 0x63, /* 01100011 */
- 0xe6, /* 11100110 */
- 0x6c, /* 01101100 */
- 0x7e, /* 01111110 */
- 0x33, /* 00110011 */
- 0x66, /* 01100110 */
- 0xcc, /* 11001100 */
- 0x0f, /* 00001111 */
-
- /* 172 0xac '' */
- 0x63, /* 01100011 */
- 0xe6, /* 11100110 */
- 0x6c, /* 01101100 */
- 0x7a, /* 01111010 */
- 0x36, /* 00110110 */
- 0x6a, /* 01101010 */
- 0xdf, /* 11011111 */
- 0x06, /* 00000110 */
-
- /* 173 0xad '' */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 174 0xae '' */
- 0x00, /* 00000000 */
- 0x33, /* 00110011 */
- 0x66, /* 01100110 */
- 0xcc, /* 11001100 */
- 0x66, /* 01100110 */
- 0x33, /* 00110011 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 175 0xaf '' */
- 0x00, /* 00000000 */
- 0xcc, /* 11001100 */
- 0x66, /* 01100110 */
- 0x33, /* 00110011 */
- 0x66, /* 01100110 */
- 0xcc, /* 11001100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 176 0xb0 '' */
- 0x22, /* 00100010 */
- 0x88, /* 10001000 */
- 0x22, /* 00100010 */
- 0x88, /* 10001000 */
- 0x22, /* 00100010 */
- 0x88, /* 10001000 */
- 0x22, /* 00100010 */
- 0x88, /* 10001000 */
-
- /* 177 0xb1 '' */
- 0x55, /* 01010101 */
- 0xaa, /* 10101010 */
- 0x55, /* 01010101 */
- 0xaa, /* 10101010 */
- 0x55, /* 01010101 */
- 0xaa, /* 10101010 */
- 0x55, /* 01010101 */
- 0xaa, /* 10101010 */
-
- /* 178 0xb2 '' */
- 0x77, /* 01110111 */
- 0xdd, /* 11011101 */
- 0x77, /* 01110111 */
- 0xdd, /* 11011101 */
- 0x77, /* 01110111 */
- 0xdd, /* 11011101 */
- 0x77, /* 01110111 */
- 0xdd, /* 11011101 */
-
- /* 179 0xb3 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 180 0xb4 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xf8, /* 11111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 181 0xb5 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xf8, /* 11111000 */
- 0x18, /* 00011000 */
- 0xf8, /* 11111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 182 0xb6 '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0xf6, /* 11110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 183 0xb7 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 184 0xb8 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xf8, /* 11111000 */
- 0x18, /* 00011000 */
- 0xf8, /* 11111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 185 0xb9 '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0xf6, /* 11110110 */
- 0x06, /* 00000110 */
- 0xf6, /* 11110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 186 0xba '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 187 0xbb '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0x06, /* 00000110 */
- 0xf6, /* 11110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 188 0xbc '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0xf6, /* 11110110 */
- 0x06, /* 00000110 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 189 0xbd '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 190 0xbe '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xf8, /* 11111000 */
- 0x18, /* 00011000 */
- 0xf8, /* 11111000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 191 0xbf '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xf8, /* 11111000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 192 0xc0 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x1f, /* 00011111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 193 0xc1 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 194 0xc2 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 195 0xc3 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x1f, /* 00011111 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 196 0xc4 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 197 0xc5 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xff, /* 11111111 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 198 0xc6 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x1f, /* 00011111 */
- 0x18, /* 00011000 */
- 0x1f, /* 00011111 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 199 0xc7 '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x37, /* 00110111 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 200 0xc8 '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x37, /* 00110111 */
- 0x30, /* 00110000 */
- 0x3f, /* 00111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 201 0xc9 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x3f, /* 00111111 */
- 0x30, /* 00110000 */
- 0x37, /* 00110111 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 202 0xca '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0xf7, /* 11110111 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 203 0xcb '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0xf7, /* 11110111 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 204 0xcc '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x37, /* 00110111 */
- 0x30, /* 00110000 */
- 0x37, /* 00110111 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 205 0xcd '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 206 0xce '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0xf7, /* 11110111 */
- 0x00, /* 00000000 */
- 0xf7, /* 11110111 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 207 0xcf '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 208 0xd0 '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 209 0xd1 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 210 0xd2 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 211 0xd3 '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x3f, /* 00111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 212 0xd4 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x1f, /* 00011111 */
- 0x18, /* 00011000 */
- 0x1f, /* 00011111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 213 0xd5 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x1f, /* 00011111 */
- 0x18, /* 00011000 */
- 0x1f, /* 00011111 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 214 0xd6 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x3f, /* 00111111 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 215 0xd7 '' */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0xff, /* 11111111 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
-
- /* 216 0xd8 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xff, /* 11111111 */
- 0x18, /* 00011000 */
- 0xff, /* 11111111 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 217 0xd9 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xf8, /* 11111000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 218 0xda '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x1f, /* 00011111 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 219 0xdb '' */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
-
- /* 220 0xdc '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
-
- /* 221 0xdd '' */
- 0xf0, /* 11110000 */
- 0xf0, /* 11110000 */
- 0xf0, /* 11110000 */
- 0xf0, /* 11110000 */
- 0xf0, /* 11110000 */
- 0xf0, /* 11110000 */
- 0xf0, /* 11110000 */
- 0xf0, /* 11110000 */
-
- /* 222 0xde '' */
- 0x0f, /* 00001111 */
- 0x0f, /* 00001111 */
- 0x0f, /* 00001111 */
- 0x0f, /* 00001111 */
- 0x0f, /* 00001111 */
- 0x0f, /* 00001111 */
- 0x0f, /* 00001111 */
- 0x0f, /* 00001111 */
-
- /* 223 0xdf '' */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0xff, /* 11111111 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 224 0xe0 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x76, /* 01110110 */
- 0xdc, /* 11011100 */
- 0xc8, /* 11001000 */
- 0xdc, /* 11011100 */
- 0x76, /* 01110110 */
- 0x00, /* 00000000 */
-
- /* 225 0xe1 '' */
- 0x78, /* 01111000 */
- 0xcc, /* 11001100 */
- 0xcc, /* 11001100 */
- 0xd8, /* 11011000 */
- 0xcc, /* 11001100 */
- 0xc6, /* 11000110 */
- 0xcc, /* 11001100 */
- 0x00, /* 00000000 */
-
- /* 226 0xe2 '' */
- 0xfe, /* 11111110 */
- 0xc6, /* 11000110 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0xc0, /* 11000000 */
- 0x00, /* 00000000 */
-
- /* 227 0xe3 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0x00, /* 00000000 */
-
- /* 228 0xe4 '' */
- 0xfe, /* 11111110 */
- 0xc6, /* 11000110 */
- 0x60, /* 01100000 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
-
- /* 229 0xe5 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0xd8, /* 11011000 */
- 0xd8, /* 11011000 */
- 0xd8, /* 11011000 */
- 0x70, /* 01110000 */
- 0x00, /* 00000000 */
-
- /* 230 0xe6 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x7c, /* 01111100 */
- 0xc0, /* 11000000 */
-
- /* 231 0xe7 '' */
- 0x00, /* 00000000 */
- 0x76, /* 01110110 */
- 0xdc, /* 11011100 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
-
- /* 232 0xe8 '' */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x3c, /* 00111100 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
-
- /* 233 0xe9 '' */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0xc6, /* 11000110 */
- 0xfe, /* 11111110 */
- 0xc6, /* 11000110 */
- 0x6c, /* 01101100 */
- 0x38, /* 00111000 */
- 0x00, /* 00000000 */
-
- /* 234 0xea '' */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0xee, /* 11101110 */
- 0x00, /* 00000000 */
-
- /* 235 0xeb '' */
- 0x0e, /* 00001110 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x3e, /* 00111110 */
- 0x66, /* 01100110 */
- 0x66, /* 01100110 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
-
- /* 236 0xec '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0xdb, /* 11011011 */
- 0xdb, /* 11011011 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 237 0xed '' */
- 0x06, /* 00000110 */
- 0x0c, /* 00001100 */
- 0x7e, /* 01111110 */
- 0xdb, /* 11011011 */
- 0xdb, /* 11011011 */
- 0x7e, /* 01111110 */
- 0x60, /* 01100000 */
- 0xc0, /* 11000000 */
-
- /* 238 0xee '' */
- 0x1e, /* 00011110 */
- 0x30, /* 00110000 */
- 0x60, /* 01100000 */
- 0x7e, /* 01111110 */
- 0x60, /* 01100000 */
- 0x30, /* 00110000 */
- 0x1e, /* 00011110 */
- 0x00, /* 00000000 */
-
- /* 239 0xef '' */
- 0x00, /* 00000000 */
- 0x7c, /* 01111100 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0xc6, /* 11000110 */
- 0x00, /* 00000000 */
-
- /* 240 0xf0 '' */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
- 0xfe, /* 11111110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 241 0xf1 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x7e, /* 01111110 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
-
- /* 242 0xf2 '' */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
-
- /* 243 0xf3 '' */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x18, /* 00011000 */
- 0x0c, /* 00001100 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
-
- /* 244 0xf4 '' */
- 0x0e, /* 00001110 */
- 0x1b, /* 00011011 */
- 0x1b, /* 00011011 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
-
- /* 245 0xf5 '' */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0xd8, /* 11011000 */
- 0xd8, /* 11011000 */
- 0x70, /* 01110000 */
-
- /* 246 0xf6 '' */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x7e, /* 01111110 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 247 0xf7 '' */
- 0x00, /* 00000000 */
- 0x76, /* 01110110 */
- 0xdc, /* 11011100 */
- 0x00, /* 00000000 */
- 0x76, /* 01110110 */
- 0xdc, /* 11011100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 248 0xf8 '' */
- 0x38, /* 00111000 */
- 0x6c, /* 01101100 */
- 0x6c, /* 01101100 */
- 0x38, /* 00111000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 249 0xf9 '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 250 0xfa '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x18, /* 00011000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 251 0xfb '' */
- 0x0f, /* 00001111 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0x0c, /* 00001100 */
- 0xec, /* 11101100 */
- 0x6c, /* 01101100 */
- 0x3c, /* 00111100 */
- 0x1c, /* 00011100 */
-
- /* 252 0xfc '' */
- 0x6c, /* 01101100 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x36, /* 00110110 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 253 0xfd '' */
- 0x78, /* 01111000 */
- 0x0c, /* 00001100 */
- 0x18, /* 00011000 */
- 0x30, /* 00110000 */
- 0x7c, /* 01111100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 254 0xfe '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x3c, /* 00111100 */
- 0x3c, /* 00111100 */
- 0x3c, /* 00111100 */
- 0x3c, /* 00111100 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
- /* 255 0xff '' */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
- 0x00, /* 00000000 */
-
-};
diff --git a/WiringPi/devLib/gertboard.c b/WiringPi/devLib/gertboard.c
deleted file mode 100644
index 5aeaef7..0000000
--- a/WiringPi/devLib/gertboard.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * gertboard.c:
- * Access routines for the SPI devices on the Gertboard
- * Copyright (c) 2012 Gordon Henderson
- *
- * The Gertboard has:
- *
- * An MCP3002 dual-channel A to D convertor connected
- * to the SPI bus, selected by chip-select A, and:
- *
- * An MCP4802 dual-channel D to A convertor connected
- * to the SPI bus, selected via chip-select B.
- *
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation, either version 3 of the
- * License, or (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with wiringPi.
- * If not, see .
- ***********************************************************************
- */
-
-
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-
-#include "gertboard.h"
-
-// The A-D convertor won't run at more than 1MHz @ 3.3v
-
-#define SPI_ADC_SPEED 1000000
-#define SPI_DAC_SPEED 1000000
-#define SPI_A2D 0
-#define SPI_D2A 1
-
-
-/*
- * gertboardAnalogWrite:
- * Write an 8-bit data value to the MCP4802 Analog to digital
- * convertor on the Gertboard.
- *********************************************************************************
- */
-
-void gertboardAnalogWrite (const int chan, const int value)
-{
- uint8_t spiData [2] ;
- uint8_t chanBits, dataBits ;
-
- if (chan == 0)
- chanBits = 0x30 ;
- else
- chanBits = 0xB0 ;
-
- chanBits |= ((value >> 4) & 0x0F) ;
- dataBits = ((value << 4) & 0xF0) ;
-
- spiData [0] = chanBits ;
- spiData [1] = dataBits ;
-
- wiringPiSPIDataRW (SPI_D2A, spiData, 2) ;
-}
-
-
-/*
- * gertboardAnalogRead:
- * Return the analog value of the given channel (0/1).
- * The A/D is a 10-bit device
- *********************************************************************************
- */
-
-int gertboardAnalogRead (const int chan)
-{
- uint8_t spiData [2] ;
-
- uint8_t chanBits ;
-
- if (chan == 0)
- chanBits = 0b11010000 ;
- else
- chanBits = 0b11110000 ;
-
- spiData [0] = chanBits ;
- spiData [1] = 0 ;
-
- wiringPiSPIDataRW (SPI_A2D, spiData, 2) ;
-
- return ((spiData [0] << 7) | (spiData [1] >> 1)) & 0x3FF ;
-}
-
-
-/*
- * gertboardSPISetup:
- * Initialise the SPI bus, etc.
- *********************************************************************************
- */
-
-int gertboardSPISetup (void)
-{
- if (wiringPiSPISetup (SPI_A2D, SPI_ADC_SPEED) < 0)
- return -1 ;
-
- if (wiringPiSPISetup (SPI_D2A, SPI_DAC_SPEED) < 0)
- return -1 ;
-
- return 0 ;
-}
-
-
-/*
- * New wiringPi node extension methods.
- *********************************************************************************
- */
-
-static int myAnalogRead (struct wiringPiNodeStruct *node, const int chan)
-{
- return gertboardAnalogRead (chan - node->pinBase) ;
-}
-
-static void myAnalogWrite (struct wiringPiNodeStruct *node, const int chan, const int value)
-{
- gertboardAnalogWrite (chan - node->pinBase, value) ;
-}
-
-
-/*
- * gertboardAnalogSetup:
- * Create a new wiringPi device node for the analog devices on the
- * Gertboard. We create one node with 2 pins - each pin being read
- * and write - although the operations actually go to different
- * hardware devices.
- *********************************************************************************
- */
-
-int gertboardAnalogSetup (const int pinBase)
-{
- struct wiringPiNodeStruct *node ;
- int x ;
-
- if (( x = gertboardSPISetup ()) != 0)
- return x;
-
- node = wiringPiNewNode (pinBase, 2) ;
- node->analogRead = myAnalogRead ;
- node->analogWrite = myAnalogWrite ;
-
- return 0 ;
-}
diff --git a/WiringPi/devLib/gertboard.h b/WiringPi/devLib/gertboard.h
deleted file mode 100644
index 3fa1919..0000000
--- a/WiringPi/devLib/gertboard.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * gertboard.h:
- * Access routines for the SPI devices on the Gertboard
- * Copyright (c) 2012 Gordon Henderson
- *
- * The Gertboard has an MCP4802 dual-channel D to A convertor
- * connected to the SPI bus, selected via chip-select B.
- *
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation, either version 3 of the
- * License, or (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with wiringPi.
- * If not, see .
- ***********************************************************************
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// Old routines
-
-extern void gertboardAnalogWrite (const int chan, const int value) ;
-extern int gertboardAnalogRead (const int chan) ;
-extern int gertboardSPISetup (void) ;
-
-// New
-
-extern int gertboardAnalogSetup (const int pinBase) ;
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/WiringPi/devLib/lcd.c b/WiringPi/devLib/lcd.c
deleted file mode 100644
index 6c0e474..0000000
--- a/WiringPi/devLib/lcd.c
+++ /dev/null
@@ -1,495 +0,0 @@
-/*
- * lcd.c:
- * Text-based LCD driver.
- * This is designed to drive the parallel interface LCD drivers
- * based in the Hitachi HD44780U controller and compatables.
- *
- * Copyright (c) 2012 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-
-#include "lcd.h"
-
-#ifndef TRUE
-# define TRUE (1==1)
-# define FALSE (1==2)
-#endif
-
-// HD44780U Commands
-
-#define LCD_CLEAR 0x01
-#define LCD_HOME 0x02
-#define LCD_ENTRY 0x04
-#define LCD_CTRL 0x08
-#define LCD_CDSHIFT 0x10
-#define LCD_FUNC 0x20
-#define LCD_CGRAM 0x40
-#define LCD_DGRAM 0x80
-
-// Bits in the entry register
-
-#define LCD_ENTRY_SH 0x01
-#define LCD_ENTRY_ID 0x02
-
-// Bits in the control register
-
-#define LCD_BLINK_CTRL 0x01
-#define LCD_CURSOR_CTRL 0x02
-#define LCD_DISPLAY_CTRL 0x04
-
-// Bits in the function register
-
-#define LCD_FUNC_F 0x04
-#define LCD_FUNC_N 0x08
-#define LCD_FUNC_DL 0x10
-
-#define LCD_CDSHIFT_RL 0x04
-
-struct lcdDataStruct
-{
- int bits, rows, cols ;
- int rsPin, strbPin ;
- int dataPins [8] ;
- int cx, cy ;
-} ;
-
-struct lcdDataStruct *lcds [MAX_LCDS] ;
-
-static int lcdControl ;
-
-// Row offsets
-
-static const int rowOff [4] = { 0x00, 0x40, 0x14, 0x54 } ;
-
-
-/*
- * strobe:
- * Toggle the strobe (Really the "E") pin to the device.
- * According to the docs, data is latched on the falling edge.
- *********************************************************************************
- */
-
-static void strobe (const struct lcdDataStruct *lcd)
-{
-
-// Note timing changes for new version of delayMicroseconds ()
-
- digitalWrite (lcd->strbPin, 1) ; delayMicroseconds (50) ;
- digitalWrite (lcd->strbPin, 0) ; delayMicroseconds (50) ;
-}
-
-
-/*
- * sentDataCmd:
- * Send an data or command byte to the display.
- *********************************************************************************
- */
-
-static void sendDataCmd (const struct lcdDataStruct *lcd, unsigned char data)
-{
- register unsigned char myData = data ;
- unsigned char i, d4 ;
-
- if (lcd->bits == 4)
- {
- d4 = (myData >> 4) & 0x0F;
- for (i = 0 ; i < 4 ; ++i)
- {
- digitalWrite (lcd->dataPins [i], (d4 & 1)) ;
- d4 >>= 1 ;
- }
- strobe (lcd) ;
-
- d4 = myData & 0x0F ;
- for (i = 0 ; i < 4 ; ++i)
- {
- digitalWrite (lcd->dataPins [i], (d4 & 1)) ;
- d4 >>= 1 ;
- }
- }
- else
- {
- for (i = 0 ; i < 8 ; ++i)
- {
- digitalWrite (lcd->dataPins [i], (myData & 1)) ;
- myData >>= 1 ;
- }
- }
- strobe (lcd) ;
-}
-
-
-/*
- * putCommand:
- * Send a command byte to the display
- *********************************************************************************
- */
-
-static void putCommand (const struct lcdDataStruct *lcd, unsigned char command)
-{
- digitalWrite (lcd->rsPin, 0) ;
- sendDataCmd (lcd, command) ;
- delay (2) ;
-}
-
-static void put4Command (const struct lcdDataStruct *lcd, unsigned char command)
-{
- register unsigned char myCommand = command ;
- register unsigned char i ;
-
- digitalWrite (lcd->rsPin, 0) ;
-
- for (i = 0 ; i < 4 ; ++i)
- {
- digitalWrite (lcd->dataPins [i], (myCommand & 1)) ;
- myCommand >>= 1 ;
- }
- strobe (lcd) ;
-}
-
-
-/*
- *********************************************************************************
- * User Callable code below here
- *********************************************************************************
- */
-
-/*
- * lcdHome: lcdClear:
- * Home the cursor or clear the screen.
- *********************************************************************************
- */
-
-void lcdHome (const int fd)
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
-
- putCommand (lcd, LCD_HOME) ;
- lcd->cx = lcd->cy = 0 ;
- delay (5) ;
-}
-
-void lcdClear (const int fd)
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
-
- putCommand (lcd, LCD_CLEAR) ;
- putCommand (lcd, LCD_HOME) ;
- lcd->cx = lcd->cy = 0 ;
- delay (5) ;
-}
-
-
-/*
- * lcdDisplay: lcdCursor: lcdCursorBlink:
- * Turn the display, cursor, cursor blinking on/off
- *********************************************************************************
- */
-
-void lcdDisplay (const int fd, int state)
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
-
- if (state)
- lcdControl |= LCD_DISPLAY_CTRL ;
- else
- lcdControl &= ~LCD_DISPLAY_CTRL ;
-
- putCommand (lcd, LCD_CTRL | lcdControl) ;
-}
-
-void lcdCursor (const int fd, int state)
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
-
- if (state)
- lcdControl |= LCD_CURSOR_CTRL ;
- else
- lcdControl &= ~LCD_CURSOR_CTRL ;
-
- putCommand (lcd, LCD_CTRL | lcdControl) ;
-}
-
-void lcdCursorBlink (const int fd, int state)
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
-
- if (state)
- lcdControl |= LCD_BLINK_CTRL ;
- else
- lcdControl &= ~LCD_BLINK_CTRL ;
-
- putCommand (lcd, LCD_CTRL | lcdControl) ;
-}
-
-
-/*
- * lcdSendCommand:
- * Send any arbitary command to the display
- *********************************************************************************
- */
-
-void lcdSendCommand (const int fd, unsigned char command)
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
- putCommand (lcd, command) ;
-}
-
-
-/*
- * lcdPosition:
- * Update the position of the cursor on the display.
- * Ignore invalid locations.
- *********************************************************************************
- */
-
-void lcdPosition (const int fd, int x, int y)
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
-
- if ((x > lcd->cols) || (x < 0))
- return ;
- if ((y > lcd->rows) || (y < 0))
- return ;
-
- putCommand (lcd, x + (LCD_DGRAM | rowOff [y])) ;
-
- lcd->cx = x ;
- lcd->cy = y ;
-}
-
-
-/*
- * lcdCharDef:
- * Defines a new character in the CGRAM
- *********************************************************************************
- */
-
-void lcdCharDef (const int fd, int index, unsigned char data [8])
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
- int i ;
-
- putCommand (lcd, LCD_CGRAM | ((index & 7) << 3)) ;
-
- digitalWrite (lcd->rsPin, 1) ;
- for (i = 0 ; i < 8 ; ++i)
- sendDataCmd (lcd, data [i]) ;
-}
-
-
-/*
- * lcdPutchar:
- * Send a data byte to be displayed on the display. We implement a very
- * simple terminal here - with line wrapping, but no scrolling. Yet.
- *********************************************************************************
- */
-
-void lcdPutchar (const int fd, unsigned char data)
-{
- struct lcdDataStruct *lcd = lcds [fd] ;
-
- digitalWrite (lcd->rsPin, 1) ;
- sendDataCmd (lcd, data) ;
-
- if (++lcd->cx == lcd->cols)
- {
- lcd->cx = 0 ;
- if (++lcd->cy == lcd->rows)
- lcd->cy = 0 ;
-
- putCommand (lcd, lcd->cx + (LCD_DGRAM | rowOff [lcd->cy])) ;
- }
-}
-
-
-/*
- * lcdPuts:
- * Send a string to be displayed on the display
- *********************************************************************************
- */
-
-void lcdPuts (const int fd, const char *string)
-{
- while (*string)
- lcdPutchar (fd, *string++) ;
-}
-
-
-/*
- * lcdPrintf:
- * Printf to an LCD display
- *********************************************************************************
- */
-
-void lcdPrintf (const int fd, const char *message, ...)
-{
- va_list argp ;
- char buffer [1024] ;
-
- va_start (argp, message) ;
- vsnprintf (buffer, 1023, message, argp) ;
- va_end (argp) ;
-
- lcdPuts (fd, buffer) ;
-}
-
-
-/*
- * lcdInit:
- * Take a lot of parameters and initialise the LCD, and return a handle to
- * that LCD, or -1 if any error.
- *********************************************************************************
- */
-
-int lcdInit (const int rows, const int cols, const int bits,
- const int rs, const int strb,
- const int d0, const int d1, const int d2, const int d3, const int d4,
- const int d5, const int d6, const int d7)
-{
- static int initialised = 0 ;
-
- unsigned char func ;
- int i ;
- int lcdFd = -1 ;
- struct lcdDataStruct *lcd ;
-
- if (initialised == 0)
- {
- initialised = 1 ;
- for (i = 0 ; i < MAX_LCDS ; ++i)
- lcds [i] = NULL ;
- }
-
-// Simple sanity checks
-
- if (! ((bits == 4) || (bits == 8)))
- return -1 ;
-
- if ((rows < 0) || (rows > 20))
- return -1 ;
-
- if ((cols < 0) || (cols > 20))
- return -1 ;
-
-// Create a new LCD:
-
- for (i = 0 ; i < MAX_LCDS ; ++i)
- {
- if (lcds [i] == NULL)
- {
- lcdFd = i ;
- break ;
- }
- }
-
- if (lcdFd == -1)
- return -1 ;
-
- lcd = (struct lcdDataStruct *)malloc (sizeof (struct lcdDataStruct)) ;
- if (lcd == NULL)
- return -1 ;
-
- lcd->rsPin = rs ;
- lcd->strbPin = strb ;
- lcd->bits = 8 ; // For now - we'll set it properly later.
- lcd->rows = rows ;
- lcd->cols = cols ;
- lcd->cx = 0 ;
- lcd->cy = 0 ;
-
- lcd->dataPins [0] = d0 ;
- lcd->dataPins [1] = d1 ;
- lcd->dataPins [2] = d2 ;
- lcd->dataPins [3] = d3 ;
- lcd->dataPins [4] = d4 ;
- lcd->dataPins [5] = d5 ;
- lcd->dataPins [6] = d6 ;
- lcd->dataPins [7] = d7 ;
-
- lcds [lcdFd] = lcd ;
-
- digitalWrite (lcd->rsPin, 0) ; pinMode (lcd->rsPin, OUTPUT) ;
- digitalWrite (lcd->strbPin, 0) ; pinMode (lcd->strbPin, OUTPUT) ;
-
- for (i = 0 ; i < bits ; ++i)
- {
- digitalWrite (lcd->dataPins [i], 0) ;
- pinMode (lcd->dataPins [i], OUTPUT) ;
- }
- delay (35) ; // mS
-
-
-// 4-bit mode?
-// OK. This is a PIG and it's not at all obvious from the documentation I had,
-// so I guess some others have worked through either with better documentation
-// or more trial and error... Anyway here goes:
-//
-// It seems that the controller needs to see the FUNC command at least 3 times
-// consecutively - in 8-bit mode. If you're only using 8-bit mode, then it appears
-// that you can get away with one func-set, however I'd not rely on it...
-//
-// So to set 4-bit mode, you need to send the commands one nibble at a time,
-// the same three times, but send the command to set it into 8-bit mode those
-// three times, then send a final 4th command to set it into 4-bit mode, and only
-// then can you flip the switch for the rest of the library to work in 4-bit
-// mode which sends the commands as 2 x 4-bit values.
-
- if (bits == 4)
- {
- func = LCD_FUNC | LCD_FUNC_DL ; // Set 8-bit mode 3 times
- put4Command (lcd, func >> 4) ; delay (35) ;
- put4Command (lcd, func >> 4) ; delay (35) ;
- put4Command (lcd, func >> 4) ; delay (35) ;
- func = LCD_FUNC ; // 4th set: 4-bit mode
- put4Command (lcd, func >> 4) ; delay (35) ;
- lcd->bits = 4 ;
- }
- else
- {
- func = LCD_FUNC | LCD_FUNC_DL ;
- putCommand (lcd, func ) ; delay (35) ;
- putCommand (lcd, func ) ; delay (35) ;
- putCommand (lcd, func ) ; delay (35) ;
- }
-
- if (lcd->rows > 1)
- {
- func |= LCD_FUNC_N ;
- putCommand (lcd, func) ; delay (35) ;
- }
-
-// Rest of the initialisation sequence
-
- lcdDisplay (lcdFd, TRUE) ;
- lcdCursor (lcdFd, FALSE) ;
- lcdCursorBlink (lcdFd, FALSE) ;
- lcdClear (lcdFd) ;
-
- putCommand (lcd, LCD_ENTRY | LCD_ENTRY_ID) ;
- putCommand (lcd, LCD_CDSHIFT | LCD_CDSHIFT_RL) ;
-
- return lcdFd ;
-}
diff --git a/WiringPi/devLib/lcd.h b/WiringPi/devLib/lcd.h
deleted file mode 100644
index 0a0e598..0000000
--- a/WiringPi/devLib/lcd.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * lcd.h:
- * Text-based LCD driver.
- * This is designed to drive the parallel interface LCD drivers
- * based in the Hitachi HD44780U controller and compatables.
- *
- * Copyright (c) 2012 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#define MAX_LCDS 8
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern void lcdHome (const int fd) ;
-extern void lcdClear (const int fd) ;
-extern void lcdDisplay (const int fd, int state) ;
-extern void lcdCursor (const int fd, int state) ;
-extern void lcdCursorBlink (const int fd, int state) ;
-extern void lcdSendCommand (const int fd, unsigned char command) ;
-extern void lcdPosition (const int fd, int x, int y) ;
-extern void lcdCharDef (const int fd, int index, unsigned char data [8]) ;
-extern void lcdPutchar (const int fd, unsigned char data) ;
-extern void lcdPuts (const int fd, const char *string) ;
-extern void lcdPrintf (const int fd, const char *message, ...) ;
-
-extern int lcdInit (const int rows, const int cols, const int bits,
- const int rs, const int strb,
- const int d0, const int d1, const int d2, const int d3, const int d4,
- const int d5, const int d6, const int d7) ;
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/WiringPi/devLib/lcd128x64.c b/WiringPi/devLib/lcd128x64.c
deleted file mode 100644
index accd5c3..0000000
--- a/WiringPi/devLib/lcd128x64.c
+++ /dev/null
@@ -1,673 +0,0 @@
-/*
- * lcd128x64.c:
- * Graphics-based LCD driver.
- * This is designed to drive the parallel interface LCD drivers
- * based on the generic 12864H chips
- *
- * There are many variations on these chips, however they all mostly
- * seem to be similar.
- * This implementation has the Pins from the Pi hard-wired into it,
- * in particular wiringPi pins 0-7 so that we can use
- * digitalWriteByete() to speed things up somewhat.
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-#include
-
-#include "font.h"
-#include "lcd128x64.h"
-
-// Size
-
-#define LCD_WIDTH 128
-#define LCD_HEIGHT 64
-
-// Hardware Pins
-// Note pins 0-7 are the 8-bit data port
-
-#define CS1 10
-#define CS2 11
-#define STROBE 12
-#define RS 13
-
-// Software copy of the framebuffer
-// it's 8-bit deep although the display itself is only 1-bit deep.
-
-static unsigned char frameBuffer [LCD_WIDTH * LCD_HEIGHT] ;
-
-static int maxX, maxY ;
-static int lastX, lastY ;
-static int xOrigin, yOrigin ;
-static int lcdOrientation = 0 ;
-
-/*
- * strobe:
- * Toggle the strobe (Really the "E") pin to the device.
- * According to the docs, data is latched on the falling edge.
- *********************************************************************************
- */
-
-static void strobe (void)
-{
- digitalWrite (STROBE, 1) ; delayMicroseconds (1) ;
- digitalWrite (STROBE, 0) ; delayMicroseconds (5) ;
-}
-
-
-/*
- * sentData:
- * Send an data or command byte to the display.
- *********************************************************************************
- */
-
-static void sendData (const int data, const int chip)
-{
- digitalWrite (chip, 0) ;
- digitalWriteByte (data) ;
- strobe () ;
- digitalWrite (chip, 1) ;
-}
-
-
-/*
- * sendCommand:
- * Send a command byte to the display
- *********************************************************************************
- */
-
-static void sendCommand (const int command, const int chip)
-{
- digitalWrite (RS, 0) ;
- sendData (command, chip) ;
- digitalWrite (RS, 1) ;
-}
-
-
-/*
- * setCol: SetLine:
- * Set the column and line addresses
- *********************************************************************************
- */
-
-static void setCol (int col, const int chip)
- { sendCommand (0x40 | (col & 0x3F), chip) ; }
-
-static void setLine (int line, const int chip)
- { sendCommand (0xB8 | (line & 0x07), chip) ; }
-
-
-/*
- * lcd128x64update:
- * Copy our software version to the real display
- *********************************************************************************
- */
-
-void lcd128x64update (void)
-{
- int line, x, y, fbLoc ;
- unsigned char byte ;
-
-// Left side
-
- for (line = 0 ; line < 8 ; ++line)
- {
- setCol (0, CS1) ;
- setLine (line, CS1) ;
-
- for (x = 63 ; x >= 0 ; --x)
- {
- byte = 0 ;
- for (y = 0 ; y < 8 ; ++y)
- {
- fbLoc = x + (((7 - line) * 8) + (7 - y)) * LCD_WIDTH ;
- if (frameBuffer [fbLoc] != 0)
- byte |= (1 << y) ;
- }
- sendData (byte, CS1) ;
- }
- }
-
-// Right side
-
- for (line = 0 ; line < 8 ; ++line)
- {
- setCol (0, CS2) ;
- setLine (line, CS2) ;
-
- for (x = 127 ; x >= 64 ; --x)
- {
- byte = 0 ;
- for (y = 0 ; y < 8 ; ++y)
- {
- fbLoc = x + (((7 - line) * 8) + (7 - y)) * LCD_WIDTH ;
- if (frameBuffer [fbLoc] != 0)
- byte |= (1 << y) ;
- }
- sendData (byte, CS2) ;
- }
- }
-}
-
-
-/*
- * lcd128x64setOrigin:
- * Set the display offset origin
- *********************************************************************************
- */
-
-void lcd128x64setOrigin (int x, int y)
-{
- xOrigin = x ;
- yOrigin = y ;
-}
-
-
-/*
- * lcd128x64setOrientation:
- * Set the display orientation:
- * 0: Normal, the display is portrait mode, 0,0 is top left
- * 1: Landscape
- * 2: Portrait, flipped
- * 3: Landscape, flipped
- *********************************************************************************
- */
-
-void lcd128x64setOrientation (int orientation)
-{
- lcdOrientation = orientation & 3 ;
-
- lcd128x64setOrigin (0,0) ;
-
- switch (lcdOrientation)
- {
- case 0:
- maxX = LCD_WIDTH ;
- maxY = LCD_HEIGHT ;
- break ;
-
- case 1:
- maxX = LCD_HEIGHT ;
- maxY = LCD_WIDTH ;
- break ;
-
- case 2:
- maxX = LCD_WIDTH ;
- maxY = LCD_HEIGHT ;
- break ;
-
- case 3:
- maxX = LCD_HEIGHT ;
- maxY = LCD_WIDTH ;
- break ;
- }
-}
-
-
-/*
- * lcd128x64orientCoordinates:
- * Adjust the coordinates given to the display orientation
- *********************************************************************************
- */
-
-void lcd128x64orientCoordinates (int *x, int *y)
-{
- register int tmp ;
-
- *x += xOrigin ;
- *y += yOrigin ;
- *y = maxY - *y - 1 ;
-
- switch (lcdOrientation)
- {
- case 0:
- break;
-
- case 1:
- tmp = maxY - *y - 1 ;
- *y = *x ;
- *x = tmp ;
- break;
-
- case 2:
- *x = maxX - *x - 1 ;
- *y = maxY - *y - 1 ;
- break;
-
- case 3:
- *x = maxX - *x - 1 ;
- tmp = *y ;
- *y = *x ;
- *x = tmp ;
- break ;
- }
-}
-
-
-/*
- * lcd128x64getScreenSize:
- * Return the max X & Y screen sizes. Needs to be called again, if you
- * change screen orientation.
- *********************************************************************************
- */
-
-void lcd128x64getScreenSize (int *x, int *y)
-{
- *x = maxX ;
- *y = maxY ;
-}
-
-
-/*
- *********************************************************************************
- * Standard Graphical Functions
- *********************************************************************************
- */
-
-
-/*
- * lcd128x64point:
- * Plot a pixel.
- *********************************************************************************
- */
-
-void lcd128x64point (int x, int y, int colour)
-{
- lastX = x ;
- lastY = y ;
-
- lcd128x64orientCoordinates (&x, &y) ;
-
- if ((x < 0) || (x >= LCD_WIDTH) || (y < 0) || (y >= LCD_HEIGHT))
- return ;
-
- frameBuffer [x + y * LCD_WIDTH] = colour ;
-}
-
-
-/*
- * lcd128x64line: lcd128x64lineTo:
- * Classic Bressenham Line code
- *********************************************************************************
- */
-
-void lcd128x64line (int x0, int y0, int x1, int y1, int colour)
-{
- int dx, dy ;
- int sx, sy ;
- int err, e2 ;
-
- lastX = x1 ;
- lastY = y1 ;
-
- dx = abs (x1 - x0) ;
- dy = abs (y1 - y0) ;
-
- sx = (x0 < x1) ? 1 : -1 ;
- sy = (y0 < y1) ? 1 : -1 ;
-
- err = dx - dy ;
-
- for (;;)
- {
- lcd128x64point (x0, y0, colour) ;
-
- if ((x0 == x1) && (y0 == y1))
- break ;
-
- e2 = 2 * err ;
-
- if (e2 > -dy)
- {
- err -= dy ;
- x0 += sx ;
- }
-
- if (e2 < dx)
- {
- err += dx ;
- y0 += sy ;
- }
- }
-
-}
-
-void lcd128x64lineTo (int x, int y, int colour)
-{
- lcd128x64line (lastX, lastY, x, y, colour) ;
-}
-
-
-/*
- * lcd128x64rectangle:
- * A rectangle is a spoilt days fishing
- *********************************************************************************
- */
-
-void lcd128x64rectangle (int x1, int y1, int x2, int y2, int colour, int filled)
-{
- register int x ;
-
- if (filled)
- {
- /**/ if (x1 == x2)
- lcd128x64line (x1, y1, x2, y2, colour) ;
- else if (x1 < x2)
- for (x = x1 ; x <= x2 ; ++x)
- lcd128x64line (x, y1, x, y2, colour) ;
- else
- for (x = x2 ; x <= x1 ; ++x)
- lcd128x64line (x, y1, x, y2, colour) ;
- }
- else
- {
- lcd128x64line (x1, y1, x2, y1, colour) ;
- lcd128x64lineTo (x2, y2, colour) ;
- lcd128x64lineTo (x1, y2, colour) ;
- lcd128x64lineTo (x1, y1, colour) ;
- }
-}
-
-
-/*
- * lcd128x64circle:
- * This is the midpoint circle algorithm.
- *********************************************************************************
- */
-
-void lcd128x64circle (int x, int y, int r, int colour, int filled)
-{
- int ddF_x = 1 ;
- int ddF_y = -2 * r ;
-
- int f = 1 - r ;
- int x1 = 0 ;
- int y1 = r ;
-
- if (filled)
- {
- lcd128x64line (x, y + r, x, y - r, colour) ;
- lcd128x64line (x + r, y, x - r, y, colour) ;
- }
- else
- {
- lcd128x64point (x, y + r, colour) ;
- lcd128x64point (x, y - r, colour) ;
- lcd128x64point (x + r, y, colour) ;
- lcd128x64point (x - r, y, colour) ;
- }
-
- while (x1 < y1)
- {
- if (f >= 0)
- {
- y1-- ;
- ddF_y += 2 ;
- f += ddF_y ;
- }
- x1++ ;
- ddF_x += 2 ;
- f += ddF_x ;
- if (filled)
- {
- lcd128x64line (x + x1, y + y1, x - x1, y + y1, colour) ;
- lcd128x64line (x + x1, y - y1, x - x1, y - y1, colour) ;
- lcd128x64line (x + y1, y + x1, x - y1, y + x1, colour) ;
- lcd128x64line (x + y1, y - x1, x - y1, y - x1, colour) ;
- }
- else
- {
- lcd128x64point (x + x1, y + y1, colour) ; lcd128x64point (x - x1, y + y1, colour) ;
- lcd128x64point (x + x1, y - y1, colour) ; lcd128x64point (x - x1, y - y1, colour) ;
- lcd128x64point (x + y1, y + x1, colour) ; lcd128x64point (x - y1, y + x1, colour) ;
- lcd128x64point (x + y1, y - x1, colour) ; lcd128x64point (x - y1, y - x1, colour) ;
- }
- }
-}
-
-
-/*
- * lcd128x64ellipse:
- * Fast ellipse drawing algorithm by
- * John Kennedy
- * Mathematics Department
- * Santa Monica College
- * 1900 Pico Blvd.
- * Santa Monica, CA 90405
- * jrkennedy6@gmail.com
- * -Confirned in email this algorithm is in the public domain -GH-
- *********************************************************************************
- */
-
-static void plot4ellipsePoints (int cx, int cy, int x, int y, int colour, int filled)
-{
- if (filled)
- {
- lcd128x64line (cx + x, cy + y, cx - x, cy + y, colour) ;
- lcd128x64line (cx - x, cy - y, cx + x, cy - y, colour) ;
- }
- else
- {
- lcd128x64point (cx + x, cy + y, colour) ;
- lcd128x64point (cx - x, cy + y, colour) ;
- lcd128x64point (cx - x, cy - y, colour) ;
- lcd128x64point (cx + x, cy - y, colour) ;
- }
-}
-
-void lcd128x64ellipse (int cx, int cy, int xRadius, int yRadius, int colour, int filled)
-{
- int x, y ;
- int xChange, yChange, ellipseError ;
- int twoAsquare, twoBsquare ;
- int stoppingX, stoppingY ;
-
- twoAsquare = 2 * xRadius * xRadius ;
- twoBsquare = 2 * yRadius * yRadius ;
-
- x = xRadius ;
- y = 0 ;
-
- xChange = yRadius * yRadius * (1 - 2 * xRadius) ;
- yChange = xRadius * xRadius ;
-
- ellipseError = 0 ;
- stoppingX = twoBsquare * xRadius ;
- stoppingY = 0 ;
-
- while (stoppingX >= stoppingY) // 1st set of points
- {
- plot4ellipsePoints (cx, cy, x, y, colour, filled) ;
- ++y ;
- stoppingY += twoAsquare ;
- ellipseError += yChange ;
- yChange += twoAsquare ;
-
- if ((2 * ellipseError + xChange) > 0 )
- {
- --x ;
- stoppingX -= twoBsquare ;
- ellipseError += xChange ;
- xChange += twoBsquare ;
- }
- }
-
- x = 0 ;
- y = yRadius ;
-
- xChange = yRadius * yRadius ;
- yChange = xRadius * xRadius * (1 - 2 * yRadius) ;
-
- ellipseError = 0 ;
- stoppingX = 0 ;
- stoppingY = twoAsquare * yRadius ;
-
- while (stoppingX <= stoppingY) //2nd set of points
- {
- plot4ellipsePoints (cx, cy, x, y, colour, filled) ;
- ++x ;
- stoppingX += twoBsquare ;
- ellipseError += xChange ;
- xChange += twoBsquare ;
-
- if ((2 * ellipseError + yChange) > 0 )
- {
- --y ;
- stoppingY -= twoAsquare ;
- ellipseError += yChange ;
- yChange += twoAsquare ;
- }
- }
-}
-
-
-/*
- * lcd128x64putchar:
- * Print a single character to the screen
- *********************************************************************************
- */
-
-void lcd128x64putchar (int x, int y, int c, int bgCol, int fgCol)
-{
- int y1, y2 ;
-
- unsigned char line ;
- unsigned char *fontPtr ;
-
-// Can't print if we're offscreen
-
-//if ((x < 0) || (x >= (maxX - fontWidth)) || (y < 0) || (y >= (maxY - fontHeight)))
-// return ;
-
- fontPtr = font + c * fontHeight ;
-
- for (y1 = fontHeight - 1 ; y1 >= 0 ; --y1)
- {
- y2 = y + y1 ;
- line = *fontPtr++ ;
- lcd128x64point (x + 0, y2, (line & 0x80) == 0 ? bgCol : fgCol) ;
- lcd128x64point (x + 1, y2, (line & 0x40) == 0 ? bgCol : fgCol) ;
- lcd128x64point (x + 2, y2, (line & 0x20) == 0 ? bgCol : fgCol) ;
- lcd128x64point (x + 3, y2, (line & 0x10) == 0 ? bgCol : fgCol) ;
- lcd128x64point (x + 4, y2, (line & 0x08) == 0 ? bgCol : fgCol) ;
- lcd128x64point (x + 5, y2, (line & 0x04) == 0 ? bgCol : fgCol) ;
- lcd128x64point (x + 6, y2, (line & 0x02) == 0 ? bgCol : fgCol) ;
- lcd128x64point (x + 7, y2, (line & 0x01) == 0 ? bgCol : fgCol) ;
- }
-}
-
-
-/*
- * lcd128x64puts:
- * Send a string to the display. Obeys \n and \r formatting
- *********************************************************************************
- */
-
-void lcd128x64puts (int x, int y, const char *str, int bgCol, int fgCol)
-{
- int c, mx, my ;
-
- mx = x ; my = y ;
-
- while (*str)
- {
- c = *str++ ;
-
- if (c == '\r')
- {
- mx = x ;
- continue ;
- }
-
- if (c == '\n')
- {
- mx = x ;
- my -= fontHeight ;
- continue ;
- }
-
- lcd128x64putchar (mx, my, c, bgCol, fgCol) ;
-
- mx += fontWidth ;
- if (mx >= (maxX - fontWidth))
- {
- mx = 0 ;
- my -= fontHeight ;
- }
- }
-}
-
-
-/*
- * lcd128x64clear:
- * Clear the display to the given colour.
- *********************************************************************************
- */
-
-void lcd128x64clear (int colour)
-{
- register int i ;
- register unsigned char *ptr = frameBuffer ;
-
- for (i = 0 ; i < (maxX * maxY) ; ++i)
- *ptr++ = colour ;
-}
-
-
-
-
-/*
- * lcd128x64setup:
- * Initialise the display and GPIO.
- *********************************************************************************
- */
-
-int lcd128x64setup (void)
-{
- int i ;
-
- for (i = 0 ; i < 8 ; ++i)
- pinMode (i, OUTPUT) ;
-
- digitalWrite (CS1, 1) ;
- digitalWrite (CS2, 1) ;
- digitalWrite (STROBE, 0) ;
- digitalWrite (RS, 1) ;
-
- pinMode (CS1, OUTPUT) ;
- pinMode (CS2, OUTPUT) ;
- pinMode (STROBE, OUTPUT) ;
- pinMode (RS, OUTPUT) ;
-
- sendCommand (0x3F, CS1) ; // Display ON
- sendCommand (0xC0, CS1) ; // Set display start line to 0
-
- sendCommand (0x3F, CS2) ; // Display ON
- sendCommand (0xC0, CS2) ; // Set display start line to 0
-
- lcd128x64clear (0) ;
- lcd128x64setOrientation (0) ;
- lcd128x64update () ;
-
- return 0 ;
-}
diff --git a/WiringPi/devLib/lcd128x64.h b/WiringPi/devLib/lcd128x64.h
deleted file mode 100644
index b448bbc..0000000
--- a/WiringPi/devLib/lcd128x64.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * lcd128x64.h:
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-extern void lcd128x64setOrigin (int x, int y) ;
-extern void lcd128x64setOrientation (int orientation) ;
-extern void lcd128x64orientCoordinates (int *x, int *y) ;
-extern void lcd128x64getScreenSize (int *x, int *y) ;
-extern void lcd128x64point (int x, int y, int colour) ;
-extern void lcd128x64line (int x0, int y0, int x1, int y1, int colour) ;
-extern void lcd128x64lineTo (int x, int y, int colour) ;
-extern void lcd128x64rectangle (int x1, int y1, int x2, int y2, int colour, int filled) ;
-extern void lcd128x64circle (int x, int y, int r, int colour, int filled) ;
-extern void lcd128x64ellipse (int cx, int cy, int xRadius, int yRadius, int colour, int filled) ;
-extern void lcd128x64putchar (int x, int y, int c, int bgCol, int fgCol) ;
-extern void lcd128x64puts (int x, int y, const char *str, int bgCol, int fgCol) ;
-extern void lcd128x64update (void) ;
-extern void lcd128x64clear (int colour) ;
-
-extern int lcd128x64setup (void) ;
diff --git a/WiringPi/devLib/maxdetect.c b/WiringPi/devLib/maxdetect.c
deleted file mode 100755
index 23eabf8..0000000
--- a/WiringPi/devLib/maxdetect.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * maxdetect.c:
- * Driver for the MaxDetect series sensors
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-//#include
-//#include
-//#include
-
-#include
-
-#include "maxdetect.h"
-
-#ifndef TRUE
-# define TRUE (1==1)
-# define FALSE (1==2)
-#endif
-
-
-/*
- * maxDetectLowHighWait:
- * Wait for a transition from high to low on the bus
- *********************************************************************************
- */
-
-static void maxDetectLowHighWait (const int pin)
-{
- unsigned int timeOut = millis () + 2000 ;
-
- while (digitalRead (pin) == HIGH)
- if (millis () > timeOut)
- return ;
-
- while (digitalRead (pin) == LOW)
- if (millis () > timeOut)
- return ;
-}
-
-
-/*
- * maxDetectClockByte:
- * Read in a single byte from the MaxDetect bus
- *********************************************************************************
- */
-
-static unsigned int maxDetectClockByte (const int pin)
-{
- unsigned int byte = 0 ;
- int bit ;
-
- for (bit = 0 ; bit < 8 ; ++bit)
- {
- maxDetectLowHighWait (pin) ;
-
-// bit starting now - we need to time it.
-
- delayMicroseconds (30) ;
- byte <<= 1 ;
- if (digitalRead (pin) == HIGH) // It's a 1
- byte |= 1 ;
- }
-
- return byte ;
-}
-
-
-/*
- * maxDetectRead:
- * Read in and return the 4 data bytes from the MaxDetect sensor.
- * Return TRUE/FALSE depending on the checksum validity
- *********************************************************************************
- */
-
-int maxDetectRead (const int pin, unsigned char buffer [4])
-{
- int i ;
- unsigned int checksum ;
- unsigned char localBuf [5] ;
-
-// Wake up the RHT03 by pulling the data line low, then high
-// Low for 10mS, high for 40uS.
-
- pinMode (pin, OUTPUT) ;
- digitalWrite (pin, 0) ; delay (10) ;
- digitalWrite (pin, 1) ; delayMicroseconds (40) ;
- pinMode (pin, INPUT) ;
-
-// Now wait for sensor to pull pin low
-
- maxDetectLowHighWait (pin) ;
-
-// and read in 5 bytes (40 bits)
-
- for (i = 0 ; i < 5 ; ++i)
- localBuf [i] = maxDetectClockByte (pin) ;
-
- checksum = 0 ;
- for (i = 0 ; i < 4 ; ++i)
- {
- buffer [i] = localBuf [i] ;
- checksum += localBuf [i] ;
- }
- checksum &= 0xFF ;
-
- return checksum == localBuf [4] ;
-}
-
-
-/*
- * readRHT03:
- * Read the Temperature & Humidity from an RHT03 sensor
- *********************************************************************************
- */
-
-int readRHT03 (const int pin, int *temp, int *rh)
-{
- static unsigned int nextTime = 0 ;
- static int lastTemp = 0 ;
- static int lastRh = 0 ;
- static int lastResult = TRUE ;
-
- unsigned char buffer [4] ;
-
-// Don't read more than once a second
-
- if (millis () < nextTime)
- {
- *temp = lastTemp ;
- *rh = lastRh ;
- return lastResult ;
- }
-
- lastResult = maxDetectRead (pin, buffer) ;
-
- if (lastResult)
- {
- *temp = lastTemp = (buffer [2] * 256 + buffer [3]) ;
- *rh = lastRh = (buffer [0] * 256 + buffer [1]) ;
- nextTime = millis () + 2000 ;
- return TRUE ;
- }
- else
- {
- return FALSE ;
- }
-}
diff --git a/WiringPi/devLib/maxdetect.h b/WiringPi/devLib/maxdetect.h
deleted file mode 100755
index a1fd742..0000000
--- a/WiringPi/devLib/maxdetect.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * maxdetect.h:
- * Driver for the MaxDetect series sensors
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// Main generic function
-
-int maxDetectRead (const int pin, unsigned char buffer [4]) ;
-
-// Individual sensors
-
-int readRHT03 (const int pin, int *temp, int *rh) ;
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/WiringPi/devLib/piFace.c b/WiringPi/devLib/piFace.c
deleted file mode 100644
index 4475c7f..0000000
--- a/WiringPi/devLib/piFace.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * piFace.:
- * This file to interface with the PiFace peripheral device which
- * has an MCP23S17 GPIO device connected via the SPI bus.
- *
- * Copyright (c) 2012-2013 Gordon Henderson
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation, either version 3 of the
- * License, or (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with wiringPi.
- * If not, see .
- ***********************************************************************
- */
-
-
-#include
-#include
-
-#include
-#include
-
-#include "piFace.h"
-
-
-/*
- * myDigitalWrite:
- * Perform the digitalWrite function on the PiFace board
- *********************************************************************************
- */
-
-void myDigitalWrite (struct wiringPiNodeStruct *node, int pin, int value)
-{
- digitalWrite (pin + 16, value) ;
-}
-
-
-/*
- * myDigitalRead:
- * Perform the digitalRead function on the PiFace board
- * With a slight twist - if we read from base + 8, then we
- * read from the output latch...
- *********************************************************************************
- */
-
-int myDigitalRead (struct wiringPiNodeStruct *node, int pin)
-{
- if ((pin - node->pinBase) >= 8)
- return digitalRead (pin + 8) ;
- else
- return digitalRead (pin + 16 + 8) ;
-}
-
-
-/*
- * myPullUpDnControl:
- * Perform the pullUpDnControl function on the PiFace board
- *********************************************************************************
- */
-
-void myPullUpDnControl (struct wiringPiNodeStruct *node, int pin, int pud)
-{
- pullUpDnControl (pin + 16 + 8, pud) ;
-}
-
-
-/*
- * piFaceSetup
- * We're going to create an instance of the mcp23s17 here, then
- * provide our own read/write routines on-top of it...
- * The supplied PiFace code (in Pithon) treats it as an 8-bit device
- * where you write the output ports and read the input port using the
- * same pin numbers, however I have had a request to be able to read
- * the output port, so reading 8..15 will read the output latch.
- *********************************************************************************
- */
-
-int piFaceSetup (const int pinBase)
-{
- int i ;
- struct wiringPiNodeStruct *node ;
-
-// Create an mcp23s17 instance:
-
- mcp23s17Setup (pinBase + 16, 0, 0) ;
-
-// Set the direction bits
-
- for (i = 0 ; i < 8 ; ++i)
- {
- pinMode (pinBase + 16 + i, OUTPUT) ; // Port A is the outputs
- pinMode (pinBase + 16 + 8 + i, INPUT) ; // Port B inputs.
- }
-
- node = wiringPiNewNode (pinBase, 16) ;
- node->digitalRead = myDigitalRead ;
- node->digitalWrite = myDigitalWrite ;
- node->pullUpDnControl = myPullUpDnControl ;
-
- return 0 ;
-}
diff --git a/WiringPi/devLib/piFace.h b/WiringPi/devLib/piFace.h
deleted file mode 100644
index 4965314..0000000
--- a/WiringPi/devLib/piFace.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * piFace.h:
- * Control the PiFace Interface board for the Raspberry Pi
- * Copyright (c) 2012-2013 Gordon Henderson
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern int piFaceSetup (const int pinBase) ;
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/WiringPi/devLib/piGlow.c b/WiringPi/devLib/piGlow.c
deleted file mode 100644
index 44e3db8..0000000
--- a/WiringPi/devLib/piGlow.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * piGlow.c:
- * Easy access to the Pimoroni PiGlow board.
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-#include "piGlow.h"
-
-#define PIGLOW_BASE 577
-
-static int leg0 [6] = { 6, 7, 8, 5, 4, 9 } ;
-static int leg1 [6] = { 17, 16, 15, 13, 11, 10 } ;
-static int leg2 [6] = { 0, 1, 2, 3, 14, 12 } ;
-
-
-/*
- * piGlow1:
- * Light up an individual LED
- *********************************************************************************
- */
-
-void piGlow1 (const int leg, const int ring, const int intensity)
-{
- int *legLeds ;
-
- if ((leg < 0) || (leg > 2)) return ;
- if ((ring < 0) || (ring > 5)) return ;
-
- /**/ if (leg == 0)
- legLeds = leg0 ;
- else if (leg == 1)
- legLeds = leg1 ;
- else
- legLeds = leg2 ;
-
- analogWrite (PIGLOW_BASE + legLeds [ring], intensity) ;
-}
-
-/*
- * piGlowLeg:
- * Light up all 6 LEDs on a leg
- *********************************************************************************
- */
-
-void piGlowLeg (const int leg, const int intensity)
-{
- int i ;
- int *legLeds ;
-
- if ((leg < 0) || (leg > 2))
- return ;
-
- /**/ if (leg == 0)
- legLeds = leg0 ;
- else if (leg == 1)
- legLeds = leg1 ;
- else
- legLeds = leg2 ;
-
- for (i = 0 ; i < 6 ; ++i)
- analogWrite (PIGLOW_BASE + legLeds [i], intensity) ;
-}
-
-
-/*
- * piGlowRing:
- * Light up 3 LEDs in a ring. Ring 0 is the outermost, 5 the innermost
- *********************************************************************************
- */
-
-void piGlowRing (const int ring, const int intensity)
-{
- if ((ring < 0) || (ring > 5))
- return ;
-
- analogWrite (PIGLOW_BASE + leg0 [ring], intensity) ;
- analogWrite (PIGLOW_BASE + leg1 [ring], intensity) ;
- analogWrite (PIGLOW_BASE + leg2 [ring], intensity) ;
-}
-
-/*
- * piGlowSetup:
- * Initialise the board & remember the pins we're using
- *********************************************************************************
- */
-
-void piGlowSetup (int clear)
-{
- sn3218Setup (PIGLOW_BASE) ;
-
- if (clear)
- {
- piGlowLeg (0, 0) ;
- piGlowLeg (1, 0) ;
- piGlowLeg (2, 0) ;
- }
-}
diff --git a/WiringPi/devLib/piGlow.h b/WiringPi/devLib/piGlow.h
deleted file mode 100644
index a4d89d0..0000000
--- a/WiringPi/devLib/piGlow.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * piglow.h:
- * Easy access to the Pimoroni PiGlow board.
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-
-#define PIGLOW_RED 0
-#define PIGLOW_ORANGE 1
-#define PIGLOW_YELLOW 2
-#define PIGLOW_GREEN 3
-#define PIGLOW_BLUE 4
-#define PIGLOW_WHITE 5
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern void piGlow1 (const int leg, const int ring, const int intensity) ;
-extern void piGlowLeg (const int leg, const int intensity) ;
-extern void piGlowRing (const int ring, const int intensity) ;
-extern void piGlowSetup (int clear) ;
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/WiringPi/devLib/piNes.c b/WiringPi/devLib/piNes.c
deleted file mode 100644
index a115050..0000000
--- a/WiringPi/devLib/piNes.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * piNes.c:
- * Driver for the NES Joystick controller on the Raspberry Pi
- * Copyright (c) 2012 Gordon Henderson
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation, either version 3 of the
- * License, or (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with wiringPi.
- * If not, see .
- ***********************************************************************
- */
-
-#include
-
-#include "piNes.h"
-
-#define MAX_NES_JOYSTICKS 8
-
-#define NES_RIGHT 0x01
-#define NES_LEFT 0x02
-#define NES_DOWN 0x04
-#define NES_UP 0x08
-#define NES_START 0x10
-#define NES_SELECT 0x20
-#define NES_B 0x40
-#define NES_A 0x80
-
-
-#define PULSE_TIME 25
-
-// Data to store the pins for each controller
-
-struct nesPinsStruct
-{
- unsigned int cPin, dPin, lPin ;
-} ;
-
-static struct nesPinsStruct nesPins [MAX_NES_JOYSTICKS] ;
-
-static int joysticks = 0 ;
-
-
-/*
- * setupNesJoystick:
- * Create a new NES joystick interface, program the pins, etc.
- *********************************************************************************
- */
-
-int setupNesJoystick (int dPin, int cPin, int lPin)
-{
- if (joysticks == MAX_NES_JOYSTICKS)
- return -1 ;
-
- nesPins [joysticks].dPin = dPin ;
- nesPins [joysticks].cPin = cPin ;
- nesPins [joysticks].lPin = lPin ;
-
- digitalWrite (lPin, LOW) ;
- digitalWrite (cPin, LOW) ;
-
- pinMode (lPin, OUTPUT) ;
- pinMode (cPin, OUTPUT) ;
- pinMode (dPin, INPUT) ;
-
- return joysticks++ ;
-}
-
-
-/*
- * readNesJoystick:
- * Do a single scan of the NES Joystick.
- *********************************************************************************
- */
-
-unsigned int readNesJoystick (int joystick)
-{
- unsigned int value = 0 ;
- int i ;
-
- struct nesPinsStruct *pins = &nesPins [joystick] ;
-
-// Toggle Latch - which presents the first bit
-
- digitalWrite (pins->lPin, HIGH) ; delayMicroseconds (PULSE_TIME) ;
- digitalWrite (pins->lPin, LOW) ; delayMicroseconds (PULSE_TIME) ;
-
-// Read first bit
-
- value = digitalRead (pins->dPin) ;
-
-// Now get the next 7 bits with the clock
-
- for (i = 0 ; i < 7 ; ++i)
- {
- digitalWrite (pins->cPin, HIGH) ; delayMicroseconds (PULSE_TIME) ;
- digitalWrite (pins->cPin, LOW) ; delayMicroseconds (PULSE_TIME) ;
- value = (value << 1) | digitalRead (pins->dPin) ;
- }
-
- return value ^ 0xFF ;
-}
diff --git a/WiringPi/devLib/piNes.h b/WiringPi/devLib/piNes.h
deleted file mode 100644
index 897f181..0000000
--- a/WiringPi/devLib/piNes.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * piNes.h:
- * Driver for the NES Joystick controller on the Raspberry Pi
- * Copyright (c) 2012 Gordon Henderson
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation, either version 3 of the
- * License, or (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with wiringPi.
- * If not, see .
- ***********************************************************************
- */
-
-#define MAX_NES_JOYSTICKS 8
-
-#define NES_RIGHT 0x01
-#define NES_LEFT 0x02
-#define NES_DOWN 0x04
-#define NES_UP 0x08
-#define NES_START 0x10
-#define NES_SELECT 0x20
-#define NES_B 0x40
-#define NES_A 0x80
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern int setupNesJoystick (int dPin, int cPin, int lPin) ;
-extern unsigned int readNesJoystick (int joystick) ;
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/WiringPi/examples/COPYING.LESSER b/WiringPi/examples/COPYING.LESSER
deleted file mode 100644
index 65c5ca8..0000000
--- a/WiringPi/examples/COPYING.LESSER
+++ /dev/null
@@ -1,165 +0,0 @@
- GNU LESSER GENERAL PUBLIC LICENSE
- Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc.
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
- This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
- 0. Additional Definitions.
-
- As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
- "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
- An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
- A "Combined Work" is a work produced by combining or linking an
-Application with the Library. The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
- The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
- The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
- 1. Exception to Section 3 of the GNU GPL.
-
- You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
- 2. Conveying Modified Versions.
-
- If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
- a) under this License, provided that you make a good faith effort to
- ensure that, in the event an Application does not supply the
- function or data, the facility still operates, and performs
- whatever part of its purpose remains meaningful, or
-
- b) under the GNU GPL, with none of the additional permissions of
- this License applicable to that copy.
-
- 3. Object Code Incorporating Material from Library Header Files.
-
- The object code form of an Application may incorporate material from
-a header file that is part of the Library. You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
- a) Give prominent notice with each copy of the object code that the
- Library is used in it and that the Library and its use are
- covered by this License.
-
- b) Accompany the object code with a copy of the GNU GPL and this license
- document.
-
- 4. Combined Works.
-
- You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
- a) Give prominent notice with each copy of the Combined Work that
- the Library is used in it and that the Library and its use are
- covered by this License.
-
- b) Accompany the Combined Work with a copy of the GNU GPL and this license
- document.
-
- c) For a Combined Work that displays copyright notices during
- execution, include the copyright notice for the Library among
- these notices, as well as a reference directing the user to the
- copies of the GNU GPL and this license document.
-
- d) Do one of the following:
-
- 0) Convey the Minimal Corresponding Source under the terms of this
- License, and the Corresponding Application Code in a form
- suitable for, and under terms that permit, the user to
- recombine or relink the Application with a modified version of
- the Linked Version to produce a modified Combined Work, in the
- manner specified by section 6 of the GNU GPL for conveying
- Corresponding Source.
-
- 1) Use a suitable shared library mechanism for linking with the
- Library. A suitable mechanism is one that (a) uses at run time
- a copy of the Library already present on the user's computer
- system, and (b) will operate properly with a modified version
- of the Library that is interface-compatible with the Linked
- Version.
-
- e) Provide Installation Information, but only if you would otherwise
- be required to provide such information under section 6 of the
- GNU GPL, and only to the extent that such information is
- necessary to install and execute a modified version of the
- Combined Work produced by recombining or relinking the
- Application with a modified version of the Linked Version. (If
- you use option 4d0, the Installation Information must accompany
- the Minimal Corresponding Source and Corresponding Application
- Code. If you use option 4d1, you must provide the Installation
- Information in the manner specified by section 6 of the GNU GPL
- for conveying Corresponding Source.)
-
- 5. Combined Libraries.
-
- You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
- a) Accompany the combined library with a copy of the same work based
- on the Library, uncombined with any other library facilities,
- conveyed under the terms of this License.
-
- b) Give prominent notice with the combined library that part of it
- is a work based on the Library, and explaining where to find the
- accompanying uncombined form of the same work.
-
- 6. Revised Versions of the GNU Lesser General Public License.
-
- The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
- Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
- If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.
diff --git a/WiringPi/examples/Gertboard/7segments.c b/WiringPi/examples/Gertboard/7segments.c
deleted file mode 100644
index 8797e49..0000000
--- a/WiringPi/examples/Gertboard/7segments.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * 7segments.c:
- * Simple test program to see if we can drive a 7-segment LED
- * display using the GPIO and little else on the Raspberry Pi
- *
- * Copyright (c) 2013 Gordon Henderson
- ***********************************************************************
- */
-
-#undef PHOTO_HACK
-
-#include
-
-#include
-#include
-#include
-#include
-
-/*
- * Segment mapping
- *
- * --a--
- * | |
- * f b
- * | |
- * --g--
- * | |
- * e c
- * | |
- * --d-- p
- */
-
-// GPIO Pin Mapping
-
-static int digits [6] = { 7, 11, 10, 13, 12, 14 } ;
-static int segments [7] = { 6, 5, 4, 3, 2, 1, 0 } ;
-
-
-static const int segmentDigits [] =
-{
-// a b c d e f g Segments
-// 6 5 4 3 2 1 0, // wiringPi pin No.
-
- 1, 1, 1, 1, 1, 1, 0, // 0
- 0, 1, 1, 0, 0, 0, 0, // 1
- 1, 1, 0, 1, 1, 0, 1, // 2
- 1, 1, 1, 1, 0, 0, 1, // 3
- 0, 1, 1, 0, 0, 1, 1, // 4
- 1, 0, 1, 1, 0, 1, 1, // 5
- 1, 0, 1, 1, 1, 1, 1, // 6
- 1, 1, 1, 0, 0, 0, 0, // 7
- 1, 1, 1, 1, 1, 1, 1, // 8
- 1, 1, 1, 1, 0, 1, 1, // 9
- 1, 1, 1, 0, 1, 1, 1, // A
- 0, 0, 1, 1, 1, 1, 1, // b
- 1, 0, 0, 1, 1, 1, 0, // C
- 0, 1, 1, 1, 1, 0, 1, // d
- 1, 0, 0, 1, 1, 1, 1, // E
- 1, 0, 0, 0, 1, 1, 1, // F
- 0, 0, 0, 0, 0, 0, 0, // blank
-} ;
-
-
-// display:
-// A global variable which is written to by the main program and
-// read from by the thread that updates the display. Only the first
-// 6 characters are used.
-
-char display [8] ;
-
-
-/*
- * displayDigits:
- * This is our thread that's run concurrently with the main program.
- * Essentially sit in a loop, parsing and displaying the data held in
- * the "display" global.
- *********************************************************************************
- */
-
-PI_THREAD (displayDigits)
-{
- int digit, segment ;
- int index, d, segVal ;
-
- piHiPri (50) ;
-
- for (;;)
- {
- for (digit = 0 ; digit < 6 ; ++digit)
- {
- for (segment = 0 ; segment < 7 ; ++segment)
- {
- d = toupper (display [digit]) ;
- /**/ if ((d >= '0') && (d <= '9')) // Digit
- index = d - '0' ;
- else if ((d >= 'A') && (d <= 'F')) // Hex
- index = d - 'A' + 10 ;
- else
- index = 16 ; // Blank
-
- segVal = segmentDigits [index * 7 + segment] ;
-
- digitalWrite (segments [segment], segVal) ;
- }
- digitalWrite (digits [digit], 1) ;
- delay (2) ;
- digitalWrite (digits [digit], 0) ;
- }
- }
-}
-
-
-/*
- * setup:
- * Initialise the hardware and start the thread
- *********************************************************************************
- */
-
-void setup (void)
-{
- int i, c ;
-
- wiringPiSetup () ;
-
-// 7 segments
-
- for (i = 0 ; i < 7 ; ++i)
- { digitalWrite (segments [i], 0) ; pinMode (segments [i], OUTPUT) ; }
-
-// 6 digits
-
- for (i = 0 ; i < 6 ; ++i)
- { digitalWrite (digits [i], 0) ; pinMode (digits [i], OUTPUT) ; }
-
- strcpy (display, " ") ;
- piThreadCreate (displayDigits) ;
- delay (10) ; // Just to make sure it's started
-
-// Quick countdown LED test sort of thing
-
- c = 999999 ;
- for (i = 0 ; i < 10 ; ++i)
- {
- sprintf (display, "%06d", c) ;
- delay (400) ;
- c -= 111111 ;
- }
-
- strcpy (display, " ") ;
- delay (400) ;
-
-#ifdef PHOTO_HACK
- sprintf (display, "%s", "123456") ;
- for (;;)
- delay (1000) ;
-#endif
-
-}
-
-
-/*
- * teenager:
- * No explanation needed. (Nor one given!)
- *********************************************************************************
- */
-
-void teenager (void)
-{
- char *message = " feedbeef babe cafe b00b " ;
- int i ;
-
- for (i = 0 ; i < strlen (message) - 4 ; ++i)
- {
- strncpy (display, &message [i], 6) ;
- delay (200) ;
- }
- delay (1000) ;
- for (i = 0 ; i < 3 ; ++i)
- {
- strcpy (display, " ") ;
- delay (150) ;
- strcpy (display, " b00b ") ;
- delay (250) ;
- }
- delay (1000) ;
- strcpy (display, " ") ;
- delay (1000) ;
-}
-
-
-/*
- *********************************************************************************
- * main:
- * Let the fun begin
- *********************************************************************************
- */
-
-int main (void)
-{
- struct tm *t ;
- time_t tim ;
-
- setup () ;
- teenager () ;
-
- tim = time (NULL) ;
- for (;;)
- {
- while (time (NULL) == tim)
- delay (5) ;
-
- tim = time (NULL) ;
- t = localtime (&tim) ;
-
- sprintf (display, "%02d%02d%02d", t->tm_hour, t->tm_min, t->tm_sec) ;
-
- delay (500) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/Gertboard/Makefile b/WiringPi/examples/Gertboard/Makefile
deleted file mode 100644
index 7569261..0000000
--- a/WiringPi/examples/Gertboard/Makefile
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-# Makefile:
-# Gertboard - Examples using wiringPi
-#
-# Copyright (c) 2013 Gordon Henderson
-#################################################################################
-
-#DEBUG = -g -O0
-DEBUG = -O3
-CC = gcc
-INCLUDE = -I/usr/local/include
-CFLAGS = $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
-
-LDFLAGS = -L/usr/local/lib
-LDLIBS = -lwiringPi -lwiringPiDev -lpthread -lm
-
-# Should not alter anything below this line
-###############################################################################
-
-SRC = gertboard.c \
- buttons.c 7segments.c \
- voltmeter.c temperature.c vumeter.c \
- record.c
-
-OBJ = $(SRC:.c=.o)
-
-BINS = $(SRC:.c=)
-
-all: $(BINS)
-
-gertboard: gertboard.o
- @echo [link]
- @$(CC) -o $@ gertboard.o $(LDFLAGS) $(LDLIBS)
-
-buttons: buttons.o
- @echo [link]
- @$(CC) -o $@ buttons.o $(LDFLAGS) $(LDLIBS)
-
-7segments: 7segments.o
- @echo [link]
- @$(CC) -o $@ 7segments.o $(LDFLAGS) $(LDLIBS)
-
-voltmeter: voltmeter.o
- @echo [link]
- @$(CC) -o $@ voltmeter.o $(LDFLAGS) $(LDLIBS)
-
-temperature: temperature.o
- @echo [link]
- @$(CC) -o $@ temperature.o $(LDFLAGS) $(LDLIBS)
-
-vumeter: vumeter.o
- @echo [link]
- @$(CC) -o $@ vumeter.o $(LDFLAGS) $(LDLIBS)
-
-record: record.o
- @echo [link]
- @$(CC) -o $@ record.o $(LDFLAGS) $(LDLIBS)
-
-.c.o:
- @echo [CC] $<
- @$(CC) -c $(CFLAGS) $< -o $@
-
-clean:
- @echo [Clean]
- @rm -f $(OBJ) *~ core tags $(BINS)
-
-tags: $(SRC)
- @echo [ctags]
- @ctags $(SRC)
-
-depend:
- makedepend -Y $(SRC)
-
-# DO NOT DELETE
diff --git a/WiringPi/examples/Gertboard/buttons.c b/WiringPi/examples/Gertboard/buttons.c
deleted file mode 100644
index 5f76764..0000000
--- a/WiringPi/examples/Gertboard/buttons.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * buttons.c:
- * Read the Gertboard buttons. Each one will act as an on/off
- * tiggle switch for 3 different LEDs
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-// Array to keep track of our LEDs
-
-int leds [] = { 0, 0, 0 } ;
-
-// scanButton:
-// See if a button is pushed, if so, then flip that LED and
-// wait for the button to be let-go
-
-void scanButton (int button)
-{
- if (digitalRead (button) == HIGH) // Low is pushed
- return ;
-
- leds [button] ^= 1 ; // Invert state
- digitalWrite (4 + button, leds [button]) ;
-
- while (digitalRead (button) == LOW) // Wait for release
- delay (10) ;
-}
-
-int main (void)
-{
- int i ;
-
- printf ("Raspberry Pi Gertboard Button Test\n") ;
-
- wiringPiSetup () ;
-
-// Setup the outputs:
-// Pins 3, 4, 5, 6 and 7 output:
-// We're not using 3 or 4, but make sure they're off anyway
-// (Using same hardware config as blink12.c)
-
- for (i = 3 ; i < 8 ; ++i)
- {
- pinMode (i, OUTPUT) ;
- digitalWrite (i, 0) ;
- }
-
-// Setup the inputs
-
- for (i = 0 ; i < 3 ; ++i)
- {
- pinMode (i, INPUT) ;
- pullUpDnControl (i, PUD_UP) ;
- leds [i] = 0 ;
- }
-
- for (;;)
- {
- for (i = 0 ; i < 3 ; ++i)
- scanButton (i) ;
- delay (1) ;
- }
-}
diff --git a/WiringPi/examples/Gertboard/gertboard.c b/WiringPi/examples/Gertboard/gertboard.c
deleted file mode 100644
index aefcb12..0000000
--- a/WiringPi/examples/Gertboard/gertboard.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * gertboard.c:
- * Simple test for the SPI bus on the Gertboard
- *
- * Hardware setup:
- * D/A port 0 jumpered to A/D port 0.
- *
- * We output a sine wave on D/A port 0 and sample A/D port 0. We then
- * plot the input value on the terminal as a sort of vertical scrolling
- * oscilloscipe.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-
-// Gertboard D to A is an 8-bit unit.
-
-#define B_SIZE 256
-
-#include
-#include
-
-int main (void)
-{
- double angle ;
- int i, inputValue ;
- int buffer [B_SIZE] ;
- int cols ;
- struct winsize w ;
-
-
- printf ("Raspberry Pi Gertboard SPI test program\n") ;
- printf ("=======================================\n") ;
-
- ioctl (fileno (stdin), TIOCGWINSZ, &w);
- cols = w.ws_col - 2 ;
-
-// Always initialise wiringPi. Use wiringPiSys() if you don't need
-// (or want) to run as root
-
- wiringPiSetupSys () ;
-
-// Initialise the Gertboard analog hardware at pin 100
-
- gertboardAnalogSetup (100) ;
-
-// Generate a Sine Wave and store in our buffer
-
- for (i = 0 ; i < B_SIZE ; ++i)
- {
- angle = ((double)i / (double)B_SIZE) * M_PI * 2.0 ;
- buffer [i] = (int)rint ((sin (angle)) * 127.0 + 128.0) ;
- }
-
-// Loop, output the sine wave on analog out port 0, read it into A-D port 0
-// and display it on the screen
-
- for (;;)
- {
- for (i = 0 ; i < B_SIZE ; ++i)
- {
- analogWrite (100, buffer [i]) ;
-
- inputValue = analogRead (100) ;
-
-// We don't need to wory about the scale or sign - the analog hardware is
-// a 10-bit value, so 0-1023. Just scale this to our terminal
-
- printf ("%*s\n", (inputValue * cols) / 1023, "*") ;
- delay (2) ;
- }
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/Gertboard/record.c b/WiringPi/examples/Gertboard/record.c
deleted file mode 100644
index 71d8718..0000000
--- a/WiringPi/examples/Gertboard/record.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * record.c:
- * Record some audio via the Gertboard
- *
- * Copyright (c) 2013 Gordon Henderson
- ***********************************************************************
- */
-
-#include
-#include
-
-#include
-#include
-
-#define B_SIZE 40000
-
-int main ()
-{
- int i ;
- struct timeval tStart, tEnd, tTaken ;
- unsigned char buffer [B_SIZE] ;
-
- printf ("\n") ;
- printf ("Gertboard demo: Recorder\n") ;
- printf ("========================\n") ;
-
-// Always initialise wiringPi. Use wiringPiSys() if you don't need
-// (or want) to run as root
-
- wiringPiSetupSys () ;
-
-// Initialise the Gertboard analog hardware at pin 100
-
- gertboardAnalogSetup (100) ;
-
- gettimeofday (&tStart, NULL) ;
-
- for (i = 0 ; i < B_SIZE ; ++i)
- buffer [i] = analogRead (100) >> 2 ;
-
- gettimeofday (&tEnd, NULL) ;
-
- timersub (&tEnd, &tStart, &tTaken) ;
-
- printf ("Time taken for %d reads: %ld.%ld\n", B_SIZE, tTaken.tv_sec, tTaken.tv_usec) ;
-
- gettimeofday (&tStart, NULL) ;
-
- for (i = 0 ; i < B_SIZE ; ++i)
- analogWrite (100, buffer [i]) ;
-
- gettimeofday (&tEnd, NULL) ;
-
- timersub (&tEnd, &tStart, &tTaken) ;
-
- printf ("Time taken for %d writes: %ld.%ld\n", B_SIZE, tTaken.tv_sec, tTaken.tv_usec) ;
-
- return 0 ;
-}
-
diff --git a/WiringPi/examples/Gertboard/temperature.c b/WiringPi/examples/Gertboard/temperature.c
deleted file mode 100644
index 5985a12..0000000
--- a/WiringPi/examples/Gertboard/temperature.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * temperature.c:
- * Demonstrate use of the Gertboard A to D converter to make
- * a simple thermometer using the LM35.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-
-#include
-#include
-
-int main ()
-{
- int x1, x2 ;
- double v1, v2 ;
-
- printf ("\n") ;
- printf ("Gertboard demo: Simple Thermemeter\n") ;
- printf ("==================================\n") ;
-
-// Always initialise wiringPi. Use wiringPiSys() if you don't need
-// (or want) to run as root
-
- wiringPiSetupSys () ;
-
-// Initialise the Gertboard analog hardware at pin 100
-
- gertboardAnalogSetup (100) ;
-
- printf ("\n") ;
- printf ("| Channel 0 | Channel 1 | Temperature 1 | Temperature 2 |\n") ;
-
- for (;;)
- {
-
-// Read the 2 channels:
-
- x1 = analogRead (100) ;
- x2 = analogRead (101) ;
-
-// Convert to a voltage:
-
- v1 = (double)x1 / 1023.0 * 3.3 ;
- v2 = (double)x2 / 1023.0 * 3.3 ;
-
-// Print
-
- printf ("| %6.3f | %6.3f |", v1, v2) ;
-
-// Print Temperature of both channels by converting the LM35 reading
-// to a temperature. Fortunately these are easy: 0.01 volts per C.
-
- printf (" %4.1f | %4.1f |\r", v1 * 100.0, v2 * 100.0) ;
- fflush (stdout) ;
- }
-
- return 0 ;
-}
-
diff --git a/WiringPi/examples/Gertboard/voltmeter.c b/WiringPi/examples/Gertboard/voltmeter.c
deleted file mode 100644
index c4d2113..0000000
--- a/WiringPi/examples/Gertboard/voltmeter.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * voltmeter.c:
- * Demonstrate use of the Gertboard A to D converter to make
- * a simple voltmeter.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-
-#include
-#include
-
-int main ()
-{
- int x1, x2 ;
- double v1, v2 ;
-
- printf ("\n") ;
- printf ("Gertboard demo: Simple Voltmeters\n") ;
- printf ("=================================\n") ;
-
-// Always initialise wiringPi. Use wiringPiSys() if you don't need
-// (or want) to run as root
-
- wiringPiSetupSys () ;
-
-// Initialise the Gertboard analog hardware at pin 100
-
- gertboardAnalogSetup (100) ;
-
- printf ("\n") ;
- printf ("| Channel 0 | Channel 1 |\n") ;
-
- for (;;)
- {
-
-// Read the 2 channels:
-
- x1 = analogRead (100) ;
- x2 = analogRead (101) ;
-
-// Convert to a voltage:
-
- v1 = (double)x1 / 1023.0 * 3.3 ;
- v2 = (double)x2 / 1023.0 * 3.3 ;
-
-// Print
-
- printf ("| %6.3f | %6.3f |\r", v1, v2) ;
- fflush (stdout) ;
- }
-
- return 0 ;
-}
-
diff --git a/WiringPi/examples/Gertboard/vumeter.c b/WiringPi/examples/Gertboard/vumeter.c
deleted file mode 100644
index 9643ace..0000000
--- a/WiringPi/examples/Gertboard/vumeter.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * vumeter.c:
- * Simple VU meter
- *
- * Heres the theory:
- * We will sample at 4000 samples/sec and put the data into a
- * low-pass filter with a depth of 1000 samples. This will give
- * us 1/4 a second of lag on the signal, but I think it might
- * produce a more pleasing output.
- *
- * The input of the microphone should be at mid-pont with no
- * sound input, but we might have to sample that too, to get
- * our reference zero...
- *
- * Copyright (c) 2013 Gordon Henderson
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-
-#ifndef TRUE
-#define TRUE (1==1)
-#define FALSE (!TRUE)
-#endif
-
-#define B_SIZE 1000
-#define S_SIZE 128
-
-static int buffer [B_SIZE] ;
-static int bPtr = 0 ;
-
-/*
- * ledPercent:
- * Output the given value as a percentage on the LEDs
- *********************************************************************************
- */
-
-static void ledPercent (int percent)
-{
- unsigned int output = 0 ;
-
- if (percent > 11) output |= 0x01 ;
- if (percent > 22) output |= 0x02 ;
- if (percent > 33) output |= 0x04 ;
- if (percent > 44) output |= 0x08 ;
- if (percent > 55) output |= 0x10 ;
- if (percent > 66) output |= 0x20 ;
- if (percent > 77) output |= 0x40 ;
- if (percent > 88) output |= 0x80 ;
-
- digitalWriteByte (output) ;
-}
-
-static unsigned int tPeriod, tNextSampleTime ;
-
-/*
- * sample:
- * Get a sample from the Gertboard. If not enough time has elapsed
- * since the last sample, then wait...
- *********************************************************************************
- */
-
-static void sample (void)
-{
- unsigned int tFuture ;
-
-// Calculate the future sample time
-
- tFuture = tPeriod + tNextSampleTime ;
-
-// Wait until the next sample time
-
- while (micros () < tNextSampleTime)
- ;
-
- buffer [bPtr] = gertboardAnalogRead (0) ;
-
- tNextSampleTime = tFuture ;
-}
-
-
-int main ()
-{
- int quietLevel, min, max ;
- int i, sum ;
- unsigned int tStart, tEnd ;
-
- printf ("\n") ;
- printf ("Gertboard demo: VU Meter\n") ;
- printf ("========================\n") ;
-
- wiringPiSetup () ;
- gertboardSPISetup () ;
-
- ledPercent (0) ;
- for (i = 0 ; i < 8 ; ++i)
- pinMode (i, OUTPUT) ;
-
- for (bPtr = 0 ; bPtr < B_SIZE ; ++bPtr)
- buffer [bPtr] = 99 ;
-
- tPeriod = 1000000 / 1000 ;
-
- printf ("Shhhh.... ") ; fflush (stdout) ;
- delay (1000) ;
- printf ("Sampling quiet... ") ; fflush (stdout) ;
-
- tStart = micros () ;
-
- tNextSampleTime = micros () ;
- for (bPtr = 0 ; bPtr < B_SIZE ; ++bPtr)
- sample () ;
-
- tEnd = micros () ;
-
- quietLevel = 0 ;
- max = 0 ;
- min = 1024 ;
- for (i = 0 ; i < B_SIZE ; ++i)
- {
- quietLevel += buffer [i] ;
- if (buffer [i] > max) max = buffer [i] ;
- if (buffer [i] < min) min = buffer [i] ;
- }
- quietLevel /= B_SIZE ;
-
- printf ("Done. Quiet level is: %d [%d:%d] [%d:%d]\n", quietLevel, min, max, quietLevel - min, max - quietLevel) ;
-
- printf ("Time taken for %d reads: %duS\n", B_SIZE, tEnd - tStart) ;
-
- for (bPtr = 0 ;;)
- {
- sample () ;
- sum = 0 ;
- for (i = 0 ; i < S_SIZE ; ++i)
- sum += buffer [i] ;
- sum /= S_SIZE ;
- sum = abs (quietLevel - sum) ;
- sum = (sum * 1000) / quietLevel ;
- ledPercent (sum) ;
- if (++bPtr > S_SIZE)
- bPtr = 0 ;
- }
-
-
- return 0 ;
-}
diff --git a/WiringPi/examples/Makefile b/WiringPi/examples/Makefile
deleted file mode 100644
index c9967dc..0000000
--- a/WiringPi/examples/Makefile
+++ /dev/null
@@ -1,168 +0,0 @@
-#
-# Makefile:
-# wiringPi - Wiring Compatable library for the Raspberry Pi
-# https://projects.drogon.net/wiring-pi
-#
-# Copyright (c) 2012 Gordon Henderson
-#################################################################################
-# This file is part of wiringPi:
-# Wiring Compatable library for the Raspberry Pi
-#
-# wiringPi is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# wiringPi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with wiringPi. If not, see .
-#################################################################################
-
-
-#DEBUG = -g -O0
-DEBUG = -O3
-CC = gcc
-INCLUDE = -I/usr/local/include
-CFLAGS = $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
-
-LDFLAGS = -L/usr/local/lib
-LDLIBS = -lwiringPi -lwiringPiDev -lpthread -lm
-
-# Should not alter anything below this line
-###############################################################################
-
-SRC = blink.c blink8.c blink12.c \
- blink12drcs.c \
- pwm.c \
- speed.c wfi.c isr.c isr-osc.c \
- lcd.c lcd-adafruit.c clock.c \
- nes.c \
- softPwm.c softTone.c \
- delayTest.c serialRead.c serialTest.c okLed.c ds1302.c \
- lowPower.c \
- rht03.c piglow.c
-
-OBJ = $(SRC:.c=.o)
-
-BINS = $(SRC:.c=)
-
-all:
- @cat README.TXT
- @echo " $(BINS)" | fmt
- @echo ""
-
-really-all: $(BINS)
-
-blink: blink.o
- @echo [link]
- @$(CC) -o $@ blink.o $(LDFLAGS) $(LDLIBS)
-
-blink8: blink8.o
- @echo [link]
- @$(CC) -o $@ blink8.o $(LDFLAGS) $(LDLIBS)
-
-blink12drcs: blink12drcs.o
- @echo [link]
- @$(CC) -o $@ blink12drcs.o $(LDFLAGS) $(LDLIBS)
-
-blink12: blink12.o
- @echo [link]
- @$(CC) -o $@ blink12.o $(LDFLAGS) $(LDLIBS)
-
-speed: speed.o
- @echo [link]
- @$(CC) -o $@ speed.o $(LDFLAGS) $(LDLIBS)
-
-lcd: lcd.o
- @echo [link]
- @$(CC) -o $@ lcd.o $(LDFLAGS) $(LDLIBS)
-
-lcd-adafruit: lcd-adafruit.o
- @echo [link]
- @$(CC) -o $@ lcd-adafruit.o $(LDFLAGS) $(LDLIBS)
-
-clock: clock.o
- @echo [link]
- @$(CC) -o $@ clock.o $(LDFLAGS) $(LDLIBS)
-
-wfi: wfi.o
- @echo [link]
- @$(CC) -o $@ wfi.o $(LDFLAGS) $(LDLIBS)
-
-isr: isr.o
- @echo [link]
- @$(CC) -o $@ isr.o $(LDFLAGS) $(LDLIBS)
-
-isr-osc: isr-osc.o
- @echo [link]
- @$(CC) -o $@ isr-osc.o $(LDFLAGS) $(LDLIBS)
-
-nes: nes.o
- @echo [link]
- @$(CC) -o $@ nes.o $(LDFLAGS) $(LDLIBS)
-
-rht03: rht03.o
- @echo [link]
- @$(CC) -o $@ rht03.o $(LDFLAGS) $(LDLIBS)
-
-pwm: pwm.o
- @echo [link]
- @$(CC) -o $@ pwm.o $(LDFLAGS) $(LDLIBS)
-
-softPwm: softPwm.o
- @echo [link]
- @$(CC) -o $@ softPwm.o $(LDFLAGS) $(LDLIBS)
-
-softTone: softTone.o
- @echo [link]
- @$(CC) -o $@ softTone.o $(LDFLAGS) $(LDLIBS)
-
-delayTest: delayTest.o
- @echo [link]
- @$(CC) -o $@ delayTest.o $(LDFLAGS) $(LDLIBS)
-
-serialRead: serialRead.o
- @echo [link]
- @$(CC) -o $@ serialRead.o $(LDFLAGS) $(LDLIBS)
-
-serialTest: serialTest.o
- @echo [link]
- @$(CC) -o $@ serialTest.o $(LDFLAGS) $(LDLIBS)
-
-okLed: okLed.o
- @echo [link]
- @$(CC) -o $@ okLed.o $(LDFLAGS) $(LDLIBS)
-
-tone: tone.o
- @echo [link]
- @$(CC) -o $@ tone.o $(LDFLAGS) $(LDLIBS)
-
-ds1302: ds1302.o
- @echo [link]
- @$(CC) -o $@ ds1302.o $(LDFLAGS) $(LDLIBS)
-
-piglow: piglow.o
- @echo [link]
- @$(CC) -o $@ piglow.o $(LDFLAGS) $(LDLIBS)
-
-
-.c.o:
- @echo [CC] $<
- @$(CC) -c $(CFLAGS) $< -o $@
-
-clean:
- @echo "[Clean]"
- @rm -f $(OBJ) *~ core tags $(BINS)
-
-tags: $(SRC)
- @echo [ctags]
- @ctags $(SRC)
-
-depend:
- makedepend -Y $(SRC)
-
-# DO NOT DELETE
diff --git a/WiringPi/examples/PiFace/Makefile b/WiringPi/examples/PiFace/Makefile
deleted file mode 100644
index 0bde334..0000000
--- a/WiringPi/examples/PiFace/Makefile
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile:
-# wiringPi - Wiring Compatable library for the Raspberry Pi
-# https://projects.drogon.net/wiring-pi
-#
-# Copyright (c) 2012 Gordon Henderson
-#################################################################################
-# This file is part of wiringPi:
-# Wiring Compatable library for the Raspberry Pi
-#
-# wiringPi is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# wiringPi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with wiringPi. If not, see .
-#################################################################################
-
-
-#DEBUG = -g -O0
-DEBUG = -O3
-CC = gcc
-INCLUDE = -I/usr/local/include
-CFLAGS = $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
-
-LDFLAGS = -L/usr/local/lib
-LDLIBS = -lwiringPi -lwiringPiDev -lpthread -lm
-
-# Should not alter anything below this line
-###############################################################################
-
-SRC = blink.c buttons.c reaction.c ladder.c metro.c motor.c
-
-OBJ = $(SRC:.c=.o)
-
-BINS = $(SRC:.c=)
-
-all: $(BINS)
-
-blink: blink.o
- @echo [link]
- @$(CC) -o $@ blink.o $(LDFLAGS) $(LDLIBS)
-
-buttons: buttons.o
- @echo [link]
- @$(CC) -o $@ buttons.o $(LDFLAGS) $(LDLIBS)
-
-reaction: reaction.o
- @echo [link]
- @$(CC) -o $@ reaction.o $(LDFLAGS) $(LDLIBS)
-
-ladder: ladder.o
- @echo [link]
- @$(CC) -o $@ ladder.o $(LDFLAGS) $(LDLIBS)
-
-metro: metro.o
- @echo [link]
- @$(CC) -o $@ metro.o $(LDFLAGS) $(LDLIBS)
-
-motor: motor.o
- @echo [link]
- @$(CC) -o $@ motor.o $(LDFLAGS) $(LDLIBS)
-
-.c.o:
- @echo [CC] $<
- @$(CC) -c $(CFLAGS) $< -o $@
-
-clean:
- @echo "[Clean]"
- @rm -f $(OBJ) *~ core tags $(BINS)
-
-tags: $(SRC)
- @echo [ctags]
- @ctags $(SRC)
-
-depend:
- makedepend -Y $(SRC)
-
-# DO NOT DELETE
diff --git a/WiringPi/examples/PiFace/blink.c b/WiringPi/examples/PiFace/blink.c
deleted file mode 100644
index ffb8a2e..0000000
--- a/WiringPi/examples/PiFace/blink.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * blink.c:
- * Simple "blink" test for the PiFace interface board.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-
-#include
-#include
-
-// Use 200 as the pin-base for the PiFace board, and pick a pin
-// for the LED that's not connected to a relay
-
-#define PIFACE 200
-#define LED (PIFACE+2)
-
-int main (int argc, char *argv [])
-{
- printf ("Raspberry Pi PiFace Blink\n") ;
- printf ("=========================\n") ;
-
-// Always initialise wiringPi. Use wiringPiSys() if you don't need
-// (or want) to run as root
-
- wiringPiSetupSys () ;
-
-// Setup the PiFace board
-
- piFaceSetup (PIFACE) ;
-
- for (;;)
- {
- digitalWrite (LED, HIGH) ; // On
- delay (500) ; // mS
- digitalWrite (LED, LOW) ; // Off
- delay (500) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/PiFace/buttons.c b/WiringPi/examples/PiFace/buttons.c
deleted file mode 100644
index 147a4bd..0000000
--- a/WiringPi/examples/PiFace/buttons.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * buttons.c:
- * Simple test for the PiFace interface board.
- *
- * Read the buttons and output the same to the LEDs
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-
-#include
-#include
-
-int outputs [4] = { 0,0,0,0 } ;
-
-// Use 200 as the pin-base for the PiFace board
-
-#define PIFACE_BASE 200
-
-
-/*
- * scanButton:
- * Read the guiven button - if it's pressed, then flip the state
- * of the correspoinding output pin
- *********************************************************************************
- */
-
-void scanButton (int button)
-{
- if (digitalRead (PIFACE_BASE + button) == LOW)
- {
- outputs [button] ^= 1 ;
- digitalWrite (PIFACE_BASE + button, outputs [button]) ;
- printf ("Button %d pushed - output now: %s\n",
- button, (outputs [button] == 0) ? "Off" : "On") ;
- }
-
- while (digitalRead (PIFACE_BASE + button) == LOW)
- delay (1) ;
-}
-
-
-/*
- * start here
- *********************************************************************************
- */
-
-int main (void)
-{
- int pin, button ;
-
- printf ("Raspberry Pi wiringPi + PiFace test program\n") ;
- printf ("===========================================\n") ;
- printf ("\n") ;
- printf (
-"This program reads the buttons and uses them to toggle the first 4\n"
-"outputs. Push a button once to turn an output on, and push it again to\n"
-"turn it off again.\n\n") ;
-
-// Always initialise wiringPi. Use wiringPiSys() if you don't need
-// (or want) to run as root
-
- wiringPiSetupSys () ;
-
- piFaceSetup (PIFACE_BASE) ;
-
-// Enable internal pull-ups & start with all off
-
- for (pin = 0 ; pin < 8 ; ++pin)
- {
- pullUpDnControl (PIFACE_BASE + pin, PUD_UP) ;
- digitalWrite (PIFACE_BASE + pin, 0) ;
- }
-
-// Loop, scanning the buttons
-
- for (;;)
- {
- for (button = 0 ; button < 4 ; ++button)
- scanButton (button) ;
- delay (5) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/PiFace/ladder.c b/WiringPi/examples/PiFace/ladder.c
deleted file mode 100755
index 4f08a6f..0000000
--- a/WiringPi/examples/PiFace/ladder.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * ladder.c:
- *
- * Gordon Henderson, June 2012
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-
-#include
-#include
-
-#ifndef TRUE
-# define TRUE (1==1)
-# define FALSE (1==2)
-#endif
-
-#undef DEBUG
-
-#define NUM_LEDS 8
-
-
-// Map the LEDs to the hardware pins
-// using PiFace pin numbers here
-
-#define PIFACE 200
-
-const int ledMap [NUM_LEDS] =
-{
-// 0, 1, 2, 3, 4, 5, 6, 7, 8
- 200, 201, 202, 203, 204, 205, 206, 207
-} ;
-
-
-// Some constants for our circuit simulation
-
-const double vBatt = 9.0 ; // Volts (ie. a PP3)
-const double capacitor = 0.001 ; // 1000uF
-const double rCharge = 2200.0 ; // ohms
-const double rDischarge = 68000.0 ; // ohms
-const double timeInc = 0.01 ; // Seconds
-
-double vCharge, vCap, vCapLast ;
-
-
-
-/*
- * setup:
- * Program the GPIO correctly and initialise the lamps
- ***********************************************************************
- */
-
-void setup (void)
-{
- int i ;
-
- wiringPiSetupSys () ;
-
- if (piFaceSetup (200) == -1)
- exit (1) ;
-
-// Enable internal pull-ups
-
- for (i = 0 ; i < 8 ; ++i)
- pullUpDnControl (PIFACE + i, PUD_UP) ;
-
-// Calculate the actual charging voltage - standard calculation of
-// vCharge = r2 / (r1 + r2) * vBatt
-//
-//
-// -----+--- vBatt
-// |
-// R1
-// |
-// +---+---- vCharge
-// | |
-// R2 C
-// | |
-// -----+---+-----
-
- vCharge = rDischarge / (rCharge + rDischarge) * vBatt ;
-
-// Start with no charge
-
- vCap = vCapLast = 0.0 ;
-}
-
-
-/*
- * introLeds
- * Put a little pattern on the LEDs to start with
- *********************************************************************************
- */
-
-void introLeds (void)
-{
- int i, j ;
-
-
- printf ("Pi Ladder\n") ;
- printf ("=========\n\n") ;
- printf (" vBatt: %6.2f volts\n", vBatt) ;
- printf (" rCharge: %6.0f ohms\n", rCharge) ;
- printf (" rDischarge: %6.0f ohms\n", rDischarge) ;
- printf (" vCharge: %6.2f volts\n", vCharge) ;
- printf (" capacitor: %6.0f uF\n", capacitor * 1000.0) ;
-
-// Flash 3 times:
-
- for (j = 0 ; j < 3 ; ++j)
- {
- for (i = 0 ; i < NUM_LEDS ; ++i)
- digitalWrite (ledMap [i], 1) ;
- delay (500) ;
- for (i = 0 ; i < NUM_LEDS ; ++i)
- digitalWrite (ledMap [i], 0) ;
- delay (100) ;
- }
-
-// All On
-
- for (i = 0 ; i < NUM_LEDS ; ++i)
- digitalWrite (ledMap [i], 1) ;
- delay (500) ;
-
-// Countdown...
-
- for (i = NUM_LEDS - 1 ; i >= 0 ; --i)
- {
- digitalWrite (ledMap [i], 0) ;
- delay (100) ;
- }
- delay (500) ;
-}
-
-
-/*
- * winningLeds
- * Put a little pattern on the LEDs to start with
- *********************************************************************************
- */
-
-void winningLeds (void)
-{
- int i, j ;
-
-// Flash 3 times:
-
- for (j = 0 ; j < 3 ; ++j)
- {
- for (i = 0 ; i < NUM_LEDS ; ++i)
- digitalWrite (ledMap [i], 1) ;
- delay (500) ;
- for (i = 0 ; i < NUM_LEDS ; ++i)
- digitalWrite (ledMap [i], 0) ;
- delay (100) ;
- }
-
-// All On
-
- for (i = 0 ; i < NUM_LEDS ; ++i)
- digitalWrite (ledMap [i], 1) ;
- delay (500) ;
-
-// Countup...
-
- for (i = 0 ; i < NUM_LEDS ; ++i)
- {
- digitalWrite (ledMap [i], 0) ;
- delay (100) ;
- }
- delay (500) ;
-}
-
-
-/*
- * chargeCapacitor: dischargeCapacitor:
- * Add or remove charge to the capacitor.
- * Standard capacitor formulae.
- *********************************************************************************
- */
-
-void chargeCapacitor (void)
-{
- vCap = (vCapLast - vCharge) *
- exp (- timeInc / (rCharge * capacitor)) + vCharge ;
-
-#ifdef DEBUG
- printf ("+vCap: %7.4f\n", vCap) ;
-#endif
-
- vCapLast = vCap ;
-}
-
-void dischargeCapacitor (void)
-{
- vCap = vCapLast *
- exp (- timeInc / (rDischarge * capacitor)) ;
-
-#ifdef DEBUG
- printf ("-vCap: %7.4f\n", vCap) ;
-#endif
-
- vCapLast = vCap ;
-}
-
-
-/*
- * ledBargraph:
- * Output the supplied number as a bargraph on the LEDs
- *********************************************************************************
- */
-
-void ledBargraph (double value, int topLedOn)
-{
- int topLed = (int)floor (value / vCharge * (double)NUM_LEDS) + 1 ;
- int i ;
-
- if (topLed > NUM_LEDS)
- topLed = NUM_LEDS ;
-
- if (!topLedOn)
- --topLed ;
-
- for (i = 0 ; i < topLed ; ++i)
- digitalWrite (ledMap [i], 1) ;
-
- for (i = topLed ; i < NUM_LEDS ; ++i)
- digitalWrite (ledMap [i], 0) ;
-}
-
-
-/*
- * ledOnAction:
- * Make sure the leading LED is on and check the button
- *********************************************************************************
- */
-
-void ledOnAction (void)
-{
- if (digitalRead (PIFACE) == LOW)
- {
- chargeCapacitor () ;
- ledBargraph (vCap, TRUE) ;
- }
-}
-
-
-/*
- * ledOffAction:
- * Make sure the leading LED is off and check the button
- *********************************************************************************
- */
-
-void ledOffAction (void)
-{
- dischargeCapacitor () ;
-
-// Are we still pushing the button?
-
- if (digitalRead (PIFACE) == LOW)
- {
- vCap = vCapLast = 0.0 ;
- ledBargraph (vCap, FALSE) ;
-
-// Wait until we release the button
-
- while (digitalRead (PIFACE) == LOW)
- delay (10) ;
- }
-}
-
-
-/*
- ***********************************************************************
- * The main program
- ***********************************************************************
- */
-
-int main (void)
-{
- unsigned int then, ledOnTime, ledOffTime ;
- unsigned int ourDelay = (int)(1000.0 * timeInc) ;
-
- setup () ;
- introLeds () ;
-
-// Setup the LED times - TODO reduce the ON time as the game progresses
-
- ledOnTime = 1000 ;
- ledOffTime = 1000 ;
-
-// This is our Gate/Squarewave loop
-
- for (;;)
- {
-
-// LED ON:
-
- (void)ledBargraph (vCap, TRUE) ;
- then = millis () + ledOnTime ;
- while (millis () < then)
- {
- ledOnAction () ;
- delay (ourDelay) ;
- }
-
-// Have we won yet?
-// We need vCap to be in the top NUM_LEDS of the vCharge
-
- if (vCap > ((double)(NUM_LEDS - 1) / (double)NUM_LEDS * vCharge)) // Woo hoo!
- {
- winningLeds () ;
- while (digitalRead (PIFACE) == HIGH)
- delay (10) ;
- while (digitalRead (PIFACE) == LOW)
- delay (10) ;
- vCap = vCapLast = 0.0 ;
- }
-
-// LED OFF:
-
- (void)ledBargraph (vCap, FALSE) ;
- then = millis () + ledOffTime ;
- while (millis () < then)
- {
- ledOffAction () ;
- delay (ourDelay) ;
- }
-
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/PiFace/metro.c b/WiringPi/examples/PiFace/metro.c
deleted file mode 100644
index a4a8c1d..0000000
--- a/WiringPi/examples/PiFace/metro.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * metronome.c:
- * Simple test for the PiFace interface board.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-
-#define PIFACE 200
-
-/*
- * middleA:
- * Play middle A (on the relays - yea!)
- *********************************************************************************
- */
-
-static void middleA (void)
-{
- unsigned int next ;
-
- for (;;)
- {
- next = micros () + 1136 ;
- digitalWrite (PIFACE + 0, 0) ;
- digitalWrite (PIFACE + 1, 0) ;
- while (micros () < next)
- delayMicroseconds (1) ;
-
- next = micros () + 1137 ;
- digitalWrite (PIFACE + 0, 1) ;
- digitalWrite (PIFACE + 1, 1) ;
- while (micros () < next)
- delayMicroseconds (1) ;
-
- }
-}
-
-
-int main (int argc, char *argv [])
-{
- int bpm, msPerBeat, state = 0 ;
- unsigned int end ;
-
- printf ("Raspberry Pi PiFace Metronome\n") ;
- printf ("=============================\n") ;
-
- piHiPri (50) ;
-
- wiringPiSetupSys () ; // Needed for timing functions
- piFaceSetup (PIFACE) ;
-
- if (argc != 2)
- {
- printf ("Usage: %s \n", argv [0]) ;
- exit (1) ;
- }
-
- if (strcmp (argv [1], "a") == 0)
- middleA () ;
-
- bpm = atoi (argv [1]) ;
-
- if ((bpm < 40) || (bpm > 208))
- {
- printf ("%s range is 40 through 208 beats per minute\n", argv [0]) ;
- exit (1) ;
- }
-
- msPerBeat = 60000 / bpm ;
-
-// Main loop:
-// Put some random LED pairs up for a few seconds, then blank ...
-
- for (;;)
- {
- end = millis () + msPerBeat ;
-
- digitalWrite (PIFACE + 0, state) ;
- digitalWrite (PIFACE + 1, state) ;
-
- while (millis () < end)
- delayMicroseconds (500) ;
-
- state ^= 1 ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/PiFace/motor.c b/WiringPi/examples/PiFace/motor.c
deleted file mode 100644
index 14f5539..0000000
--- a/WiringPi/examples/PiFace/motor.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * motor.c:
- * Use the PiFace board to demonstrate an H bridge
- * circuit via the 2 relays.
- * Then add on an external transsitor to help with PWM.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-#include
-
-int outputs [2] = { 0,0 } ;
-
-#define PIFACE_BASE 200
-#define PWM_OUT_PIN 204
-#define PWM_UP 202
-#define PWM_DOWN 203
-
-void scanButton (int button)
-{
- if (digitalRead (PIFACE_BASE + button) == LOW)
- {
- outputs [button] ^= 1 ;
- digitalWrite (PIFACE_BASE + button, outputs [button]) ;
- printf ("Button %d pushed - output now: %s\n",
- button, (outputs [button] == 0) ? "Off" : "On") ;
- }
-
- while (digitalRead (PIFACE_BASE + button) == LOW)
- delay (1) ;
-}
-
-
-int main (void)
-{
- int pin, button ;
- int pwmValue = 0 ;
-
- printf ("Raspberry Pi PiFace - Motor control\n") ;
- printf ("==================================\n") ;
- printf ("\n") ;
- printf (
-"This program is designed to be used with a motor connected to the relays\n"
-"in an H-Bridge type configuration with optional speeed control via PWM.\n"
-"\n"
-"Use the leftmost buttons to turn each relay on and off, and the rigthmost\n"
-"buttons to increase ot decrease the PWM output on the control pin (pin\n"
-"4)\n\n") ;
-
- wiringPiSetup () ;
- piFaceSetup (PIFACE_BASE) ;
- softPwmCreate (PWM_OUT_PIN, 100, 100) ;
-
-// Enable internal pull-ups & start with all off
-
- for (pin = 0 ; pin < 8 ; ++pin)
- {
- pullUpDnControl (PIFACE_BASE + pin, PUD_UP) ;
- digitalWrite (PIFACE_BASE + pin, 0) ;
- }
-
- for (;;)
- {
- for (button = 0 ; button < 2 ; ++button)
- scanButton (button) ;
-
- if (digitalRead (PWM_UP) == LOW)
- {
- pwmValue += 10 ;
- if (pwmValue > 100)
- pwmValue = 100 ;
-
- softPwmWrite (PWM_OUT_PIN, pwmValue) ;
- printf ("PWM -> %3d\n", pwmValue) ;
-
- while (digitalRead (PWM_UP) == LOW)
- delay (5) ;
- }
-
- if (digitalRead (PWM_DOWN) == LOW)
- {
- pwmValue -= 10 ;
- if (pwmValue < 0)
- pwmValue = 0 ;
-
- softPwmWrite (PWM_OUT_PIN, pwmValue) ;
- printf ("PWM -> %3d\n", pwmValue) ;
-
- while (digitalRead (PWM_DOWN) == LOW)
- delay (5) ;
- }
-
- delay (5) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/PiFace/reaction.c b/WiringPi/examples/PiFace/reaction.c
deleted file mode 100644
index 5084508..0000000
--- a/WiringPi/examples/PiFace/reaction.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * reaction.c:
- * Simple test for the PiFace interface board.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-
-
-int outputs [4] = { 0,0,0,0 } ;
-
-#define PIFACE 200
-
-/*
- * light:
- * Light up the given LED - actually lights up a pair
- *********************************************************************************
- */
-
-void light (int led, int value)
-{
- led *= 2 ;
- digitalWrite (PIFACE + led + 0, value) ;
- digitalWrite (PIFACE + led + 1, value) ;
-}
-
-/*
- * lightAll:
- * All On or Off
- *********************************************************************************
- */
-
-void lightAll (int onoff)
-{
- light (0, onoff) ;
- light (1, onoff) ;
- light (2, onoff) ;
- light (3, onoff) ;
-}
-
-
-/*
- * waitForNoButtons:
- * Wait for all buttons to be released
- *********************************************************************************
- */
-
-void waitForNoButtons (void)
-{
- int i, button ;
-
- for (;;)
- {
- button = 0 ;
- for (i = 0 ; i < 4 ; ++i)
- button += digitalRead (PIFACE + i) ;
-
- if (button == 4)
- break ;
- }
-}
-
-
-void scanButton (int button)
-{
- if (digitalRead (PIFACE + button) == LOW)
- {
- outputs [button] ^= 1 ;
- digitalWrite (PIFACE + button, outputs [button]) ;
- }
-
- while (digitalRead (PIFACE + button) == LOW)
- delay (1) ;
-}
-
-
-int main (void)
-{
- int i, j ;
- int led, button ;
- unsigned int start, stop ;
-
- printf ("Raspberry Pi PiFace Reaction Timer\n") ;
- printf ("==================================\n") ;
-
- if (piFaceSetup (PIFACE) == -1)
- exit (1) ;
-
-// Enable internal pull-ups
-
- for (i = 0 ; i < 8 ; ++i)
- pullUpDnControl (PIFACE + i, PUD_UP) ;
-
-
-// Main game loop:
-// Put some random LED pairs up for a few seconds, then blank ...
-
- for (;;)
- {
- printf ("Press any button to start ... \n") ; fflush (stdout) ;
-
- for (;;)
- {
- led = rand () % 4 ;
- light (led, 1) ;
- delay (10) ;
- light (led, 0) ;
-
- button = 0 ;
- for (j = 0 ; j < 4 ; ++j)
- button += digitalRead (PIFACE + j) ;
-
- if (button != 4)
- break ;
- }
-
- waitForNoButtons () ;
-
- printf ("Wait for it ... ") ; fflush (stdout) ;
-
- led = rand () % 4 ;
- delay (rand () % 500 + 1000) ;
- light (led, 1) ;
-
- start = millis () ;
- for (button = -1 ; button == -1 ; )
- {
- for (j = 0 ; j < 4 ; ++j)
- if (digitalRead (PIFACE + j) == 0) // Pushed
- {
- button = j ;
- break ;
- }
- }
- stop = millis () ;
- button = 3 - button ; // Correct for the buttons/LEDs reversed
-
- light (led, 0) ;
-
- waitForNoButtons () ;
-
- light (led, 1) ;
-
- if (button == led)
- {
- printf ("You got it in %3d mS\n", stop - start) ;
- }
- else
- {
- printf ("Missed: You pushed %d - LED was %d\n", button, led) ;
- for (;;)
- {
- light (button, 1) ;
- delay (100) ;
- light (button, 0) ;
- delay (100) ;
- i = 0 ;
- for (j = 0 ; j < 4 ; ++j)
- i += digitalRead (PIFACE + j) ;
- if (i != 4)
- break ;
- }
-
- waitForNoButtons () ;
- }
- light (led, 0) ;
- delay (4000) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/PiGlow/Makefile b/WiringPi/examples/PiGlow/Makefile
deleted file mode 100644
index 8d31141..0000000
--- a/WiringPi/examples/PiGlow/Makefile
+++ /dev/null
@@ -1,79 +0,0 @@
-#
-# Makefile:
-# wiringPi - Wiring Compatable library for the Raspberry Pi
-# https://projects.drogon.net/wiring-pi
-#
-# Copyright (c) 2012-2013 Gordon Henderson
-#################################################################################
-# This file is part of wiringPi:
-# Wiring Compatable library for the Raspberry Pi
-#
-# wiringPi is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# wiringPi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with wiringPi. If not, see .
-#################################################################################
-
-
-#DEBUG = -g -O0
-DEBUG = -O3
-CC = gcc
-INCLUDE = -I/usr/local/include
-CFLAGS = $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
-
-LDFLAGS = -L/usr/local/lib
-LDLIBS = -lwiringPi -lwiringPiDev -lpthread -lm
-
-# Should not alter anything below this line
-###############################################################################
-
-SRC = piGlow0.c piGlow1.c piglow.c
-
-OBJ = $(SRC:.c=.o)
-
-BINS = $(SRC:.c=)
-
-all: $(BINS)
-
-piGlow0: piGlow0.o
- @echo [link]
- @$(CC) -o $@ piGlow0.o $(LDFLAGS) $(LDLIBS)
-
-piGlow1: piGlow1.o
- @echo [link]
- @$(CC) -o $@ piGlow1.o $(LDFLAGS) $(LDLIBS)
-
-piglow: piglow.o
- @echo [link]
- @$(CC) -o $@ piglow.o $(LDFLAGS) $(LDLIBS)
-
-.c.o:
- @echo [CC] $<
- @$(CC) -c $(CFLAGS) $< -o $@
-
-clean:
- @echo "[Clean]"
- @rm -f $(OBJ) *~ core tags $(BINS)
-
-tags: $(SRC)
- @echo [ctags]
- @ctags $(SRC)
-
-install: piglow
- @echo Installing piglow into /usr/local/bin
- @cp -a piglow /usr/local/bin/piglow
- @chmod 755 /usr/local/bin/piglow
- @echo Done. Remember to load the I2C drivers!
-
-depend:
- makedepend -Y $(SRC)
-
-# DO NOT DELETE
diff --git a/WiringPi/examples/PiGlow/piGlow0.c b/WiringPi/examples/PiGlow/piGlow0.c
deleted file mode 100644
index d3fe4b9..0000000
--- a/WiringPi/examples/PiGlow/piGlow0.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * piglow.c:
- * Very simple demonstration of the PiGlow board.
- * This uses the SN3218 directly - soon there will be a new PiGlow
- * devLib device which will handle the PiGlow board on a more easy
- * to use manner...
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-#define LED_BASE 533
-
-int main (void)
-{
- int i, j ;
-
- wiringPiSetupSys () ;
-
- sn3218Setup (LED_BASE) ;
-
- for (;;)
- {
- for (i = 0 ; i < 256 ; ++i)
- for (j = 0 ; j < 18 ; ++j)
- analogWrite (LED_BASE + j, i) ;
-
- for (i = 255 ; i >= 0 ; --i)
- for (j = 0 ; j < 18 ; ++j)
- analogWrite (LED_BASE + j, i) ;
- }
-}
diff --git a/WiringPi/examples/PiGlow/piGlow1.c b/WiringPi/examples/PiGlow/piGlow1.c
deleted file mode 100644
index a00b31e..0000000
--- a/WiringPi/examples/PiGlow/piGlow1.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * piGlow1.c:
- * Very simple demonstration of the PiGlow board.
- * This uses the piGlow devLib.
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-
-#define PIGLOW_BASE 533
-
-#ifndef TRUE
-# define TRUE (1==1)
-# define FALSE (!TRUE)
-#endif
-
-
-/*
- * keypressed: clearKeypressed:
- * Simple but effective ways to tell if the enter key has been pressed
- *********************************************************************************
- */
-
-static int keypressed (void)
-{
- struct pollfd polls ;
-
- polls.fd = fileno (stdin) ;
- polls.events = POLLIN ;
-
- return poll (&polls, 1, 0) != 0 ;
-}
-
-static void clearKeypressed (void)
-{
- while (keypressed ())
- (void)getchar () ;
-}
-
-
-/*
- * pulseLed:
- * Pulses the LED at position leg, ring from off to a max. value,
- * then off again
- *********************************************************************************
- */
-
-static void pulseLed (int leg, int ring)
-{
- int i ;
-
- for (i = 0 ; i < 140 ; ++i)
- {
- piGlow1 (leg, ring, i) ;
- delay (1) ;
- }
- delay (10) ;
- for (i = 140 ; i >= 0 ; --i)
- {
- piGlow1 (leg, ring, i) ;
- delay (1) ;
- }
-}
-
-/*
- * pulseLeg:
- * Same as above, but a whole leg at a time
- *********************************************************************************
- */
-
-static void pulseLeg (int leg)
-{
- int i ;
-
- for (i = 0 ; i < 140 ; ++i)
- {
- piGlowLeg (leg, i) ; delay (1) ;
- }
- delay (10) ;
- for (i = 140 ; i >= 0 ; --i)
- {
- piGlowLeg (leg, i) ; delay (1) ;
- }
-}
-
-
-/*
- * pulse Ring:
- * Same as above, but a whole ring at a time
- *********************************************************************************
- */
-
-static void pulseRing (int ring)
-{
- int i ;
-
- for (i = 0 ; i < 140 ; ++i)
- {
- piGlowRing (ring, i) ; delay (1) ;
- }
- delay (10) ;
- for (i = 140 ; i >= 0 ; --i)
- {
- piGlowRing (ring, i) ; delay (1) ;
- }
-}
-
-#define LEG_STEPS 3
-
-static int legSequence [] =
-{
- 4, 12, 99,
- 99, 4, 12,
- 12, 99, 4,
-} ;
-
-
-#define RING_STEPS 16
-
-static int ringSequence [] =
-{
- 0, 0, 0, 0, 0, 64,
- 0, 0, 0, 0, 64, 64,
- 0, 0, 0, 64, 64, 0,
- 0, 0, 64, 64, 0, 0,
- 0, 64, 64, 0, 0, 0,
- 64, 64, 0, 0, 0, 0,
- 64, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0,
- 64, 0, 0, 0, 0, 0,
- 64, 64, 0, 0, 0, 0,
- 0, 64, 64, 0, 0, 0,
- 0, 0, 64, 64, 0, 0,
- 0, 0, 0, 64, 64, 0,
- 0, 0, 0, 0, 64, 64,
- 0, 0, 0, 0, 0, 64,
- 0, 0, 0, 0, 0, 0,
-} ;
-
-/*
- * main:
- * Our little demo prgoram
- *********************************************************************************
- */
-
-int main (void)
-{
- int i ;
- int step, ring, leg ;
-
-// Always initialise wiringPi:
-// Use the Sys method if you don't need to run as root
-
- wiringPiSetupSys () ;
-
-// Initialise the piGlow devLib with our chosen pin base
-
- piGlowSetup (1) ;
-
-// LEDs, one at a time
-
- printf ("LEDs, one at a time\n") ;
- for (; !keypressed () ;)
- for (leg = 0 ; leg < 3 ; ++leg)
- {
- for (ring = 0 ; ring < 6 ; ++ring)
- {
- pulseLed (leg, ring) ;
- if (keypressed ())
- break ;
- }
- if (keypressed ())
- break ;
- }
- clearKeypressed () ;
-
-// Rings, one at a time
-
- printf ("Rings, one at a time\n") ;
- for (; !keypressed () ;)
- for (ring = 0 ; ring < 6 ; ++ring)
- {
- pulseRing (ring) ;
- if (keypressed ())
- break ;
- }
- clearKeypressed () ;
-
-// Legs, one at a time
-
- printf ("Legs, one at a time\n") ;
- for (; !keypressed () ;)
- for (leg = 0 ; leg < 3 ; ++leg)
- {
- pulseLeg (leg) ;
- if (keypressed ())
- break ;
- }
- clearKeypressed () ;
-
- delay (1000) ;
-
-// Sequence - alternating rings, legs and random
-
- printf ("Sequence now\n") ;
- for (; !keypressed () ;)
- {
- for (i = 0 ; i < 20 ; ++i)
- for (step = 0 ; step < LEG_STEPS ; ++step)
- {
- for (leg = 0 ; leg < 3 ; ++leg)
- piGlowLeg (leg, legSequence [step * 3 + leg]) ;
- delay (80) ;
- }
-
- for (i = 0 ; i < 10 ; ++i)
- for (step = 0 ; step < RING_STEPS ; ++step)
- {
- for (ring = 0 ; ring < 6 ; ++ring)
- piGlowRing (ring, ringSequence [step * 6 + ring]) ;
- delay (80) ;
- }
-
- for (i = 0 ; i < 1000 ; ++i)
- {
- leg = random () % 3 ;
- ring = random () % 6 ;
- piGlow1 (leg, ring, random () % 256) ;
- delay (5) ;
- piGlow1 (leg, ring, 0) ;
- }
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/PiGlow/piglow.c b/WiringPi/examples/PiGlow/piglow.c
deleted file mode 100644
index e6a2db3..0000000
--- a/WiringPi/examples/PiGlow/piglow.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * piglow.c:
- * Very simple demonstration of the PiGlow board.
- * This uses the piGlow devLib.
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#ifndef TRUE
-# define TRUE (1==1)
-# define FALSE (!TRUE)
-#endif
-
-#include
-#include
-
-static void failUsage (void)
-{
- fprintf (stderr, "Usage examples:\n") ;
- fprintf (stderr, " piglow off # All off\n") ;
- fprintf (stderr, " piglow red 50 # Light the 3 red LEDs to 50%%\n") ;
- fprintf (stderr, " colours are: red, yellow, orange, green, blue and white\n") ;
- fprintf (stderr, " piglow all 75 # Light all to 75%%\n") ;
- fprintf (stderr, " piglow leg 0 25 # Light leg 0 to 25%%\n") ;
- fprintf (stderr, " piglow ring 3 100 # Light ring 3 to 100%%\n") ;
- fprintf (stderr, " piglow led 2 5 100 # Light the single LED on Leg 2, ring 5 to 100%%\n") ;
-
- exit (EXIT_FAILURE) ;
-}
-
-static int getPercent (char *typed)
-{
- int percent ;
-
- percent = atoi (typed) ;
- if ((percent < 0) || (percent > 100))
- {
- fprintf (stderr, "piglow: percent value out of range\n") ;
- exit (EXIT_FAILURE) ;
- }
- return (percent * 255) / 100 ;
-}
-
-
-/*
- * main:
- * Our little demo prgoram
- *********************************************************************************
- */
-
-int main (int argc, char *argv [])
-{
- int percent ;
- int ring, leg ;
-
-// Always initialise wiringPi:
-// Use the Sys method if you don't need to run as root
-
- wiringPiSetupSys () ;
-
-// Initialise the piGlow devLib
-
- piGlowSetup (FALSE) ;
-
- if (argc == 1)
- failUsage () ;
-
- if ((argc == 2) && (strcasecmp (argv [1], "off") == 0))
- {
- for (leg = 0 ; leg < 3 ; ++leg)
- piGlowLeg (leg, 0) ;
- return 0 ;
- }
-
- if (argc == 3)
- {
- percent = getPercent (argv [2]) ;
-
- /**/ if (strcasecmp (argv [1], "red") == 0)
- piGlowRing (PIGLOW_RED, percent) ;
- else if (strcasecmp (argv [1], "yellow") == 0)
- piGlowRing (PIGLOW_YELLOW, percent) ;
- else if (strcasecmp (argv [1], "orange") == 0)
- piGlowRing (PIGLOW_ORANGE, percent) ;
- else if (strcasecmp (argv [1], "green") == 0)
- piGlowRing (PIGLOW_GREEN, percent) ;
- else if (strcasecmp (argv [1], "blue") == 0)
- piGlowRing (PIGLOW_BLUE, percent) ;
- else if (strcasecmp (argv [1], "white") == 0)
- piGlowRing (PIGLOW_WHITE, percent) ;
- else if (strcasecmp (argv [1], "all") == 0)
- for (ring = 0 ; ring < 6 ; ++ring)
- piGlowRing (ring, percent) ;
- else
- {
- fprintf (stderr, "piglow: invalid colour\n") ;
- exit (EXIT_FAILURE) ;
- }
- return 0 ;
- }
-
- if (argc == 4)
- {
- /**/ if (strcasecmp (argv [1], "leg") == 0)
- {
- leg = atoi (argv [2]) ;
- if ((leg < 0) || (leg > 2))
- {
- fprintf (stderr, "piglow: leg value out of range\n") ;
- exit (EXIT_FAILURE) ;
- }
- percent = getPercent (argv [3]) ;
- piGlowLeg (leg, percent) ;
- }
- else if (strcasecmp (argv [1], "ring") == 0)
- {
- ring = atoi (argv [2]) ;
- if ((ring < 0) || (ring > 5))
- {
- fprintf (stderr, "piglow: ring value out of range\n") ;
- exit (EXIT_FAILURE) ;
- }
- percent = getPercent (argv [3]) ;
- piGlowRing (ring, percent) ;
- }
- return 0 ;
- }
-
- if (argc == 5)
- {
- if (strcasecmp (argv [1], "led") != 0)
- failUsage () ;
-
- leg = atoi (argv [2]) ;
- if ((leg < 0) || (leg > 2))
- {
- fprintf (stderr, "piglow: leg value out of range\n") ;
- exit (EXIT_FAILURE) ;
- }
- ring = atoi (argv [3]) ;
- if ((ring < 0) || (ring > 5))
- {
- fprintf (stderr, "piglow: ring value out of range\n") ;
- exit (EXIT_FAILURE) ;
- }
- percent = getPercent (argv [4]) ;
- piGlow1 (leg, ring, percent) ;
- return 0 ;
- }
-
- failUsage () ;
- return 0 ;
-}
-
-
diff --git a/WiringPi/examples/README.TXT b/WiringPi/examples/README.TXT
deleted file mode 100644
index 33263b1..0000000
--- a/WiringPi/examples/README.TXT
+++ /dev/null
@@ -1,18 +0,0 @@
-
-wiringPi Examples
-=================
-
-There are now too many examples to compile them all in a sensible time,
-and you probably don't want to compile or run them all anyway, so they
-have been separated out.
-
-To compile an individual example, just type
-
- make exampleName
-
-To really compile everything:
-
- make really-all
-
-The individual tests are:
-
diff --git a/WiringPi/examples/blink.c b/WiringPi/examples/blink.c
deleted file mode 100644
index c27a20e..0000000
--- a/WiringPi/examples/blink.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * blink.c:
- * Standard "blink" program in wiringPi. Blinks an LED connected
- * to the first GPIO pin.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-// LED Pin - wiringPi pin 0 is BCM_GPIO 17.
-
-#define LED 0
-
-int main (void)
-{
- printf ("Raspberry Pi blink\n") ;
-
- wiringPiSetup () ;
- pinMode (LED, OUTPUT) ;
-
- for (;;)
- {
- digitalWrite (LED, HIGH) ; // On
- delay (500) ; // mS
- digitalWrite (LED, LOW) ; // Off
- delay (500) ;
- }
- return 0 ;
-}
diff --git a/WiringPi/examples/blink.rtb b/WiringPi/examples/blink.rtb
deleted file mode 100644
index eb7d26c..0000000
--- a/WiringPi/examples/blink.rtb
+++ /dev/null
@@ -1,30 +0,0 @@
-// blink.rtb:
-// Blink program in Return to Basic
-//
-// Copyright (c) 2012-2013 Gordon Henderson.
-//**********************************************************************
-// This file is part of wiringPi:
-// https://projects.drogon.net/raspberry-pi/wiringpi/
-//
-// wiringPi is free software: you can redistribute it and/or modify
-// it under the terms of the GNU Lesser General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// wiringPi is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public License
-// along with wiringPi. If not, see .
- ***********************************************************************
-//
-PinMode (0, 1) // Output
-CYCLE
- DigitalWrite (0, 1) // Pin 0 ON
- WAIT (0.5) // 0.5 seconds
- DigitalWrite (0, 0)
- WAIT (0.5)
-REPEAT
-END
diff --git a/WiringPi/examples/blink.sh b/WiringPi/examples/blink.sh
deleted file mode 100644
index 7755383..0000000
--- a/WiringPi/examples/blink.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# blink.sh:
-# Standard "blink" program in wiringPi. Blinks an LED connected
-# to the first GPIO pin.
-#
-# Copyright (c) 2012-2013 Gordon Henderson.
-#######################################################################
-# This file is part of wiringPi:
-# https://projects.drogon.net/raspberry-pi/wiringpi/
-#
-# wiringPi is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# wiringPi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with wiringPi. If not, see .
-#######################################################################
-
-# LED Pin - wiringPi pin 0 is BCM_GPIO 17.
-
-PIN=0
-
-gpio mode $PIN out
-
-while true; do
- gpio write $PIN 1
- sleep 0.5
- gpio write $PIN 0
- sleep 0.5
-done
diff --git a/WiringPi/examples/blink12.c b/WiringPi/examples/blink12.c
deleted file mode 100644
index c9b3d50..0000000
--- a/WiringPi/examples/blink12.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * blink12.c:
- * Simple sequence over the first 12 GPIO pins - LEDs
- * Aimed at the Gertboard, but it's fairly generic.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-// Simple sequencer data
-// Triplets of LED, On/Off and delay
-
-int data [] =
-{
- 0, 1, 1,
- 1, 1, 1,
- 0, 0, 0, 2, 1, 1,
- 1, 0, 0, 3, 1, 1,
- 2, 0, 0, 4, 1, 1,
- 3, 0, 0, 5, 1, 1,
- 4, 0, 0, 6, 1, 1,
- 5, 0, 0, 7, 1, 1,
- 6, 0, 0, 11, 1, 1,
- 7, 0, 0, 10, 1, 1,
- 11, 0, 0, 13, 1, 1,
- 10, 0, 0, 12, 1, 1,
- 13, 0, 1,
- 12, 0, 1,
-
- 0, 0, 1, // Extra delay
-
-// Back again
-
- 12, 1, 1,
- 13, 1, 1,
- 12, 0, 0, 10, 1, 1,
- 13, 0, 0, 11, 1, 1,
- 10, 0, 0, 7, 1, 1,
- 11, 0, 0, 6, 1, 1,
- 7, 0, 0, 5, 1, 1,
- 6, 0, 0, 4, 1, 1,
- 5, 0, 0, 3, 1, 1,
- 4, 0, 0, 2, 1, 1,
- 3, 0, 0, 1, 1, 1,
- 2, 0, 0, 0, 1, 1,
- 1, 0, 1,
- 0, 0, 1,
-
- 0, 0, 1, // Extra delay
-
- 0, 9, 0, // End marker
-
-} ;
-
-
-int main (void)
-{
- int pin ;
- int dataPtr ;
- int l, s, d ;
-
- printf ("Raspberry Pi - 12-LED Sequence\n") ;
- printf ("==============================\n") ;
- printf ("\n") ;
- printf ("Connect LEDs up to the first 8 GPIO pins, then pins 11, 10, 13, 12 in\n") ;
- printf (" that order, then sit back and watch the show!\n") ;
-
- wiringPiSetup () ;
-
- for (pin = 0 ; pin < 14 ; ++pin)
- pinMode (pin, OUTPUT) ;
-
- dataPtr = 0 ;
-
- for (;;)
- {
- l = data [dataPtr++] ; // LED
- s = data [dataPtr++] ; // State
- d = data [dataPtr++] ; // Duration (10ths)
-
- if (s == 9) // 9 -> End Marker
- {
- dataPtr = 0 ;
- continue ;
- }
-
- digitalWrite (l, s) ;
- delay (d * 100) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/blink12drcs.c b/WiringPi/examples/blink12drcs.c
deleted file mode 100644
index 6ee11fd..0000000
--- a/WiringPi/examples/blink12drcs.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * blink12drcs.c:
- * Simple sequence over the first 12 GPIO pins - LEDs
- * Aimed at the Gertboard, but it's fairly generic.
- * This version uses DRC totalk to the ATmega on the Gertboard
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#define GERT_BASE 100
-
-static int pinMap [] =
-{
- 0, 1, 2, 3, // Pi Native
- GERT_BASE + 2, GERT_BASE + 3, GERT_BASE + 4, GERT_BASE + 5,
- GERT_BASE + 6, GERT_BASE + 7, GERT_BASE + 8, GERT_BASE + 9,
-} ;
-
-// Simple sequencer data
-// Triplets of LED, On/Off and delay
-
-
-int data [] =
-{
- 0, 1, 1,
- 1, 1, 1,
- 0, 0, 0, 2, 1, 1,
- 1, 0, 0, 3, 1, 1,
- 2, 0, 0, 4, 1, 1,
- 3, 0, 0, 5, 1, 1,
- 4, 0, 0, 6, 1, 1,
- 5, 0, 0, 7, 1, 1,
- 6, 0, 0, 8, 1, 1,
- 7, 0, 0, 9, 1, 1,
- 8, 0, 0, 10, 1, 1,
- 9, 0, 0, 11, 1, 1,
- 10, 0, 1,
- 11, 0, 1,
-
- 0, 0, 1, // Extra delay
-
-// Back again
-
- 11, 1, 1,
- 10, 1, 1,
- 11, 0, 0, 9, 1, 1,
- 10, 0, 0, 8, 1, 1,
- 9, 0, 0, 7, 1, 1,
- 8, 0, 0, 6, 1, 1,
- 7, 0, 0, 5, 1, 1,
- 6, 0, 0, 4, 1, 1,
- 5, 0, 0, 3, 1, 1,
- 4, 0, 0, 2, 1, 1,
- 3, 0, 0, 1, 1, 1,
- 2, 0, 0, 0, 1, 1,
- 1, 0, 1,
- 0, 0, 1,
-
- 0, 0, 1, // Extra delay
-
- 0, 9, 0, // End marker
-
-} ;
-
-
-int main (void)
-{
- int pin ;
- int dataPtr ;
- int l, s, d ;
-
- printf ("Raspberry Pi - 12-LED Sequence\n") ;
- printf ("==============================\n") ;
- printf ("\n") ;
- printf ("Connect LEDs up to the first 4 Pi pins and 8 pins on the ATmega\n") ;
- printf (" from PD2 through PB1 in that order,\n") ;
- printf (" then sit back and watch the show!\n") ;
-
- wiringPiSetup () ;
- drcSetupSerial (GERT_BASE, 20, "/dev/ttyAMA0", 115200) ;
-
- for (pin = 0 ; pin < 12 ; ++pin)
- pinMode (pinMap [pin], OUTPUT) ;
-
- dataPtr = 0 ;
-
- for (;;)
- {
- l = data [dataPtr++] ; // LED
- s = data [dataPtr++] ; // State
- d = data [dataPtr++] ; // Duration (10ths)
-
- if (s == 9) // 9 -> End Marker
- {
- dataPtr = 0 ;
- continue ;
- }
-
- digitalWrite (pinMap [l], s) ;
- delay (d * analogRead (GERT_BASE) / 4) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/blink6drcs.c b/WiringPi/examples/blink6drcs.c
deleted file mode 100644
index 32f4921..0000000
--- a/WiringPi/examples/blink6drcs.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * blink6drcs.c:
- * Simple sequence over 6 pins on a remote DRC board.
- * Aimed at the Gertduino, but it's fairly generic.
- * This version uses DRC to talk to the ATmega on the Gertduino
- *
- * Copyright (c) 2012-2014 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#define GERT_BASE 100
-
-static int pinMap [] =
-{
- GERT_BASE + 6, GERT_BASE + 5, GERT_BASE + 3, GERT_BASE + 10, GERT_BASE + 9, GERT_BASE + 13,
-} ;
-
-// Simple sequencer data
-// Triplets of LED, On/Off and delay
-
-
-int data [] =
-{
- 0, 1, 1,
- 1, 1, 1,
- 0, 0, 0, 2, 1, 1,
- 1, 0, 0, 3, 1, 1,
- 2, 0, 0, 4, 1, 1,
- 3, 0, 0, 5, 1, 1,
- 4, 0, 1,
- 5, 0, 1,
-
- 0, 0, 1, // Extra delay
-
-// Back again
-
- 5, 1, 1,
- 4, 1, 1,
- 5, 0, 0, 3, 1, 1,
- 4, 0, 0, 2, 1, 1,
- 3, 0, 0, 1, 1, 1,
- 2, 0, 0, 0, 1, 1,
- 1, 0, 1,
- 0, 0, 1,
-
- 0, 0, 1, // Extra delay
-
- 0, 9, 0, // End marker
-
-} ;
-
-
-int main (void)
-{
- int pin ;
- int dataPtr ;
- int l, s, d ;
-
- printf ("Raspberry Pi - 6-LED Sequence\n") ;
- printf ("=============================\n") ;
- printf ("\n") ;
- printf (" Use the 2 buttons to temporarily speed up the sequence\n") ;
-
- wiringPiSetupSys () ; // Not using the Pi's GPIO here
- drcSetupSerial (GERT_BASE, 20, "/dev/ttyAMA0", 115200) ;
-
- for (pin = 0 ; pin < 6 ; ++pin)
- pinMode (pinMap [pin], OUTPUT) ;
-
- pinMode (GERT_BASE + 16, INPUT) ; // Buttons
- pinMode (GERT_BASE + 17, INPUT) ;
-
- pullUpDnControl (GERT_BASE + 16, PUD_UP) ;
- pullUpDnControl (GERT_BASE + 17, PUD_UP) ;
-
- dataPtr = 0 ;
-
- for (;;)
- {
- l = data [dataPtr++] ; // LED
- s = data [dataPtr++] ; // State
- d = data [dataPtr++] ; // Duration (10ths)
-
- if (s == 9) // 9 -> End Marker
- {
- dataPtr = 0 ;
- continue ;
- }
-
- digitalWrite (pinMap [l], s) ;
- delay (d * digitalRead (GERT_BASE + 16) * 15 + digitalRead (GERT_BASE + 17) * 20) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/blink8.c b/WiringPi/examples/blink8.c
deleted file mode 100644
index 602d3c0..0000000
--- a/WiringPi/examples/blink8.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * blink8.c:
- * Simple sequence over the first 8 GPIO pins - LEDs
- * Aimed at the Gertboard, but it's fairly generic.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-int main (void)
-{
- int i, led ;
-
- printf ("Raspberry Pi - 8-LED Sequencer\n") ;
- printf ("==============================\n") ;
- printf ("\n") ;
- printf ("Connect LEDs to the first 8 GPIO pins and watch ...\n") ;
-
- wiringPiSetup () ;
-
- for (i = 0 ; i < 8 ; ++i)
- pinMode (i, OUTPUT) ;
-
- for (;;)
- {
- for (led = 0 ; led < 8 ; ++led)
- {
- digitalWrite (led, 1) ;
- delay (100) ;
- }
-
- for (led = 0 ; led < 8 ; ++led)
- {
- digitalWrite (led, 0) ;
- delay (100) ;
- }
- }
-}
diff --git a/WiringPi/examples/clock.c b/WiringPi/examples/clock.c
deleted file mode 100644
index 9a53210..0000000
--- a/WiringPi/examples/clock.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * clock.c:
- * Demo of the 128x64 graphics based LCD driver.
- * This is designed to drive the parallel interface LCD drivers
- * based on the popular 12864H controller chip.
- *
- * This test program assumes the following:
- * (Which is currently hard-wired into the driver)
- *
- * GPIO 0-7 is connected to display data pins 0-7.
- * GPIO 10 is CS1
- * GPIO 11 is CS2
- * GPIO 12 is STROBE
- * GPIO 10 is RS
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-
-#ifndef TRUE
-# define TRUE (1==1)
-# define FALSE (1==2)
-#endif
-
-double clockRadius ;
-double thickness, barLen ;
-int maxX, maxY ;
-
-double rads (double degs)
-{
- return degs * M_PI / 180.0 ;
-}
-
-void drawClockHands (void)
-{
- time_t t ;
- struct tm *now ;
- double angle, p, x0, y0, x1, y1 ;
- int h24, h, m, s ;
- char text [20] ;
-
- time (&t) ;
- now = localtime (&t) ;
-
- h24 = now->tm_hour ;
- m = now->tm_min ;
- s = now->tm_sec ;
-
- h = h24 ;
- if (h > 12)
- h -= 12 ;
-
-// Hour hand
-
- angle = h * 30 + m * 0.5 ;
- x0 = sin (rads (angle)) * (clockRadius * 0.75) ;
- y0 = cos (rads (angle)) * (clockRadius * 0.75) ;
- for (p = -3.0 ; p <= 3.0 ; p += 0.2)
- {
- x1 = sin (rads (angle + p)) * (clockRadius * 0.7) ;
- y1 = cos (rads (angle + p)) * (clockRadius * 0.7) ;
- lcd128x64line (0, 0, x1, y1, 1) ;
- lcd128x64lineTo (x0, y0, 1) ;
- }
-
-// Minute hand
-
- angle = m * 6 ;
- x0 = sin (rads (angle)) * (clockRadius * 0.9) ;
- y0 = cos (rads (angle)) * (clockRadius * 0.9) ;
- for (p = -1.0 ; p <= 1.0 ; p += 0.2)
- {
- x1 = sin (rads (angle + p)) * (clockRadius * 0.85) ;
- y1 = cos (rads (angle + p)) * (clockRadius * 0.85) ;
- lcd128x64line (0, 0, x1, y1, 1) ;
- lcd128x64lineTo (x0, y0, 1) ;
- }
-
-// Second hand
-
- angle = s * 6 ;
- x0 = sin (rads (angle)) * (clockRadius * 0.2) ;
- y0 = cos (rads (angle)) * (clockRadius * 0.2) ;
- x1 = sin (rads (angle)) * (clockRadius * 0.95) ;
- y1 = cos (rads (angle)) * (clockRadius * 0.95) ;
- lcd128x64line (0 - x0, 0 - y0, x1, y1, 1) ;
- lcd128x64circle (0, 0, clockRadius * 0.1, 0, 1) ;
- lcd128x64circle (0, 0, clockRadius * 0.05, 1, 1) ;
-
-// Text:
-
- sprintf (text, "%02d:%02d:%02d", h24, m, s) ;
- lcd128x64puts (32, 24, text, 0, 1) ;
-
- sprintf (text, "%2d/%2d/%2d", now->tm_mday, now->tm_mon + 1, now->tm_year - 100) ;
- lcd128x64puts (32, -23, text, 0, 1) ;
-}
-
-void drawClockFace (void)
-{
- int m ;
- double d, px1, py1, px2, py2 ;
-
- lcd128x64clear (0) ;
- lcd128x64circle (0,0, clockRadius, 1, TRUE) ;
- lcd128x64circle (0,0, clockRadius - thickness, 0, TRUE) ;
-
-// The four big indicators for 12,15,30 and 45
-
- lcd128x64rectangle (- 3, clockRadius - barLen, 3, clockRadius, 1, TRUE) ; // 12
- lcd128x64rectangle (clockRadius - barLen, 3, clockRadius, -3, 1, TRUE) ; // 3
- lcd128x64rectangle (- 3, -clockRadius + barLen, 3, -clockRadius, 1, TRUE) ; // 6
- lcd128x64rectangle (-clockRadius + barLen, 3, -clockRadius, -3, 1, TRUE) ; // 9
-
-
-// Smaller 5 and 1 minute ticks
-
- for (m = 0 ; m < 60 ; ++m)
- {
- px1 = sin (rads (m * 6)) * clockRadius ;
- py1 = cos (rads (m * 6)) * clockRadius ;
- if ((m % 5) == 0)
- d = barLen ;
- else
- d = barLen / 2.0 ;
-
- px2 = sin (rads (m * 6)) * (clockRadius - d) ;
- py2 = cos (rads (m * 6)) * (clockRadius - d) ;
- lcd128x64line (px1, py1, px2, py2, 1) ;
- }
-}
-
-void setup (void)
-{
- lcd128x64getScreenSize (&maxX, &maxY) ;
- clockRadius = maxY / 2 - 1 ;
- thickness = maxX / 48 ;
- barLen = thickness * 4 ;
- lcd128x64setOrigin (32, 32) ;
-}
-
-
-
-
-/*
- ***********************************************************************
- * The main program
- ***********************************************************************
- */
-
-int main (int argc, char *argv [])
-{
- time_t now ;
-
- wiringPiSetup () ;
-
- lcd128x64setup () ;
-
- setup () ;
- for (;;)
- {
- drawClockFace () ;
- drawClockHands () ;
- lcd128x64update () ;
-
- now = time (NULL) ;
- while (time (NULL) == now)
- delay (10) ;
- }
-
-
- return 0 ;
-}
diff --git a/WiringPi/examples/delayTest.c b/WiringPi/examples/delayTest.c
deleted file mode 100644
index 4c8b6ca..0000000
--- a/WiringPi/examples/delayTest.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * delayTest.c:
- * Just a little test program I'm using to experiment with
- * various timings and latency, etc.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-
-#define CYCLES 1000
-
-int main()
-{
- int x ;
- struct timeval t1, t2 ;
- int t ;
- int max, min ;
- int del ;
- int underRuns, overRuns, exactRuns, total ;
- int descheds ;
-
- if (wiringPiSetup () == -1)
- return 1 ;
-
- piHiPri (10) ; sleep (1) ;
-
-// Baseline test
-
- gettimeofday (&t1, NULL) ;
- gettimeofday (&t2, NULL) ;
-
- t = t2.tv_usec - t1.tv_usec ;
- printf ("Baseline test: %d\n", t);
-
- for (del = 1 ; del < 200 ; ++del)
- {
- underRuns = overRuns = exactRuns = total = 0 ;
- descheds = 0 ;
- max = del ;
- min = del ;
-
- for (x = 0 ; x < CYCLES ; ++x)
- {
- for (;;) // Repeat this if we get a delay over 999uS
- { // -> High probability Linux has deschedulled us
- gettimeofday (&t1, NULL) ;
- delayMicroseconds (del) ;
- gettimeofday (&t2, NULL) ;
-
- if (t2.tv_usec < t1.tv_usec) // Counter wrapped
- t = (1000000 + t2.tv_usec) - t1.tv_usec;
- else
- t = t2.tv_usec - t1.tv_usec ;
- if (t > 999)
- {
- ++descheds ;
- continue ;
- }
- else
- break ;
- }
-
- if (t > max)
- {
- max = t ;
- ++overRuns ;
- }
- else if (t < min)
- {
- min = t ;
- ++underRuns ;
- }
- else
- ++exactRuns ;
-
- total += t ;
- }
- printf ("Delay: %3d. Min: %3d, Max: %3d, Unders: %3d, Overs: %3d, Exacts: %3d, Average: %3d, Descheds: %2d\n",
- del, min, max, underRuns, overRuns, exactRuns, total / CYCLES, descheds) ;
- fflush (stdout) ;
- delay (1) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/ds1302.c b/WiringPi/examples/ds1302.c
deleted file mode 100644
index f1e9e20..0000000
--- a/WiringPi/examples/ds1302.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * ds1302.c:
- * Real Time clock
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-
-// Register defines
-
-#define RTC_SECS 0
-#define RTC_MINS 1
-#define RTC_HOURS 2
-#define RTC_DATE 3
-#define RTC_MONTH 4
-#define RTC_DAY 5
-#define RTC_YEAR 6
-#define RTC_WP 7
-#define RTC_TC 8
-#define RTC_BM 31
-
-
-static unsigned int masks [] = { 0x7F, 0x7F, 0x3F, 0x3F, 0x1F, 0x07, 0xFF } ;
-
-
-/*
- * bcdToD: dToBCD:
- * BCD decode/encode
- *********************************************************************************
- */
-
-static int bcdToD (unsigned int byte, unsigned int mask)
-{
- unsigned int b1, b2 ;
- byte &= mask ;
- b1 = byte & 0x0F ;
- b2 = ((byte >> 4) & 0x0F) * 10 ;
- return b1 + b2 ;
-}
-
-static unsigned int dToBcd (unsigned int byte)
-{
- return ((byte / 10) << 4) + (byte % 10) ;
-}
-
-
-/*
- * ramTest:
- * Simple test of the 31 bytes of RAM inside the DS1302 chip
- *********************************************************************************
- */
-
-static int ramTestValues [] =
- { 0x00, 0xFF, 0xAA, 0x55, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00, 0xF0, 0x0F, -1 } ;
-
-static int ramTest (void)
-{
- int addr ;
- int got ;
- int i = 0 ;
- int errors = 0 ;
- int testVal ;
-
- printf ("DS1302 RAM TEST\n") ;
-
- testVal = ramTestValues [i] ;
-
- while (testVal != -1)
- {
- for (addr = 0 ; addr < 31 ; ++addr)
- ds1302ramWrite (addr, testVal) ;
-
- for (addr = 0 ; addr < 31 ; ++addr)
- if ((got = ds1302ramRead (addr)) != testVal)
- {
- printf ("DS1302 RAM Failure: Address: %2d, Expected: 0x%02X, Got: 0x%02X\n",
- addr, testVal, got) ;
- ++errors ;
- }
- testVal = ramTestValues [++i] ;
- }
-
- for (addr = 0 ; addr < 31 ; ++addr)
- ds1302ramWrite (addr, addr) ;
-
- for (addr = 0 ; addr < 31 ; ++addr)
- if ((got = ds1302ramRead (addr)) != addr)
- {
- printf ("DS1302 RAM Failure: Address: %2d, Expected: 0x%02X, Got: 0x%02X\n",
- addr, addr, got) ;
- ++errors ;
- }
-
- if (errors == 0)
- printf ("-- DS1302 RAM TEST: OK\n") ;
- else
- printf ("-- DS1302 RAM TEST FAILURE. %d errors.\n", errors) ;
-
- return 0 ;
-}
-
-/*
- * setLinuxClock:
- * Set the Linux clock from the hardware
- *********************************************************************************
- */
-
-static int setLinuxClock (void)
-{
- char dateTime [20] ;
- char command [64] ;
- int clock [8] ;
-
-
- printf ("Setting the Linux Clock from the DS1302... ") ; fflush (stdout) ;
-
- ds1302clockRead (clock) ;
-
-// [MMDDhhmm[[CC]YY][.ss]]
-
- sprintf (dateTime, "%02d%02d%02d%02d%02d%02d.%02d",
- bcdToD (clock [RTC_MONTH], masks [RTC_MONTH]),
- bcdToD (clock [RTC_DATE], masks [RTC_DATE]),
- bcdToD (clock [RTC_HOURS], masks [RTC_HOURS]),
- bcdToD (clock [RTC_MINS], masks [RTC_MINS]),
- 20,
- bcdToD (clock [RTC_YEAR], masks [RTC_YEAR]),
- bcdToD (clock [RTC_SECS], masks [RTC_SECS])) ;
-
- sprintf (command, "/bin/date %s", dateTime) ;
- system (command) ;
-
- return 0 ;
-}
-
-
-/*
- * setDSclock:
- * Set the DS1302 block from Linux time
- *********************************************************************************
- */
-
-static int setDSclock (void)
-{
- struct tm t ;
- time_t now ;
- int clock [8] ;
-
- printf ("Setting the clock in the DS1302 from Linux time... ") ;
-
- now = time (NULL) ;
- gmtime_r (&now, &t) ;
-
- clock [ 0] = dToBcd (t.tm_sec) ; // seconds
- clock [ 1] = dToBcd (t.tm_min) ; // mins
- clock [ 2] = dToBcd (t.tm_hour) ; // hours
- clock [ 3] = dToBcd (t.tm_mday) ; // date
- clock [ 4] = dToBcd (t.tm_mon + 1) ; // months 0-11 --> 1-12
- clock [ 5] = dToBcd (t.tm_wday + 1) ; // weekdays (sun 0)
- clock [ 6] = dToBcd (t.tm_year - 100) ; // years
- clock [ 7] = 0 ; // W-Protect off
-
- ds1302clockWrite (clock) ;
-
- printf ("OK\n") ;
-
- return 0 ;
-}
-
-
-
-
-int main (int argc, char *argv [])
-{
- int i ;
- int clock [8] ;
-
- wiringPiSetup () ;
- ds1302setup (0, 1, 2) ;
-
- if (argc == 2)
- {
- /**/ if (strcmp (argv [1], "-slc") == 0)
- return setLinuxClock () ;
- else if (strcmp (argv [1], "-sdsc") == 0)
- return setDSclock () ;
- else if (strcmp (argv [1], "-rtest") == 0)
- return ramTest () ;
- else
- {
- printf ("Usage: ds1302 [-slc | -sdsc | -rtest]\n") ;
- return EXIT_FAILURE ;
- }
- }
-
- for (i = 0 ;; ++i)
- {
- printf ("%5d: ", i) ;
-
- ds1302clockRead (clock) ;
- printf (" %2d:%02d:%02d",
- bcdToD (clock [2], masks [2]), bcdToD (clock [1], masks [1]), bcdToD (clock [0], masks [0])) ;
-
- printf (" %2d/%02d/%04d",
- bcdToD (clock [3], masks [3]), bcdToD (clock [4], masks [4]), bcdToD (clock [6], masks [6]) + 2000) ;
-
- printf ("\n") ;
-
- delay (200) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/header.h b/WiringPi/examples/header.h
deleted file mode 100644
index 82f723d..0000000
--- a/WiringPi/examples/header.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * file.c:
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
diff --git a/WiringPi/examples/isr-osc.c b/WiringPi/examples/isr-osc.c
deleted file mode 100644
index a872ee3..0000000
--- a/WiringPi/examples/isr-osc.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * isr-osc.c:
- * Wait for Interrupt test program - ISR method - interrupt oscillator
- *
- * How to test:
- *
- * IMPORTANT: To run this test we connect 2 GPIO pins together, but
- * before we do that YOU must make sure that they are both setup
- * the right way. If they are set to outputs and one is high and one low,
- * then you connect the wire, you'll create a short and that won't be good.
- *
- * Before making the connection, type:
- * gpio mode 0 output
- * gpio write 0 0
- * gpio mode 1 input
- * then you can connect them together.
- *
- * Run the program, then:
- * gpio write 0 1
- * gpio write 0 0
- *
- * at which point it will trigger an interrupt and the program will
- * then do the up/down toggling for itself and run at full speed, and
- * it will report the number of interrupts recieved every second.
- *
- * Copyright (c) 2013 Gordon Henderson. projects@drogon.net
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-#include
-
-
-// What GPIO input are we using?
-// This is a wiringPi pin number
-
-#define OUT_PIN 0
-#define IN_PIN 1
-
-// globalCounter:
-// Global variable to count interrupts
-// Should be declared volatile to make sure the compiler doesn't cache it.
-
-static volatile int globalCounter = 0 ;
-
-/*
- * myInterrupt:
- *********************************************************************************
- */
-
-void myInterrupt (void)
-{
- digitalWrite (OUT_PIN, 1) ;
- ++globalCounter ;
- digitalWrite (OUT_PIN, 0) ;
-}
-
-
-/*
- *********************************************************************************
- * main
- *********************************************************************************
- */
-
-int main (void)
-{
- int myCounter = 0 ;
- int lastCounter = 0 ;
-
- if (wiringPiSetup () < 0)
- {
- fprintf (stderr, "Unable to setup wiringPi: %s\n", strerror (errno)) ;
- return 1 ;
- }
-
- pinMode (OUT_PIN, OUTPUT) ;
- pinMode (IN_PIN, INPUT) ;
-
- if (wiringPiISR (IN_PIN, INT_EDGE_FALLING, &myInterrupt) < 0)
- {
- fprintf (stderr, "Unable to setup ISR: %s\n", strerror (errno)) ;
- return 1 ;
- }
-
- for (;;)
- {
- printf ("Waiting ... ") ; fflush (stdout) ;
-
- while (myCounter == globalCounter)
- delay (1000) ;
-
- printf (" Done. counter: %6d: %6d\n",
- globalCounter, myCounter - lastCounter) ;
- lastCounter = myCounter ;
- myCounter = globalCounter ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/isr.c b/WiringPi/examples/isr.c
deleted file mode 100644
index abc6aec..0000000
--- a/WiringPi/examples/isr.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * isr.c:
- * Wait for Interrupt test program - ISR method
- *
- * How to test:
- * Use the SoC's pull-up and pull down resistors that are avalable
- * on input pins. So compile & run this program (via sudo), then
- * in another terminal:
- * gpio mode 0 up
- * gpio mode 0 down
- * at which point it should trigger an interrupt. Toggle the pin
- * up/down to generate more interrupts to test.
- *
- * Copyright (c) 2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-#include
-
-
-// globalCounter:
-// Global variable to count interrupts
-// Should be declared volatile to make sure the compiler doesn't cache it.
-
-static volatile int globalCounter [8] ;
-
-
-/*
- * myInterrupt:
- *********************************************************************************
- */
-
-void myInterrupt0 (void) { ++globalCounter [0] ; }
-void myInterrupt1 (void) { ++globalCounter [1] ; }
-void myInterrupt2 (void) { ++globalCounter [2] ; }
-void myInterrupt3 (void) { ++globalCounter [3] ; }
-void myInterrupt4 (void) { ++globalCounter [4] ; }
-void myInterrupt5 (void) { ++globalCounter [5] ; }
-void myInterrupt6 (void) { ++globalCounter [6] ; }
-void myInterrupt7 (void) { ++globalCounter [7] ; }
-
-
-/*
- *********************************************************************************
- * main
- *********************************************************************************
- */
-
-int main (void)
-{
- int gotOne, pin ;
- int myCounter [8] ;
-
- for (pin = 0 ; pin < 8 ; ++pin)
- globalCounter [pin] = myCounter [pin] = 0 ;
-
- wiringPiSetup () ;
-
- wiringPiISR (0, INT_EDGE_FALLING, &myInterrupt0) ;
- wiringPiISR (1, INT_EDGE_FALLING, &myInterrupt1) ;
- wiringPiISR (2, INT_EDGE_FALLING, &myInterrupt2) ;
- wiringPiISR (3, INT_EDGE_FALLING, &myInterrupt3) ;
- wiringPiISR (4, INT_EDGE_FALLING, &myInterrupt4) ;
- wiringPiISR (5, INT_EDGE_FALLING, &myInterrupt5) ;
- wiringPiISR (6, INT_EDGE_FALLING, &myInterrupt6) ;
- wiringPiISR (7, INT_EDGE_FALLING, &myInterrupt7) ;
-
- for (;;)
- {
- gotOne = 0 ;
- printf ("Waiting ... ") ; fflush (stdout) ;
-
- for (;;)
- {
- for (pin = 0 ; pin < 8 ; ++pin)
- {
- if (globalCounter [pin] != myCounter [pin])
- {
- printf (" Int on pin %d: Counter: %5d\n", pin, globalCounter [pin]) ;
- myCounter [pin] = globalCounter [pin] ;
- ++gotOne ;
- }
- }
- if (gotOne != 0)
- break ;
- }
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/lcd-adafruit.c b/WiringPi/examples/lcd-adafruit.c
deleted file mode 100644
index 47c9b9b..0000000
--- a/WiringPi/examples/lcd-adafruit.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * lcd-adafruit.c:
- * Text-based LCD driver test code
- * This is designed to drive the Adafruit RGB LCD Plate
- * with the additional 5 buttons for the Raspberry Pi
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-#include
-
-#ifndef TRUE
-# define TRUE (1==1)
-# define FALSE (1==2)
-#endif
-
-
-// Defines for the Adafruit Pi LCD interface board
-
-#define AF_BASE 100
-#define AF_RED (AF_BASE + 6)
-#define AF_GREEN (AF_BASE + 7)
-#define AF_BLUE (AF_BASE + 8)
-
-#define AF_E (AF_BASE + 13)
-#define AF_RW (AF_BASE + 14)
-#define AF_RS (AF_BASE + 15)
-
-#define AF_DB4 (AF_BASE + 12)
-#define AF_DB5 (AF_BASE + 11)
-#define AF_DB6 (AF_BASE + 10)
-#define AF_DB7 (AF_BASE + 9)
-
-#define AF_SELECT (AF_BASE + 0)
-#define AF_RIGHT (AF_BASE + 1)
-#define AF_DOWN (AF_BASE + 2)
-#define AF_UP (AF_BASE + 3)
-#define AF_LEFT (AF_BASE + 4)
-
-
-// User-Defined character test
-
-static unsigned char newChar [8] =
-{
- 0b00100,
- 0b00100,
- 0b00000,
- 0b00100,
- 0b01110,
- 0b11011,
- 0b11011,
- 0b10001,
-} ;
-
-// Global lcd handle:
-
-static int lcdHandle ;
-
-/*
- * usage:
- *********************************************************************************
- */
-
-int usage (const char *progName)
-{
- fprintf (stderr, "Usage: %s colour\n", progName) ;
- return EXIT_FAILURE ;
-}
-
-
-/*
- * scrollMessage:
- *********************************************************************************
- */
-
-static const char *message =
- " "
- "Wiring Pi by Gordon Henderson. HTTP://WIRINGPI.COM/"
- " " ;
-
-void scrollMessage (int line, int width)
-{
- char buf [32] ;
- static int position = 0 ;
- static int timer = 0 ;
-
- if (millis () < timer)
- return ;
-
- timer = millis () + 200 ;
-
- strncpy (buf, &message [position], width) ;
- buf [width] = 0 ;
- lcdPosition (lcdHandle, 0, line) ;
- lcdPuts (lcdHandle, buf) ;
-
- if (++position == (strlen (message) - width))
- position = 0 ;
-}
-
-
-/*
- * setBacklightColour:
- * The colour outputs are inverted.
- *********************************************************************************
- */
-
-static void setBacklightColour (int colour)
-{
- colour &= 7 ;
-
- digitalWrite (AF_RED, !(colour & 1)) ;
- digitalWrite (AF_GREEN, !(colour & 2)) ;
- digitalWrite (AF_BLUE, !(colour & 4)) ;
-}
-
-
-/*
- * adafruitLCDSetup:
- * Setup the Adafruit board by making sure the additional pins are
- * set to the correct modes, etc.
- *********************************************************************************
- */
-
-static void adafruitLCDSetup (int colour)
-{
- int i ;
-
-// Backlight LEDs
-
- pinMode (AF_RED, OUTPUT) ;
- pinMode (AF_GREEN, OUTPUT) ;
- pinMode (AF_BLUE, OUTPUT) ;
- setBacklightColour (colour) ;
-
-// Input buttons
-
- for (i = 0 ; i <= 4 ; ++i)
- {
- pinMode (AF_BASE + i, INPUT) ;
- pullUpDnControl (AF_BASE + i, PUD_UP) ; // Enable pull-ups, switches close to 0v
- }
-
-// Control signals
-
- pinMode (AF_RW, OUTPUT) ; digitalWrite (AF_RW, LOW) ; // Not used with wiringPi - always in write mode
-
-// The other control pins are initialised with lcdInit ()
-
- lcdHandle = lcdInit (2, 16, 4, AF_RS, AF_E, AF_DB4,AF_DB5,AF_DB6,AF_DB7, 0,0,0,0) ;
-
- if (lcdHandle < 0)
- {
- fprintf (stderr, "lcdInit failed\n") ;
- exit (EXIT_FAILURE) ;
- }
-}
-
-
-/*
- * waitForEnter:
- * On the Adafruit display, wait for the select button
- *********************************************************************************
- */
-
-static void waitForEnter (void)
-{
- printf ("Press SELECT to continue: ") ; fflush (stdout) ;
-
- while (digitalRead (AF_SELECT) == HIGH) // Wait for push
- delay (1) ;
-
- while (digitalRead (AF_SELECT) == LOW) // Wait for release
- delay (1) ;
-
- printf ("OK\n") ;
-}
-
-
-/*
- * speedTest:
- * Test the update speed of the display
- *********************************************************************************
- */
-
-static void speedTest (void)
-{
- unsigned int start, end, taken ;
- int times ;
-
- lcdClear (lcdHandle) ;
- start = millis () ;
- for (times = 0 ; times < 10 ; ++times)
- {
- lcdPuts (lcdHandle, "0123456789ABCDEF") ;
- lcdPuts (lcdHandle, "0123456789ABCDEF") ;
- }
- end = millis () ;
- taken = (end - start) / 10;
-
- lcdClear (lcdHandle) ;
- lcdPosition (lcdHandle, 0, 0) ; lcdPrintf (lcdHandle, "Speed: %dmS", taken) ;
- lcdPosition (lcdHandle, 0, 1) ; lcdPrintf (lcdHandle, "For full update") ;
-
- waitForEnter () ;
-
- lcdClear (lcdHandle) ;
- lcdPosition (lcdHandle, 0, 0) ; lcdPrintf (lcdHandle, "Time: %dmS", taken / 32) ;
- lcdPosition (lcdHandle, 0, 1) ; lcdPrintf (lcdHandle, "Per character") ;
-
- waitForEnter () ;
-
- lcdClear (lcdHandle) ;
- lcdPosition (lcdHandle, 0, 0) ; lcdPrintf (lcdHandle, "%d cps...", 32000 / taken) ;
-
- waitForEnter () ;
-}
-
-
-/*
- * The works
- *********************************************************************************
- */
-
-int main (int argc, char *argv[])
-{
- int colour ;
- int cols = 16 ;
- int waitForRelease = FALSE ;
-
- struct tm *t ;
- time_t tim ;
-
- char buf [32] ;
-
- if (argc != 2)
- return usage (argv [0]) ;
-
- printf ("Raspberry Pi Adafruit LCD test\n") ;
- printf ("==============================\n") ;
-
- colour = atoi (argv [1]) ;
-
- wiringPiSetupSys () ;
- mcp23017Setup (AF_BASE, 0x20) ;
-
- adafruitLCDSetup (colour) ;
-
- lcdPosition (lcdHandle, 0, 0) ; lcdPuts (lcdHandle, "Gordon Henderson") ;
- lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, " wiringpi.com ") ;
-
- waitForEnter () ;
-
- lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, "Adafruit RGB LCD") ;
-
- waitForEnter () ;
-
- lcdCharDef (lcdHandle, 2, newChar) ;
-
- lcdClear (lcdHandle) ;
- lcdPosition (lcdHandle, 0, 0) ;
- lcdPuts (lcdHandle, "User Char: ") ;
- lcdPutchar (lcdHandle, 2) ;
-
- lcdCursor (lcdHandle, TRUE) ;
- lcdCursorBlink (lcdHandle, TRUE) ;
-
- waitForEnter () ;
-
- lcdCursor (lcdHandle, FALSE) ;
- lcdCursorBlink (lcdHandle, FALSE) ;
-
- speedTest () ;
-
- lcdClear (lcdHandle) ;
-
- for (;;)
- {
- scrollMessage (0, cols) ;
-
- tim = time (NULL) ;
- t = localtime (&tim) ;
-
- sprintf (buf, "%02d:%02d:%02d", t->tm_hour, t->tm_min, t->tm_sec) ;
-
- lcdPosition (lcdHandle, (cols - 8) / 2, 1) ;
- lcdPuts (lcdHandle, buf) ;
-
-// Check buttons to cycle colour
-
-// If Up or Down are still pushed, then skip
-
- if (waitForRelease)
- {
- if ((digitalRead (AF_UP) == LOW) || (digitalRead (AF_DOWN) == LOW))
- continue ;
- else
- waitForRelease = FALSE ;
- }
-
- if (digitalRead (AF_UP) == LOW) // Pushed
- {
- colour = colour + 1 ;
- if (colour == 8)
- colour = 0 ;
- setBacklightColour (colour) ;
- waitForRelease = TRUE ;
- }
-
- if (digitalRead (AF_DOWN) == LOW) // Pushed
- {
- colour = colour - 1 ;
- if (colour == -1)
- colour = 7 ;
- setBacklightColour (colour) ;
- waitForRelease = TRUE ;
- }
-
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/lcd.c b/WiringPi/examples/lcd.c
deleted file mode 100644
index 510f562..0000000
--- a/WiringPi/examples/lcd.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * lcd.c:
- * Text-based LCD driver.
- * This is designed to drive the parallel interface LCD drivers
- * based in the Hitachi HD44780U controller and compatables.
- *
- * This test program assumes the following:
- *
- * 8-bit displays:
- * GPIO 0-7 is connected to display data pins 0-7.
- * GPIO 11 is the RS pin.
- * GPIO 10 is the Strobe/E pin.
- *
- * For 4-bit interface:
- * GPIO 4-7 is connected to display data pins 4-7.
- * GPIO 11 is the RS pin.
- * GPIO 10 is the Strobe/E pin.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-#include
-
-#include
-#include
-
-#ifndef TRUE
-# define TRUE (1==1)
-# define FALSE (1==2)
-#endif
-
-static unsigned char newChar [8] =
-{
- 0b11111,
- 0b10001,
- 0b10001,
- 0b10101,
- 0b11111,
- 0b10001,
- 0b10001,
- 0b11111,
-} ;
-
-
-// Global lcd handle:
-
-static int lcdHandle ;
-
-/*
- * usage:
- *********************************************************************************
- */
-
-int usage (const char *progName)
-{
- fprintf (stderr, "Usage: %s bits cols rows\n", progName) ;
- return EXIT_FAILURE ;
-}
-
-
-/*
- * scrollMessage:
- *********************************************************************************
- */
-
-static const char *message =
- " "
- "Wiring Pi by Gordon Henderson. HTTP://WIRINGPI.COM/"
- " " ;
-
-void scrollMessage (int line, int width)
-{
- char buf [32] ;
- static int position = 0 ;
- static int timer = 0 ;
-
- if (millis () < timer)
- return ;
-
- timer = millis () + 200 ;
-
- strncpy (buf, &message [position], width) ;
- buf [width] = 0 ;
- lcdPosition (lcdHandle, 0, line) ;
- lcdPuts (lcdHandle, buf) ;
-
- if (++position == (strlen (message) - width))
- position = 0 ;
-}
-
-
-/*
- * pingPong:
- * Bounce a character - only on 4-line displays
- *********************************************************************************
- */
-
-static void pingPong (int lcd, int cols)
-{
- static int position = 0 ;
- static int dir = 0 ;
-
- if (dir == 0) // Setup
- {
- dir = 1 ;
- lcdPosition (lcdHandle, 0, 3) ;
- lcdPutchar (lcdHandle, '*') ;
- return ;
- }
-
- lcdPosition (lcdHandle, position, 3) ;
- lcdPutchar (lcdHandle, ' ') ;
- position += dir ;
-
- if (position == cols)
- {
- dir = -1 ;
- --position ;
- }
-
- if (position < 0)
- {
- dir = 1 ;
- ++position ;
- }
-
- lcdPosition (lcdHandle, position, 3) ;
- lcdPutchar (lcdHandle, '#') ;
-}
-
-
-/*
- * waitForEnter:
- *********************************************************************************
- */
-
-static void waitForEnter (void)
-{
- printf ("Press ENTER to continue: ") ;
- (void)fgetc (stdin) ;
-}
-
-
-/*
- * The works
- *********************************************************************************
- */
-
-int main (int argc, char *argv[])
-{
- int i ;
- int lcd ;
- int bits, rows, cols ;
-
- struct tm *t ;
- time_t tim ;
-
- char buf [32] ;
-
- if (argc != 4)
- return usage (argv [0]) ;
-
- printf ("Raspberry Pi LCD test\n") ;
- printf ("=====================\n") ;
-
- bits = atoi (argv [1]) ;
- cols = atoi (argv [2]) ;
- rows = atoi (argv [3]) ;
-
- if (!((rows == 1) || (rows == 2) || (rows == 4)))
- {
- fprintf (stderr, "%s: rows must be 1, 2 or 4\n", argv [0]) ;
- return EXIT_FAILURE ;
- }
-
- if (!((cols == 16) || (cols == 20)))
- {
- fprintf (stderr, "%s: cols must be 16 or 20\n", argv [0]) ;
- return EXIT_FAILURE ;
- }
-
- wiringPiSetup () ;
-
- if (bits == 4)
- lcdHandle = lcdInit (rows, cols, 4, 11,10, 4,5,6,7,0,0,0,0) ;
- else
- lcdHandle = lcdInit (rows, cols, 8, 11,10, 0,1,2,3,4,5,6,7) ;
-
- if (lcdHandle < 0)
- {
- fprintf (stderr, "%s: lcdInit failed\n", argv [0]) ;
- return -1 ;
- }
-
- lcdPosition (lcdHandle, 0, 0) ; lcdPuts (lcdHandle, "Gordon Henderson") ;
- lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, " wiringpi.com ") ;
-
- waitForEnter () ;
-
- if (rows > 1)
- {
- lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, " wiringpi.com ") ;
-
- if (rows == 4)
- {
- lcdPosition (lcdHandle, 0, 2) ;
- for (i = 0 ; i < ((cols - 1) / 2) ; ++i)
- lcdPuts (lcdHandle, "=-") ;
- lcdPuts (lcdHandle, "=3") ;
-
- lcdPosition (lcdHandle, 0, 3) ;
- for (i = 0 ; i < ((cols - 1) / 2) ; ++i)
- lcdPuts (lcdHandle, "-=") ;
- lcdPuts (lcdHandle, "-4") ;
- }
- }
-
- waitForEnter () ;
-
- lcdCharDef (lcdHandle, 2, newChar) ;
-
- lcdClear (lcdHandle) ;
- lcdPosition (lcdHandle, 0, 0) ;
- lcdPuts (lcdHandle, "User Char: ") ;
- lcdPutchar (lcdHandle, 2) ;
-
- lcdCursor (lcdHandle, TRUE) ;
- lcdCursorBlink (lcdHandle, TRUE) ;
-
- waitForEnter () ;
-
- lcdCursor (lcdHandle, FALSE) ;
- lcdCursorBlink (lcdHandle, FALSE) ;
- lcdClear (lcdHandle) ;
-
- for (;;)
- {
- scrollMessage (0, cols) ;
-
- if (rows == 1)
- continue ;
-
- tim = time (NULL) ;
- t = localtime (&tim) ;
-
- sprintf (buf, "%02d:%02d:%02d", t->tm_hour, t->tm_min, t->tm_sec) ;
-
- lcdPosition (lcdHandle, (cols - 8) / 2, 1) ;
- lcdPuts (lcdHandle, buf) ;
-
- if (rows == 2)
- continue ;
-
- sprintf (buf, "%02d/%02d/%04d", t->tm_mday, t->tm_mon + 1, t->tm_year+1900) ;
-
- lcdPosition (lcdHandle, (cols - 10) / 2, 2) ;
- lcdPuts (lcdHandle, buf) ;
-
- pingPong (lcd, cols) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/lowPower.c b/WiringPi/examples/lowPower.c
deleted file mode 100644
index e901e7f..0000000
--- a/WiringPi/examples/lowPower.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * lowPower.c:
- * Check the Pi's LOW-Power signal.
- *
- * This is a demonstration program that could be turned into some sort
- * of logger via e.g. syslog - however it's also probably something
- * that might be better handled by a future kernel - who knows.
- *
- * Copyright (c) 2014 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-
-#define LOW_POWER 35
-
-/*
- * lowPower:
- * This is an ISR that waits for the low-power signal going low and
- * prints the result.
- *********************************************************************************
- */
-
-void lowPower (void)
-{
- time_t t ;
-
- time (&t) ;
- printf ("%s: LOW POWER DETECTED\n", ctime (&t)) ;
-}
-
-
-/*
- *********************************************************************************
- * main
- *********************************************************************************
- */
-
-int main (void)
-{
- wiringPiSetupGpio () ; // GPIO mode as it's an internal pin
-
- wiringPiISR (LOW_POWER, INT_EDGE_FALLING, &lowPower) ;
-
- for (;;)
- delay (1000) ;
-
- return 0 ;
-}
diff --git a/WiringPi/examples/nes.c b/WiringPi/examples/nes.c
deleted file mode 100644
index 31908e8..0000000
--- a/WiringPi/examples/nes.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * nes.c:
- * Test program for an old NES controller connected to the Pi.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-
-#define BLANK "| "
-
-int main ()
-{
- int joystick ;
- unsigned int buttons ;
-
- if (wiringPiSetup () == -1)
- {
- fprintf (stdout, "oops: %s\n", strerror (errno)) ;
- return 1 ;
- }
-
- if ((joystick = setupNesJoystick (2, 1, 0)) == -1)
- {
- fprintf (stdout, "Unable to setup joystick\n") ;
- return 1 ;
- }
-
- for (;;)
- {
- buttons = readNesJoystick (joystick) ;
-
- if ((buttons & NES_UP) != 0) printf ("| UP " ) ; else printf (BLANK) ;
- if ((buttons & NES_DOWN) != 0) printf ("| DOWN " ) ; else printf (BLANK) ;
- if ((buttons & NES_LEFT) != 0) printf ("| LEFT " ) ; else printf (BLANK) ;
- if ((buttons & NES_RIGHT) != 0) printf ("|RIGHT " ) ; else printf (BLANK) ;
- if ((buttons & NES_SELECT) != 0) printf ("|SELECT" ) ; else printf (BLANK) ;
- if ((buttons & NES_START) != 0) printf ("|START " ) ; else printf (BLANK) ;
- if ((buttons & NES_A) != 0) printf ("| A " ) ; else printf (BLANK) ;
- if ((buttons & NES_B) != 0) printf ("| B " ) ; else printf (BLANK) ;
- printf ("|\n") ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/okLed.c b/WiringPi/examples/okLed.c
deleted file mode 100644
index 930f266..0000000
--- a/WiringPi/examples/okLed.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * okLed.c:
- * Make the OK LED on the Pi Pulsate...
- *
- * Originally posted to the Raspberry Pi forums:
- * http://www.raspberrypi.org/phpBB3/viewtopic.php?p=162581#p162581
- *
- * Compile this and store it somewhere, then kick it off at boot time
- * e.g. by putting it in /etc/rc.local and running it in the
- * background &
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-
-// The OK/Act LED is connected to BCM_GPIO pin 16
-
-#define OK_LED 16
-
-int main ()
-{
- int fd, i ;
-
- wiringPiSetupGpio () ;
-
-// Change the trigger on the OK/Act LED to "none"
-
- if ((fd = open ("/sys/class/leds/led0/trigger", O_RDWR)) < 0)
- {
- fprintf (stderr, "Unable to change LED trigger: %s\n", strerror (errno)) ;
- return 1 ;
- }
- write (fd, "none\n", 5) ;
- close (fd) ;
-
- softPwmCreate (OK_LED, 0, 100) ;
-
- for (;;)
- {
- for (i = 0 ; i <= 100 ; ++i)
- {
- softPwmWrite (OK_LED, i) ;
- delay (10) ;
- }
- delay (50) ;
-
- for (i = 100 ; i >= 0 ; --i)
- {
- softPwmWrite (OK_LED, i) ;
- delay (10) ;
- }
- delay (10) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/pwm.c b/WiringPi/examples/pwm.c
deleted file mode 100644
index 816c832..0000000
--- a/WiringPi/examples/pwm.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * pwm.c:
- * This tests the hardware PWM channel.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-
-#include
-#include
-#include
-
-int main (void)
-{
- int bright ;
-
- printf ("Raspberry Pi wiringPi PWM test program\n") ;
-
- if (wiringPiSetup () == -1)
- exit (1) ;
-
- pinMode (1, PWM_OUTPUT) ;
-
- for (;;)
- {
- for (bright = 0 ; bright < 1024 ; ++bright)
- {
- pwmWrite (1, bright) ;
- delay (1) ;
- }
-
- for (bright = 1023 ; bright >= 0 ; --bright)
- {
- pwmWrite (1, bright) ;
- delay (1) ;
- }
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/q2w/Makefile b/WiringPi/examples/q2w/Makefile
deleted file mode 100644
index 150c825..0000000
--- a/WiringPi/examples/q2w/Makefile
+++ /dev/null
@@ -1,81 +0,0 @@
-#
-# Makefile:
-# wiringPi - Wiring Compatable library for the Raspberry Pi
-# https://projects.drogon.net/wiring-pi
-#
-# Copyright (c) 2012-2013 Gordon Henderson
-#################################################################################
-# This file is part of wiringPi:
-# Wiring Compatable library for the Raspberry Pi
-#
-# wiringPi is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# wiringPi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with wiringPi. If not, see .
-#################################################################################
-
-
-#DEBUG = -g -O0
-DEBUG = -O3
-CC = gcc
-INCLUDE = -I/usr/local/include
-CFLAGS = $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
-
-LDFLAGS = -L/usr/local/lib
-LDLIBS = -lwiringPi -lwiringPiDev -lpthread -lm
-
-###############################################################################
-
-SRC = blink.c button.c blink-io.c volts.c bright.c
-
-OBJ = $(SRC:.c=.o)
-
-BINS = $(SRC:.c=)
-
-all: $(BINS)
-
-blink: blink.o
- @echo [link]
- @$(CC) -o $@ blink.o $(LDFLAGS) $(LDLIBS)
-
-blink-io: blink-io.o
- @echo [link]
- @$(CC) -o $@ blink-io.o $(LDFLAGS) $(LDLIBS)
-
-button: button.o
- @echo [link]
- @$(CC) -o $@ button.o $(LDFLAGS) $(LDLIBS)
-
-volts: volts.o
- @echo [link]
- @$(CC) -o $@ volts.o $(LDFLAGS) $(LDLIBS)
-
-bright: bright.o
- @echo [link]
- @$(CC) -o $@ bright.o $(LDFLAGS) $(LDLIBS)
-
-
-.c.o:
- @echo [CC] $<
- @$(CC) -c $(CFLAGS) $< -o $@
-
-clean:
- @echo "[Clean]"
- @rm -f $(OBJ) *~ core tags $(BINS)
-
-tags: $(SRC)
- @echo [ctags]
- @ctags $(SRC)
-
-depend:
- makedepend -Y $(SRC)
-
-# DO NOT DELETE
diff --git a/WiringPi/examples/q2w/binary.c b/WiringPi/examples/q2w/binary.c
deleted file mode 100644
index 3c987c6..0000000
--- a/WiringPi/examples/q2w/binary.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * binary.c:
- * Using the Quick 2 wire 16-bit GPIO expansion board to output
- * a binary counter.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#define Q2W_BASE 100
-
-int main (void)
-{
- int i, bit ;
-
-// Enable the on-goard GPIO
-
- wiringPiSetup () ;
-
-// Add in the mcp23017 on the q2w board
-
- mcp23017Setup (Q2W_BASE, 0x20) ;
-
- printf ("Raspberry Pi - quite2Wire MCP23017 Test\n") ;
-
-// On-board button Input:
-
- pinMode (0, INPUT) ;
-
-// First 10 pins on q2w board as outputs:
-
- for (i = 0 ; i < 10 ; ++i)
- pinMode (Q2W_BASE + i, OUTPUT) ;
-
-// Last pin as an input with the internal pull-up enabled
-
- pinMode (Q2W_BASE + 15, INPUT) ;
- pullUpDnControl (Q2W_BASE + 15, PUD_UP) ;
-
-// Loop, outputting a binary number,
-// Go faster with the button, or stop if the
-// on-board button is pushed
-
- for (;;)
- {
- for (i = 0 ; i < 1024 ; ++i)
- {
- for (bit = 0 ; bit < 10 ; ++bit)
- digitalWrite (Q2W_BASE + bit, i & (1 << bit)) ;
-
- while (digitalRead (0) == HIGH) // While pushed
- delay (1) ;
-
- if (digitalRead (Q2W_BASE + 15) == HIGH) // Not Pushed
- delay (100) ;
- }
- }
- return 0 ;
-}
diff --git a/WiringPi/examples/q2w/blink-io.c b/WiringPi/examples/q2w/blink-io.c
deleted file mode 100644
index 4dd4276..0000000
--- a/WiringPi/examples/q2w/blink-io.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * blink-io.c:
- * Simple "blink" test for the Quick2Wire 16-pin IO board.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#define LED 1
-#define Q2W_BASE 100
-
-int main (void)
-{
-
-// Enable the on-goard GPIO
-
- wiringPiSetup () ;
-
-// Add in the mcp23017 on the q2w board
-
- mcp23017Setup (Q2W_BASE, 0x20) ;
-
- printf ("Raspberry Pi - Quick2Wire MCP23017 Blink Test\n") ;
-
-// Blink the on-board LED as well as one on the mcp23017
-
- pinMode (LED, OUTPUT) ;
- pinMode (Q2W_BASE + 0, OUTPUT) ;
-
- for (;;)
- {
- digitalWrite (LED, HIGH) ;
- digitalWrite (Q2W_BASE + 0, HIGH) ;
- delay (500) ;
- digitalWrite (LED, LOW) ;
- digitalWrite (Q2W_BASE + 0, LOW) ;
- delay (500) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/q2w/blink.c b/WiringPi/examples/q2w/blink.c
deleted file mode 100644
index 62b694a..0000000
--- a/WiringPi/examples/q2w/blink.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * blink.c:
- * Simple "blink" test for the Quick2Wire interface board.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-#define LED 1
-
-int main (void)
-{
-
-// Enable the on-goard GPIO
-
- wiringPiSetup () ;
-
- printf ("Raspberry Pi - Quick2Wire Mainboard LED Blink Test\n") ;
-
- pinMode (LED, OUTPUT) ;
-
- for (;;)
- {
- digitalWrite (LED, HIGH) ;
- delay (500) ;
- digitalWrite (LED, LOW) ;
- delay (500) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/q2w/blink.sh b/WiringPi/examples/q2w/blink.sh
deleted file mode 100755
index 2dee6c7..0000000
--- a/WiringPi/examples/q2w/blink.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# blink.sh:
-# Standard "blink" program in wiringPi. Blinks an LED connected
-# to the LED on the Quick2Wire board
-#
-# Copyright (c) 2012-2013 Gordon Henderson.
-#######################################################################
-# This file is part of wiringPi:
-# https://projects.drogon.net/raspberry-pi/wiringpi/
-#
-# wiringPi is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# wiringPi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with wiringPi. If not, see .
-#######################################################################
-
-# LED Pin - wiringPi pin 1 is BCM_GPIO 18.
-
-LED=1
-
-gpio mode $LED out
-
-while true; do
- gpio write $LED 1
- sleep 0.5
- gpio write $LED 0
- sleep 0.5
-done
diff --git a/WiringPi/examples/q2w/bright.c b/WiringPi/examples/q2w/bright.c
deleted file mode 100644
index 2318834..0000000
--- a/WiringPi/examples/q2w/bright.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * bright.c:
- * Vary the Q2W LED brightness with the analog card
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#define LED 1
-#define Q2W_ABASE 120
-
-int main (void)
-{
- int value ;
-
-// Enable the on-goard GPIO
-
- wiringPiSetup () ;
-
-// Add in the pcf8591 on the q2w board
-
- pcf8591Setup (Q2W_ABASE, 0x48) ;
-
- printf ("Raspberry Pi - Quick2Wire Analog Test\n") ;
-
-// Setup the LED
-
- pinMode (LED, PWM_OUTPUT) ;
- pwmWrite (LED, 0) ;
-
- for (;;)
- {
- value = analogRead (Q2W_ABASE + 0) ;
- pwmWrite (LED, value * 4) ;
- delay (10) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/q2w/button.c b/WiringPi/examples/q2w/button.c
deleted file mode 100644
index 1781f02..0000000
--- a/WiringPi/examples/q2w/button.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * button.c:
- * Simple button test for the Quick2Wire interface board.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-
-#define BUTTON 0
-#define LED1 1
-#define LED2 7
-
-int main (void)
-{
-
-// Enable the on-goard GPIO
-
- wiringPiSetup () ;
-
- printf ("Raspberry Pi - Quick2Wire Mainboard Button & LED Test\n") ;
-
- pinMode (BUTTON, INPUT) ;
- pinMode (LED1, OUTPUT) ;
- pinMode (LED2, OUTPUT) ;
-
- digitalWrite (LED1, HIGH) ; // On-board LED on
- digitalWrite (LED2, LOW) ; // 2nd LED off
-
- for (;;)
- {
- if (digitalRead (BUTTON) == HIGH) // Swap LED states
- {
- digitalWrite (LED1, LOW) ;
- digitalWrite (LED2, HIGH) ;
- while (digitalRead (BUTTON) == HIGH)
- delay (1) ;
- digitalWrite (LED1, HIGH) ;
- digitalWrite (LED2, LOW) ;
- }
- delay (1) ;
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/q2w/volts.c b/WiringPi/examples/q2w/volts.c
deleted file mode 100644
index e091093..0000000
--- a/WiringPi/examples/q2w/volts.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * volts.c:
- * Read in all 4 analogs on the Q2W analog board.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#define LED 1
-#define Q2W_ABASE 120
-
-int main (void)
-{
- int value, pin ;
-
-// Enable the on-goard GPIO
-
- wiringPiSetup () ;
-
- pinMode (LED, OUTPUT) ; // On-board LED
-
-// Add in the pcf8591 on the q2w board
-
- pcf8591Setup (Q2W_ABASE, 0x48) ;
-
- printf ("Raspberry Pi - Quick2Wire Voltmeter\n") ;
-
- for (;;)
- {
- for (pin = 0 ; pin < 4 ; ++pin)
- {
- value = analogRead (Q2W_ABASE + pin) ;
- printf (" %5.2f", (double)value * 3.3 / 255.0) ;
- }
- printf ("\r") ; fflush (stdout) ;
-
- delay (100) ;
- digitalWrite (LED, !digitalRead (LED)) ; // Flicker the LED
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/rht03.c b/WiringPi/examples/rht03.c
deleted file mode 100644
index 566e954..0000000
--- a/WiringPi/examples/rht03.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * rht03.c:
- * Driver for the MaxDetect series sensors
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-
-#include
-#include
-
-#define RHT03_PIN 0
-
-/*
- ***********************************************************************
- * The main program
- ***********************************************************************
- */
-
-int main (void)
-{
- int temp, rh ;
- int newTemp, newRh ;
-
- temp = rh = newTemp = newRh = 0 ;
-
- wiringPiSetup () ;
- piHiPri (55) ;
-
- for (;;)
- {
- delay (100) ;
-
- if (!readRHT03 (RHT03_PIN, &newTemp, &newRh))
- continue ;
-
- if ((temp != newTemp) || (rh != newRh))
- {
- temp = newTemp ;
- rh = newRh ;
- if ((temp & 0x8000) != 0) // Negative
- {
- temp &= 0x7FFF ;
- temp = -temp ;
- }
- printf ("Temp: %5.1f, RH: %5.1f%%\n", temp / 10.0, rh / 10.0) ;
- }
- }
-
- return 0 ;
-}
diff --git a/WiringPi/examples/serialRead.c b/WiringPi/examples/serialRead.c
deleted file mode 100644
index 9ee11ac..0000000
--- a/WiringPi/examples/serialRead.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * serial.c:
- * Example program to read bytes from the Serial line
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-
-int main ()
-{
- int fd ;
-
- if ((fd = serialOpen ("/dev/ttyAMA0", 115200)) < 0)
- {
- fprintf (stderr, "Unable to open serial device: %s\n", strerror (errno)) ;
- return 1 ;
- }
-
-// Loop, getting and printing characters
-
- for (;;)
- {
- putchar (serialGetchar (fd)) ;
- fflush (stdout) ;
- }
-}
diff --git a/WiringPi/examples/serialTest.c b/WiringPi/examples/serialTest.c
deleted file mode 100644
index 0d6da5f..0000000
--- a/WiringPi/examples/serialTest.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * serialTest.c:
- * Very simple program to test the serial port. Expects
- * the port to be looped back to itself
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-
-int main ()
-{
- int fd ;
- int count ;
- unsigned int nextTime ;
-
- if ((fd = serialOpen ("/dev/ttyAMA0", 115200)) < 0)
- {
- fprintf (stderr, "Unable to open serial device: %s\n", strerror (errno)) ;
- return 1 ;
- }
-
- if (wiringPiSetup () == -1)
- {
- fprintf (stdout, "Unable to start wiringPi: %s\n", strerror (errno)) ;
- return 1 ;
- }
-
- nextTime = millis () + 300 ;
-
- for (count = 0 ; count < 256 ; )
- {
- if (millis () > nextTime)
- {
- printf ("\nOut: %3d: ", count) ;
- fflush (stdout) ;
- serialPutchar (fd, count) ;
- nextTime += 300 ;
- ++count ;
- }
-
- delay (3) ;
-
- while (serialDataAvail (fd))
- {
- printf (" -> %3d", serialGetchar (fd)) ;
- fflush (stdout) ;
- }
- }
-
- printf ("\n") ;
- return 0 ;
-}
diff --git a/WiringPi/examples/servo.c b/WiringPi/examples/servo.c
deleted file mode 100644
index aa1ab05..0000000
--- a/WiringPi/examples/servo.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * servo.c:
- * Test of the softServo code.
- * Do not use this code - use the servoBlaster kernel module instead
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-
-int main ()
-{
- if (wiringPiSetup () == -1)
- {
- fprintf (stdout, "oops: %s\n", strerror (errno)) ;
- return 1 ;
- }
-
- softServoSetup (0, 1, 2, 3, 4, 5, 6, 7) ;
-
- softServoWrite (0, 0) ;
-/*
- softServoWrite (1, 1000) ;
- softServoWrite (2, 1100) ;
- softServoWrite (3, 1200) ;
- softServoWrite (4, 1300) ;
- softServoWrite (5, 1400) ;
- softServoWrite (6, 1500) ;
- softServoWrite (7, 2200) ;
-*/
-
- for (;;)
- delay (10) ;
-
-}
diff --git a/WiringPi/examples/softPwm.c b/WiringPi/examples/softPwm.c
deleted file mode 100644
index 11f7ad0..0000000
--- a/WiringPi/examples/softPwm.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * softPwm.c:
- * Test of the software PWM driver. Needs 8 LEDs connected
- * to the Pi - e.g. Ladder board.
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include
-
-#include
-#include
-
-#define RANGE 100
-#define NUM_LEDS 8
-
-int ledMap [NUM_LEDS] = { 0, 1, 2, 3, 4, 5, 6, 7 } ;
-
-int values [NUM_LEDS] = { 0, 25, 50, 75, 100, 75, 50, 25 } ;
-
-int main ()
-{
- int i, j ;
- char buf [80] ;
-
- wiringPiSetup () ;
-
- for (i = 0 ; i < NUM_LEDS ; ++i)
- {
- softPwmCreate (ledMap [i], 0, RANGE) ;
- printf ("%3d, %3d, %3d\n", i, ledMap [i], values [i]) ;
- }
-
- fgets (buf, 80, stdin) ;
-
-// Bring all up one by one:
-
- for (i = 0 ; i < NUM_LEDS ; ++i)
- for (j = 0 ; j <= 100 ; ++j)
- {
- softPwmWrite (ledMap [i], j) ;
- delay (10) ;
- }
-
- fgets (buf, 80, stdin) ;
-
-// All Down
-
- for (i = 100 ; i > 0 ; --i)
- {
- for (j = 0 ; j < NUM_LEDS ; ++j)
- softPwmWrite (ledMap [j], i) ;
- delay (10) ;
- }
-
- fgets (buf, 80, stdin) ;
-
- for (;;)
- {
- for (i = 0 ; i < NUM_LEDS ; ++i)
- softPwmWrite (ledMap [i], values [i]) ;
-
- delay (50) ;
-
- i = values [0] ;
- for (j = 0 ; j < NUM_LEDS - 1 ; ++j)
- values [j] = values [j + 1] ;
- values [NUM_LEDS - 1] = i ;
- }
-}
diff --git a/WiringPi/examples/softTone.c b/WiringPi/examples/softTone.c
deleted file mode 100644
index 2f46783..0000000
--- a/WiringPi/examples/softTone.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * softTone.c:
- * Test of the softTone module in wiringPi
- * Plays a scale out on pin 3 - connect pizeo disc to pin 3 & 0v
- *
- * Copyright (c) 2012-2013 Gordon Henderson.
- ***********************************************************************
- * This file is part of wiringPi:
- * https://projects.drogon.net/raspberry-pi/wiringpi/
- *
- * wiringPi is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * wiringPi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with wiringPi. If not, see .
- ***********************************************************************
- */
-
-#include
-#include
-#include